What the thread found

• A custom CNC-machined bracket system allows independent adjustment of monitor position and battery position on Pilot and Scout rigs, similar to the Zephyr design
• The modification enables adjustment of monitor height and panning inertia while minimizing effects on rig balance
• The system works with monitors featuring 1/4-20 side-mount threads, including Marshall, Steadicam, TVLogic, and some SmallHD models
• The bracket clamps onto 15mm rods which mount to the rig post at a measured diameter of 23.9mm
• The design was developed for group manufacturing to share production costs of approximately 200 USD per complete set
• The Pilot, Scout, Zephyr, and Archer models share the same carbon fiber post dimensions
• Monitors without side-mount threads can be mounted using 15mm brackets and a ball head adapter instead

Depends on

• The system was designed with Marshall and Steadicam 7-inch HD monitors as the primary reference
• Not all 7-inch monitors are compatible due to varying mount thread availability
• Compatibility with Flyer LE post dimensions remains unconfirmed
• Small HD AC7 monitor was noted as lacking side-mount threads and would require alternative mounting methods
• The modification provides minimal benefit for Zephyr rigs which already have similar monitor positioning flexibility

Gear in this thread

Zephyrcatalog

Same gear or parts

1. 2026Steadicam® A-30 lower arm segment stiffness and squeaking after warranty service; bearing ring contact hypothesis.FacebookSteadicam operators group
2. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.DisputedFacebookSteadicam operators group
3. 2026First stabilizer purchase: Steadicam® Elite (14 kg payload, integrated Volt 3) versus Rever Evo (higher payload) and used-market strategy.DisputedFacebookThe Steadicam Group
4. 2026Removing a stuck aircraft pin from a used Steadicam® Zephyr arm connection block and reconfiguring to goofy modeFacebookSteadicam operators group