What the thread found

• The PRO to Preston power cable cannot be used with a Bartech follow focus system because the power input connectors are different types of Lemo connectors.
• The Bartech operates on 12 volts while the PRO focus system uses different pin configurations in its Lemo connector for Preston compatibility.

Depends on

• This discussion is from 2007 and may not reflect current equipment designs.
• Only basic incompatibility is confirmed; no technical details about specific connector types or voltage requirements are provided.

Parts

Follow Focus

Same gear or parts

1. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
3. 2025LC-1 (Lens Control-1) follow focus system: wired architecture, motors, and early operational experience (1990s).FacebookThe Steadicam Group
4. 2024Modifications to a Steadicam Scout rig for expanded power distribution and connectivityGeneral Discussion