What the thread found

• The V2 Antlers feature improved riser centering adjustment for different dovetail plate arrangements and a new weight retention system where weights clamp themselves without requiring separate collars.
• V2 weights are constructed from steel with black zinc plating instead of bronze, chosen due to cost considerations while maintaining visual compatibility with Steadicam finishes.
• The dovetail grabber uses a new hole pattern optimized for lightening and improved rigidity.
• Antlers pose a safety risk on set and can cause injury to crew members; operators should implement protective measures such as colored tape for visibility, foam padding from pipe insulation, or audible warning devices.
• The risk of accidental contact with Antlers can be mitigated by making crew aware of their presence through visibility and sound.
• Specific aftermarket solutions mentioned include wrapping colored tape around the weight outer diameter, cutting tennis balls in half as padding, or adding small bells for audible warning.

Depends on

• Discussion centers on one manufacturer's V2 version from 2007; applicability to other Steadicam weight systems unclear.
• Safety recommendations are operator suggestions rather than manufacturer specifications or tested standards.
• No formal impact testing or safety data provided for the proposed protective solutions.

Parts

Dovetail Plate

Same gear or parts

1. 2026Swapping the camera between tripod and rig: the cheapest upgrade most operators never makeOperator practice
2. 2026Eliminating vibration with the ARRI ALEXA 35 on Steadicam®: rigid mounting plate options to bypass the dovetail systemFacebookThe Steadicam Group
3. 2026Tightening a loose quick-release lever on the Top Stage dovetail plate, and preventing camera slip during shoulder operation.DisputedFacebookThe Steadicam Group
4. 2026Managing weight constraints when flying large-format film cameras with heavy anamorphic lenses on a Steadicam rigGeneral Discussion