What the thread found

• The Stanton zoom/focus controller can be mounted on the Zephyr crane handle
• The Stanton controller uses a 2-pin lemo power connector while the Zephyr sled provides 12/24 volt three-pin lemo connections, requiring an adapter to connect them
• The Zephyr sled has two 12/24 volt three-pin lemo power connections available for accessories

Depends on

• The user did not provide follow-up results from the planned live event
• The compatibility was not confirmed through actual use at the time of the discussion

Gear in this thread

Zephyrcatalog

Same gear or parts

1. 2026Steadicam® A-30 lower arm segment stiffness and squeaking after warranty service; bearing ring contact hypothesis.FacebookSteadicam operators group
2. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.DisputedFacebookSteadicam operators group
3. 2026First stabilizer purchase: Steadicam® Elite (14 kg payload, integrated Volt 3) versus Rever Evo (higher payload) and used-market strategy.DisputedFacebookThe Steadicam Group
4. 2026Removing a stuck aircraft pin from a used Steadicam® Zephyr arm connection block and reconfiguring to goofy modeFacebookSteadicam operators group