What the thread found

• Mounting a dovetail plate to the Alexa top handle can achieve a lower camera position by a few inches
• Previous experience with similar mounting on other equipment produced minimal vibration
• The Alexa top handle construction appears sturdy enough to support this mounting approach
• Camera image flip functionality was not available in standard Alexa firmware at the time of discussion
• Flipping the physical camera upside down creates workflow complications because multiple monitor stations on set cannot easily flip their displays
• Mounting from the top handle became a practical necessity for achieving low mode positioning on Alexa cameras when image flip was unavailable

Depends on

• The vibration issue was only tested with different equipment, not specifically with Alexa top handle mounting
• Only one shot was planned for the specific shoot mentioned, providing limited opportunity to fully evaluate the technique
• Firmware updates mentioned were not yet widely deployed, with older firmware versions still in circulation
• Multiple monitor stations on set made the workaround of flipping displays impractical

Parts

Dovetail Plate, Low Mode

Same gear or parts

1. 2026Vest drops: what lowering the arm socket actually buys, and what it costs at the topOperator practice
2. 2026Eliminating vibration with the ARRI ALEXA 35 on Steadicam®: rigid mounting plate options to bypass the dovetail systemFacebookThe Steadicam Group
3. 2026Lemo connectors on the ARRI Artemis sled: pinout, polarity verification, and powering low-mode monitors and Volt battery.FacebookSteadicam operators group
4. 2026Swapping the camera between tripod and rig: the cheapest upgrade most operators never makeOperator practice