2025From SteadiHub members
Sourcing the external power cable for ARRI Trinity 2 head (part K2.0048481) and supply availability.
Note (as of October 2026)Curt O. Schaller, the developer of Artemis and Trinity, has no longer been with ARRI since the end of 2025. To our knowledge, ARRI currently has no dedicated team and no official contact persons for its stabilizer systems. In our view, the future of this line is uncertain. If you are buying new, get written confirmation from ARRI beforehand on how long service and spare parts are guaranteed. Have used rigs checked by the manufacturer before you buy.
What the thread found
- The external power cable for ARRI Trinity 2 head is identified by part code K2.0048481.
- The cable connects to the battery hanger module or accepts 2×XLR connectors for external power input.
- The part became difficult to locate on ARRI's official website Trinity 2 cables page, prompting operators to seek alternative sourcing.
- Third-party suppliers stock this cable, though its removal from the manufacturer's product page created temporary supply confusion.
Depends on
- Specific reason for ARRI removing the part from their published product page was not stated.
Gear in this thread
Same gear or parts
- 2026Buying strategy for a 25,000 USD entry-level rig: used Artemis-1 with Flowcine X-Arm versus Rever-Evo Sled, and the case for learning on budget equipment firstDisputedFacebookThe Steadicam Group
- 2026Low-mode monitor selection for Volt Brain rig: latency performance of Transvideo Starlite versus current alternatives.DisputedFacebookThe Steadicam Group
- 2026Trinity 2 tilt and roll drift in standard operation, and MGT-2 remote control connection causing pan and roll instability via LBUS.SteadiHub
- 2026Mounting a Mo-Sys LED-wall tracking sensor on ARRI Trinity 2 with the sensor oriented upward for virtual production.FacebookArri Artemis Trinity