What the thread found

• The camera mounting screw on the Steadicam Flyer24 LE is a 1/4-20 screw specification, which is standard and widely available.
• Button cap screws work as functional replacements for the original base plate mounting screw.
• When matching a replacement screw, the key is determining the correct length through testing multiple options from a hardware store or supplier.

Depends on

• The advice is based on experience with Steadicam Flyer and Pilot models, with some uncertainty about exact compatibility across the Flyer24 LE variant.
• Original manufacturer replacement screws were not identified as readily available through standard channels at the time of the discussion.

Parts

Base Plate

Same gear or parts

1. 2026Operating a Steadicam® Zephyr without Volt: drop time, horizon control, and the effect of upper-rig weight distribution on balance.DisputedFacebookSteadicam operators group
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
3. 2026Swapping the camera between tripod and rig: the cheapest upgrade most operators never makeOperator practice
4. 2026Camera adapter plates and stabilizer mounting systems to keep in a steadicam operator kitGeneral Discussion