What the thread found

• The Tiffen G-70 arm has 3/4 inch diameter posts while the VZ Pro gimbal uses 5/8 inch posts
• Tiffen part number 800-7204-03 is designed as an adapter between G-70 and 5/8 inch gimbal connections
• The standard adapter may have insufficient post length for proper fit with the VZ Pro gimbal
• GPI previously manufactured delrin sleeves that could adapt different arm post sizes

Depends on

• The adapter post length issue was reported but not fully resolved in this thread
• Suggested workarounds such as contacting manufacturers directly were recommended but no final solution was documented
• Information about alternative adapters from other manufacturers was mentioned but not detailed

Gear in this thread

G-70catalog

Parts

Arm Post

Same gear or parts

1. 2026Vest drops: what lowering the arm socket actually buys, and what it costs at the topOperator practice
2. 2026Recommended upgrade priorities for a GPI Pro steadicam rigSteadi-Newbies
3. 2026Rocket Arm (elastic band arm) versus traditional spring arms like the G70x: performance, weight, build, and design dispute.DisputedFacebookThe Steadicam Group
4. 2025Differences between M-1 and M-2 gimbal designsGeneral Discussion