What the thread found

• A live-to-air Steadicam shot through hallways and doorways was executed with only one camera and no backup angle or contingency plan
• The operator used an Artemis sled paired with a Sony P1 camera and Canon J14 lens
• A Boxx Meridian wireless system provided video transmission, data control, return vision, and prompting capability
• A G70 arm allowed real-time trim adjustments during the live broadcast depending on shot requirements
• The shot was rehearsed twice during dress rehearsal but executed live without additional preparation
• Standby cabled handheld cameras were available but disconnected once the live broadcast began

Depends on

• The discussion contains speculation about rig details before the operator provided confirmation
• Video resolution was too low for detailed analysis of equipment shadows
• No information provided about the specific setup choices or why certain backup procedures were avoided

Gear in this thread

Artemiscatalog, G-70catalog

Same gear or parts

1. 2026Why a 150 Wh battery at the sled powers the camera for only ~20 minutes versus two to three times longer when mounted on-body, and how to extend runtime.DisputedFacebookThe Steadicam Group
2. 2026Repairing shorted BNC video lines in an ARRI Artemis 1 sled: interim workarounds and permanent solutions.FacebookSteadicam operators group
3. 2026Evaluating whether to repair an older ProVid 2 system or invest in a newer rig for entry-level steadicam workSteadi-Newbies
4. 2026Power loss on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.DisputedFacebookArri Artemis Trinity