What the thread found

• The HPX3000 outputs HD and SD video simultaneously from its side connectors.
• The camera can run for approximately nine hours on six Powercubes total.
• Multiple video outputs are available including HD-SDI, SDI, and analog video options, allowing simultaneous feeds to different destinations.
• The camera's menu structure and settings are similar to the Varicam, including the ability to save and load configurations via SD card for multi-camera work.
• Weight distribution matters when using heavy lenses like Zeiss DigiZoom 6-24s, with rear-mounted accessories helping balance the setup.
• NTSC output settings require proper configuration for different display formats like 16x9 widescreen.

Depends on

• The vfgadgets handle was unavailable at the time of discussion.
• One user reported intermittent settings loss on their B-camera.
• Discussion focused on one specific production setup; other configurations may differ.
• No detailed information provided about matrix settings or gamma adjustments for achieving specific looks.

Gear in this thread

Moduluscatalog

Parts

Dovetail Plate

Same gear or parts

1. 2026Swapping the camera between tripod and rig: the cheapest upgrade most operators never makeOperator practice
2. 2026Eliminating vibration with the ARRI ALEXA 35 on Steadicam®: rigid mounting plate options to bypass the dovetail systemFacebookThe Steadicam Group
3. 2026Tightening a loose quick-release lever on the Top Stage dovetail plate, and preventing camera slip during shoulder operation.DisputedFacebookThe Steadicam Group
4. 2026Managing weight constraints when flying large-format film cameras with heavy anamorphic lenses on a Steadicam rigGeneral Discussion