What the thread found

• Vibrations visible in rushes can result from improper camera mounting, specifically when the back pin locking mechanism is not secured.
• The mounting plate and wedge used between camera and rig significantly affect vibration issues, with proper Steadicam-specific plates and wedges being critical for eliminating the problem.
• Operators commonly experience better results using stock professional dovetails and dedicated Alexa plates rather than generic mounting solutions.
• Operators often choose to supply their own mounting plates and wedges as part of their personal gear package to ensure proper setup and avoid relying on rental company equipment.
• Vibration issues can occur during focus adjustment operations when using inadequate mounting hardware.
• Proper mounting includes both a Steadicam-specific plate at the bottom and a secondary plate at the top for accessory mounting.

Depends on

• The discussion involves specific equipment from a rental company that may vary by location and facility.
• One participant mentioned a tutorial by another operator but did not provide detailed technical specifications about the solution.
• The thread does not include measurements of vibration frequency or detailed analysis of the mechanical cause.

Parts

Dovetail Plate

Same gear or parts

1. 2026Eliminating vibration with the ARRI ALEXA 35 on Steadicam®: rigid mounting plate options to bypass the dovetail systemFacebookThe Steadicam Group
2. 2026Tightening a loose quick-release lever on the Top Stage dovetail plate, and preventing camera slip during shoulder operation.DisputedFacebookThe Steadicam Group
3. 2026Swapping the camera between tripod and rig: the cheapest upgrade most operators never makeOperator practice
4. 2026Managing weight constraints when flying large-format film cameras with heavy anamorphic lenses on a Steadicam rigGeneral Discussion