What the thread found

• RED One MX camera with basic setup and prime lens may exceed the practical payload capacity of a Zephyr sled despite appearing to fall within arm strength limits
• Additional accessories and mounting hardware can significantly increase the total weight of a RED camera package beyond the camera body weight alone

Depends on

• The claim is based on a brief warning without detailed technical explanation
• No specific weight specifications or payload limits for the Zephyr were provided in the discussion
• The actual configuration tested and the specific accessories involved were not detailed

Gear in this thread

Zephyrcatalog

Same gear or parts

1. 2026Steadicam® A-30 lower arm segment stiffness and squeaking after warranty service; bearing ring contact hypothesis.FacebookSteadicam operators group
2. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.DisputedFacebookSteadicam operators group
3. 2026First stabilizer purchase: Steadicam® Elite (14 kg payload, integrated Volt 3) versus Rever Evo (higher payload) and used-market strategy.DisputedFacebookThe Steadicam Group
4. 2026Removing a stuck aircraft pin from a used Steadicam® Zephyr arm connection block and reconfiguring to goofy modeFacebookSteadicam operators group