2022Batteries/Power forum
Comparison of Anton Bauer Titon 150 and Beebob 150 Micro batteries for gimbal stabilizer systems
What the thread found
- The Anton Bauer Titon 150 weighs 1.09 kg while the Beebob 150 Micro weighs 0.77 kg, with both using the same Gold Mount and having identical capacity.
- Battery weight placement affects gimbal balancing: heavier batteries on the sled bottom can counterbalance large camera builds and keep the post compact, but may require moving the gimbal farther down on lighter camera setups to achieve proper drop time.
- The Zephyr gimbal system has a 10.4 kg total payload capacity that is inclusive of all components including batteries, monitor, and camera package.
- Anton Bauer batteries are reported to be reliable and performing well in field use.
- Beebob batteries have received positive feedback though the source had no direct on-set experience with them.
Depends on
- The discussion does not provide comparative testing data between the two battery models.
- Anton Bauer experience is personal use while Beebob assessment is based on secondhand reports only.
- Battery choice optimization depends heavily on the specific camera package weight and gimbal configuration, which varies per project.
- The payload calculation example given assumes specific mounting configurations that may not apply to all user setups.
Gear in this thread
Same gear or parts
- 2026Steadicam® A-30 lower arm segment stiffness and squeaking after warranty service; bearing ring contact hypothesis.FacebookSteadicam operators group
- 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.DisputedFacebookSteadicam operators group
- 2026First stabilizer purchase: Steadicam® Elite (14 kg payload, integrated Volt 3) versus Rever Evo (higher payload) and used-market strategy.DisputedFacebookThe Steadicam Group
- 2026Removing a stuck aircraft pin from a used Steadicam® Zephyr arm connection block and reconfiguring to goofy modeFacebookSteadicam operators group