What the thread found

• The FlyerLE has a single power port on the camera stage that can be split using a custom breakout box to provide multiple output connectors.
• A custom breakout box converting a single 3-pin Lemo connector to multiple 3-pin Lemo outputs can be commissioned from experienced cable technicians.
• Lemo manufactures splitter adapters specifically designed for Flyer and FlyerLE models that provide one male input and two female outputs.
• Power distribution solutions that bypass the original port rather than consuming it allow the main port to remain available for additional connections.
• Before implementing power solutions, verify that total power draw remains within the sled's specifications by consulting the manufacturer.
• The FlyerLE gimbal and post are physically limited in capacity and weight limitations should be strictly observed to avoid performance degradation and equipment damage.
• Junction boxes with multiple output connector types (P-tap, XLR, Tiffen, etc.) can be wired directly to the sled to maximize available power ports.
• A Sony F3 can power itself from its own batteries while the FlyerLE power port supplies focus motor and video transmitter systems.
• The BFD wireless receiver is more practical than a FIZ system on an F3 due to space constraints on the FlyerLE stage.

Depends on

• Solutions are specific to FlyerLE limitations and may not apply to full-size rigs.
• Weight capacity must be verified and respected to prevent equipment damage.
• Connector compatibility depends on existing cables and future needs.
• Space on the camera stage is limited for mounting auxiliary equipment.
• These solutions work within the stated power capacity of the rig and should not be assumed to work beyond those limits.

Gear in this thread

FI+Z, MDR, BFD

Parts

Base Plate

Same gear or parts

1. 2026Power loss on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.DisputedFacebookArri Artemis Trinity
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
3. 2026Operating a Steadicam® Zephyr without Volt: drop time, horizon control, and the effect of upper-rig weight distribution on balance.DisputedFacebookSteadicam operators group
4. 2026Swapping the camera between tripod and rig: the cheapest upgrade most operators never makeOperator practice