What the thread found

• The side-to-side adjustment knob should move with the same ease as the forward-backward adjustment knob.
• Stiff side-to-side adjustment can be resolved by loosening the button head socket screws on the stage top, then re-torquing them gradually while testing the cross shaft for binding.
• If re-torquing the button head screws does not solve the problem, the set screws in the dovetail can be backed off by approximately 1/16 of a turn, then the button heads can be re-tightened while ensuring the dovetail plate has no play.
• Over-tightening the adjustment screws can create excessive play in the dovetail plate and requires careful repositioning to achieve smooth operation.

Depends on

• The specific hex size mentioned (1/8 inch) and screw locations apply to the Flyer camera rig model discussed; compatibility with other models is unclear.
• The procedure requires trial and adjustment to find the correct torque point.
• No technical reason for the initial stiffness was identified in the discussion.

Parts

Dovetail Plate

Same gear or parts

1. 2026Tightening a loose quick-release lever on the Top Stage dovetail plate, and preventing camera slip during shoulder operation.DisputedFacebookThe Steadicam Group
2. 2026Eliminating vibration with the ARRI ALEXA 35 on Steadicam®: rigid mounting plate options to bypass the dovetail systemFacebookThe Steadicam Group
3. 2026Swapping the camera between tripod and rig: the cheapest upgrade most operators never makeOperator practice
4. 2026Managing weight constraints when flying large-format film cameras with heavy anamorphic lenses on a Steadicam rigGeneral Discussion