What the thread found

• A Transvideo mounting bracket exists for this monitor setup but is described as not particularly sturdy despite being functional, costing around 100 euros.
• An alternative monitor option from the Archer rig manufacturer includes a frameline generator and reaches 750 nits brightness, with mounting points compatible with standard 1/4-20 screws.
• The HR10-7P-6P 6-pin male Hirose connector can be used to combine video and power delivery over a single cable when both the monitor and camera equipment feature matching Hirose connectors.
• A Ted Churchill design monitor bracket was reported to work well for this application.
• A Marrell bubble frameline generator solution includes a VDA allowing a single feed with both bubble and generator to the monitor plus two separate clear feeds to transmitter and onboard recorder.

Depends on

• The Transvideo option required an additional $1,200 USD for a separate frameline generator, making the total cost prohibitive for the original requester.
• Confidence in the Transvideo bracket's structural integrity was questioned despite its functionality.
• The compatibility and fitment of alternative monitor solutions to specific EFP rigs depends on exact camera configuration and available mounting points.
• Pin-out details for adapting cables to specific EFP models would need to be confirmed based on individual equipment.

Parts

Monitor Bracket

Same gear or parts

1. 2026Finding a bright (1500–2000 nits) low-mode monitor with recording and SDI I/O to replace a defective Transvideo Starlite.DisputedFacebookSteadicam operators group
2. 2026Mounting a Mo-Sys LED-wall tracking sensor on ARRI Trinity 2 with the sensor oriented upward for virtual production.FacebookArri Artemis Trinity
3. 2026Modernizing Steadicam® PRO sled: Gen-2 battery holder retrofit and universal monitor bracket on the tube collar.FacebookSteadicam operators group
4. 2026Powering everything from the sled: voltage, current, and why the two get confusedOperator practice