What the thread found

• A 1x4 VAC-Brick distribution amplifier can be installed internally in an MK-V Nexus sled to provide multiple buffered video outputs without signal degradation to connected devices.
• Without an internal distribution amplifier, each device connected to a sled's video output causes the monitor brightness to decrease due to loading effects.
• An internal distribution amplifier installation in a Nexus base requires careful evaluation of available space, as the PRO2 base has more room for modifications than the standard Nexus.
• Distribution amplifiers are available from Nebtek in both raw component and pre-assembled forms.

Depends on

• The feasibility of fitting a distribution amplifier inside a Nexus base was questioned by one user due to space constraints.
• The thread discusses one specific installation example and does not indicate how widespread this modification is.
• Pricing and service details mentioned are specific to one technician and may not represent current market conditions.

Gear in this thread

Moduluscatalog

Same gear or parts

1. 2022Power connector pinout for Master Greenscreen CRT monitor with 6-pin Hirose connectorMonitors
2. 2017Wireless teleprompter setups for steadicam operationGeneral Discussion
3. 2016Performance and reliability characteristics of Tiltamax wireless video transmitters compared to competing brandsDisputedVideo Assist and Video Accessories
4. 2014DC voltage converter box with adjustable output range and protection featuresDisputedGeneral Discussion