What the thread found

• A custom grip wrap can increase the Zephyr gimbal grip diameter from its standard size to approximately 2.2 inches, providing noticeably better control and precision when operating larger rigs.
• The custom grip is manufactured from ABS plastic using a professional 3D printer with tolerances down to 0.1mm, featuring hidden fasteners and a textured surface.
• Users reported that the larger diameter grip diameter makes subtle movements easier to control and improves lockoff performance.
• The wrap grip design uses the flat spots on the original Zephyr grip to lock in place and can be installed without removing the original grip.

Depends on

• This is a custom third-party accessory, not an official product from the equipment manufacturer.
• The final diameter was settled at 2.2 inches after testing multiple options, suggesting comfort preferences may vary between operators.
• Manufacturing time and precision requirements make this a specialty item rather than a standard upgrade.

Gear in this thread

Zephyrcatalog

Same gear or parts

1. 2026Tightening a loose quick-release lever on the Top Stage dovetail plate, and preventing camera slip during shoulder operation.DisputedFacebookThe Steadicam Group
2. 2026Steadicam® A-30 lower arm segment stiffness and squeaking after warranty service; bearing ring contact hypothesis.FacebookSteadicam operators group
3. 2026Rigging a Steadicam® Zephyr with Sony FX6 to an off-road vehicle (UTV) for live transmission: Hard Mount preparation and alternativesFacebookSteadicam operators group
4. 2026Techniques for maintaining level horizons while operating a SteadicamGeneral Discussion