What the thread found

• Plates can slip in a well-used DB2, particularly during dynamic camera movements like tilting
• The locking mechanism becomes worn over time and loses clamping force
• Buildup of gunk between the stage and tightening mechanism contributes to poor grip and can be partially resolved by cleaning
• PRO plates are slightly wider than Tiffen and third-party plates, making them harder to clamp securely in a DB2
• Slimmer plates have greater risk of slipping in a DB2 than wider plates
• Temporary solutions include applying gaff tape to the plate or latch to increase thickness and improve clamping
• The DB3 model addresses this issue with increased clamping capability compared to the DB2
• XCS plates provide a tighter fit and more rigid connection than standard plates in a DB2
• Replacement DB2 levers from the manufacturer are expensive and come with no guarantee of improved compatibility with third-party plates

Depends on

• The issue particularly affects older, well-used DB2 units
• Compatibility problems exist specifically between DB2 and certain plate brands
• No factory solution exists that guarantees improved clamping for all plate types in the DB2
• The tolerance of the locking mechanism is extremely tight with almost no margin for variation

Parts

Follow Focus

Same gear or parts

1. 2026Pulling focus and zoom yourself while operating, especially on live showsOperator practice
2. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
3. 2025LC-1 (Lens Control-1) follow focus system: wired architecture, motors, and early operational experience (1990s).FacebookThe Steadicam Group
4. 2024Modifications to a Steadicam Scout rig for expanded power distribution and connectivityGeneral Discussion