What operators found

• One operator reported a procedure discussed with the manufacturer: remove the spring canister and canister bolt, flush the chassis with water, clean with shampoo and soft sponge, rinse, dry thoroughly, use compressed air to remove water from bearings and gaps, and dry immediately.2018 FacebookDisputed
• A manufacturer demonstrated a socket-block holder that positions the block approximately 140 mm (5.5 inches) lower on the Exovest front mount compared to standard placement.2018 FacebookDisputed
• The manufacturer claims the NB ARM requires minimal re-tensioning when switching between lightweight prime lenses and heavy zoom lenses, and performs identically at 47 °C and in cold winter conditions.2018 FacebookDisputed
• The Starlight HD monitor can be mounted to the top rods of a Pro HD II sled to serve as a low-mode monitor in the correct position2018 Brackets/Widgets
• A strong electrostatic shock during preparation in a cold carpeted environment can trigger failure of power protection devices in camera support systems, potentially damaging multiple circuit components2018 Sled
• Browser autofill can cause login failures if it populates the username field with an outdated format that no longer matches the current account format.2018 Forum SupportDisputed

Still argued about

1. 2018Cleaning a GPI PRO Titan Arm after exposure to sweat and salt water: procedure, materials, and risksFacebookThe Steadicam Group
2. 2018Lower socket-block mounting on the Exovest for Low-Mode operation and operator reachFacebookThe Steadicam Group
3. 2018Rubber-band stabilizer arm (NB ARM) vs. spring-based arms for daily use: temperature stability, load sensitivity, and maintenance demandsFacebookThe Steadicam Group

Often in the same threads

Zephyr11, Top Stage10, Follow Focus8, Low Mode5, G-70X3, Master Series3, Volt3, xARM3, Artemis2, BFD2, Docking Bracket2, Dovetail Plate2

All threads

1. 2018Cleaning a GPI PRO Titan Arm after exposure to sweat and salt water: procedure, materials, and risksDisputedFacebookThe Steadicam Group
2. 2018Lower socket-block mounting on the Exovest for Low-Mode operation and operator reachDisputedFacebookThe Steadicam Group
3. 2018Rubber-band stabilizer arm (NB ARM) vs. spring-based arms for daily use: temperature stability, load sensitivity, and maintenance demandsDisputedFacebookThe Steadicam Group
4. 2018Mounting a Starlight HD monitor to a Pro HD II sled for use as a low-mode monitorBrackets/Widgets
5. 2018Intermittent electrical issues in a modified cinema camera sled following electrostatic discharge damageSled
6. 2018Repeated password reset requirement despite correct credentialsDisputedForum Support
7. 2018Compatibility considerations when replacing a camera stabilizer center post with a different modelCenter Post
8. 2018Comparison of Aero 30 and Zephyr steadicam rigs for lightweight camera packagesGeneral Discussion
9. 2018Best practices for docking a camera sled in low modeDisputedSteadi-Newbies
10. 2018Arm mounting solution for cinema camera support cartsArms
11. 2018Converting composite video line to HD on Master series camera sledGeneral Discussion
12. 2018Advantages and disadvantages of tilted versus flat stages for camera cranesCamera Stage/Donkey Box
13. 2018Safety equipment and rigging for camera operators working on vehicle-mounted shotsVehicles and Mounts
14. 2018Arm X1 stabilizer arm specifications and user experienceArms
15. 2018Reasons for wearing gloves during Steadicam operationSteadi-Newbies
16. 2018Noise in CLM-3 motors on ARRI WCU-3 wireless focus system and lubrication optionsGeneral Discussion
17. 2018Wireless video transmission systems for steadicam on film setsGeneral Discussion
18. 2018Managing excessive sweating while operating a steadicam rigSteadi-Newbies
19. 2018Strategies for securing personal belongings while operating on film setsGeneral Discussion
20. 2018Compatibility of heavier arms and sleds with Zephyr vest and upgrade considerationsVests
21. 2018Lightweight camera stabilizer rigs suitable for carrying multiple mounted accessoriesGeneral Discussion
22. 2018Achieving dynamic balance on a Flyer LE gimbal systemSteadi-Newbies
23. 2018Getting started as a steadicam operator and building a career in the fieldSteadi-Newbies
24. 2018Wireless follow focus system reliability and performance issuesFollow Focus
25. 2018Evaluating used Steadicam Master Series rigs versus newer systems for operators starting outGeneral Discussion
26. 2018MustHD 703S Hyper-Brite monitor performance and practical use for Steadicam workDisputedMonitors
27. 2018Choosing a beginner steadicam rig setup with budget constraintsSteadi-Newbies
28. 2018Starting a career as a steadicam operator on a budgetSteadi-Newbies
29. 2018Steadicam framing technique when subject ducks under obstaclesSteadicam Aesthetics
30. 2018Experience and reliability of Vaxis wireless video transmission systemsGeneral Discussion
31. 2018Comparison of M1VOLT and WAVE 1 stabilization systems for camera sledsGeneral Discussion
32. 2018Suitability of Archer 2 sled with G50-X arm for typical camera setups in professional workGeneral Discussion
33. 2018Compatibility of Pro-standard dovetail plates with M1 stage camera supportCamera Stage/Donkey Box
34. 2018Mounting a microforce zoom control on an Arrihead camera head using the slider railBrackets/Widgets
35. 2018Adjustment and maintenance of screws on the Archer 2 gimbalGimbal
36. 2018Combining Wave-1 stabilizer with gyro stabilization systemsGeneral Discussion
37. 2018Body rig producing visible step bounce compared to handheld steadycam operationOperating
38. 2018Mounting DBII camera stage directly to EFP MK-V carbon fiber post without Pro electronics boxCamera Stage/Donkey Box
39. 2018Comparison of Tiffen M1 and GPI/PRO modular sleds for film camera stabilizationSled
40. 2018Vest selection for tall, slim operatorsVests