What the thread found

• The Flyer Gimbal has a black ring containing the bearings that can be accessed after removing the sled, gimbal, handle, and yoke.
• Removing and reinstalling gimbal bearings risks damaging the bearing races.
• Disassembling the yoke from the gimbal is unnecessary for bearing cleaning and creates difficulties during reassembly.
• Reassembly of gimbal components can result in extra washers or misalignment issues.
• The manufacturer offers servicing as an alternative to performing bearing maintenance independently.

Depends on

• The experience described is from a beginner operator attempting the task for the first time without expert guidance.
• The bearing damage occurred during reinstallation, suggesting the procedure requires significant technical skill.
• Reassembly complications were not fully resolved before the equipment was returned to use.
• The claim about insurance coverage for damage is anecdotal and outcome is unknown.
• No detailed cleaning procedure or specific tools were documented in this thread.

Parts

Gimbal Bearing

Same gear or parts

1. 2026Gimbal bearing lubrication: oil quantity, product selection, and the performance versus protection trade-off.DisputedFacebookThe Steadicam Group
2. 2026Removing a PRO gimbal from a VZ grip for conversion to a Volt-modified gimbal.DisputedFacebookSteadicam operators group
3. 2026Pan-bearing friction and image oscillation in Tiffen gimbals with Volt power cable: root cause and acceptance criteria.DisputedFacebookThe Steadicam Group
4. 2026PRO-Pan bearing sourcing change and specification differences between PRO and Tiffen gimbal bearingsFacebookThe Steadicam Group