What the thread found

• The second generation Flyer has an official weight limit of 15 pounds, which a bare SR3 camera body alone will approach or exceed.
• Replacing the original thumb screw assembly with a kipp handle and locking wedge mechanism provides significantly better security for camera mounting.
• An SR3 mounted on a Flyer LE can be flown successfully when using a lightweight third-party baseplate such as Zacuto instead of the standard Arri baseplate system.
• Powering the camera through the rig via 24-volt connection eliminates the need for an on-board battery, reducing overall weight.
• Using lightweight prime lenses, clip-on sunshades, and lightweight follow focus systems helps keep the total camera package within practical weight limits.
• A gripping pad placed between the camera and the mounting plate increases friction and helps prevent slipping under movement.
• Reinforcement bands made from bicycle tire tubes can provide additional security for heavier setups.

Depends on

• The official weight limit of 15 pounds is regularly exceeded when mounting an SR3 with typical accessories, which can stress the rig.
• Successfully flying an SR3 requires careful component selection and typically means excluding certain equipment like heavy matte boxes.
• One user reported achieving 19 pounds with power running through the rig, suggesting performance varies with configuration.
• The weight management strategies discussed are specific to this camera and rig combination and may not apply to other equipment.

Gear in this thread

Zephyrcatalog

Parts

Follow Focus, Base Plate

Same gear or parts

1. 2026Steadicam® A-30 lower arm segment stiffness and squeaking after warranty service; bearing ring contact hypothesis.FacebookSteadicam operators group
2. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.DisputedFacebookSteadicam operators group
3. 2026Removing a stuck aircraft pin from a used Steadicam® Zephyr arm connection block and reconfiguring to goofy modeFacebookSteadicam operators group
4. 2026Discontinuation of Steadicam® Aero 30 and Axis entry-level rigs, availability of service and spare parts for discontinued models, and purchasing strategy alternatives.DisputedFacebookThe Steadicam Group