What the thread found

• The original built-in CRT green screen monitor on a Provid sled offers high contrast and performs well in bright sunlight and with film video taps.
• A 1.5 inch monitor bracket with adjustable rods can be added to the Provid sled to mount an additional LCD monitor while retaining the original CRT, allowing flexibility for different shooting conditions and maintaining dynamic balance.
• The original CRT can be removed and replaced with a 16x9 HD monitor by rewiring the sled mounting hardware.
• A Sachtler Artemis monitor bracket is suitable for mounting alternative monitors on the Provid sled.
• Keeping the original CRT and adding a supplementary monitor bracket is recommended if you regularly work in both standard and HD formats.

Depends on

• The rewiring approach for replacing the CRT with an HD monitor was described as an example but no detailed instructions were provided.
• The specific mounting bracket photos were requested but not included in the thread.
• Monitor upgrade choices depend on whether work is primarily HD or mixed format.

Gear in this thread

Artemiscatalog

Parts

Monitor Bracket

Same gear or parts

1. 2026Upgrading an M1 Volt gimbal from 1.5-inch to 1.75-inch center rod: insert replacement procedure and encoder ring considerations.DisputedFacebookSteadicam operators group
2. 2026MK-V Level horizon stabilizer: specifications, plate compatibility, price, and comparison to Wave.DisputedFacebookThe Steadicam Group
3. 2026Buying strategy for a 25,000 USD entry-level rig: used Artemis-1 with Flowcine X-Arm versus Rever-Evo Sled, and the case for learning on budget equipment firstDisputedFacebookThe Steadicam Group
4. 2026Repairing shorted BNC video lines in an ARRI Artemis 1 sled: interim workarounds and permanent solutions.FacebookSteadicam operators group