What the thread found

• The KI-12-D inverter is designed for 12V and does not tolerate higher voltages well.
• Fully charged lithium batteries can deliver overvoltage that damages standard 12V inverters.
• Kenyon offers a dedicated 14.4V inverter as the proper solution for higher voltage batteries.
• A voltage regulator module can be retrofitted to step down 14.8V input to compatible levels for standard inverters.
• Using a 7812S voltage regulator as a step-down solution allows operation of dual gyros without excessive heat generation.

Depends on

• The discussion dates to 2009 and may not reflect current product availability.
• The regulator-based workaround was a temporary field solution by one operator, not officially tested or endorsed.
• No detailed specifications given for the regulator installation or heat management under sustained use.

Gear in this thread

KS-4

Same gear or parts

1. 2025Minimizing pan drift on straight architectural shots with ARRI Trinity 2: gyro solutions, sled configuration, and operator technique.FacebookArri Artemis Trinity
2. 2024New Volt prototype with pan axis: whip pans with telephoto and implications for operator skill.DisputedFacebookThe Steadicam Group
3. 2023Flying the ARRI Trinity in X-Mode (Omega-style, camera lateral to body) for table-top passes using tilt control via post rotation.DisputedFacebookArri Artemis Trinity
4. 2023Using gyroscopes with Volt camera stabilizersDisputedGeneral Discussion