2023From a Facebook group: Arri Artemis Trinity
Using a Hill docking collar beneath the blue ARRI docking collar on the carbon post of Artemis/Trinity.
Note (as of October 2026)Curt O. Schaller, the developer of Artemis and Trinity, has no longer been with ARRI since the end of 2025. To our knowledge, ARRI currently has no dedicated team and no official contact persons for its stabilizer systems. In our view, the future of this line is uncertain. If you are buying new, get written confirmation from ARRI beforehand on how long service and spare parts are guaranteed. Have used rigs checked by the manufacturer before you buy.
What the thread found
- Multiple Trinity operators dock this way without problems, and the stacked setup simplifies switching between different rigs.
- The collar on the carbon post should not be overtightened, as it tends to migrate upward over time against the ARRI collar.
- The ARRI dock continues to be used for initial assembly and post-load changes.
Gear in this thread
Parts
Same gear or parts
- 2026Repairing shorted BNC video lines in an ARRI Artemis 1 sled: interim workarounds and permanent solutions.FacebookSteadicam operators group
- 2026Evaluating whether to repair an older ProVid 2 system or invest in a newer rig for entry-level steadicam workSteadi-Newbies
- 2026Why a 150 Wh battery at the sled powers the camera for only ~20 minutes versus two to three times longer when mounted on-body, and how to extend runtime.DisputedFacebookThe Steadicam Group
- 2026Powering camera, monitor, and accessories simultaneously on ARRI Artemis with BMS battery bricks and matching battery plates.SteadiHub