What the thread found

• The Alexa 35 is a native 24 V camera and does not require 26 V batteries; switch the sled to 24 V mode and supply it via a 24 V cable.
• One operator reported reliable operation with three 12 V Gold Mount batteries in series (24 V mode) on the sled.
• ARRI cameras are typically designed for native 24 V operation.
• Two 12 V batteries in series provide longer runtime than the same batteries in parallel configuration, because current draw is halved at the higher voltage.
• A 12/24 V XLR Gold Mount plate combined with a 24 V 4-pin XLR to CineLive cable is one viable setup; alternatively, power the camera battery slot directly.

Depends on

• Configuration depends on battery capacity and rig power draw.

Gear in this thread

ALEXA 35catalog, CineLivecatalog

Same gear or parts

1. 2026Low mode and flipping the image: what to check on the camera before the dayOperator practice
2. 2026Mounting the RIA-1 wireless receiver on ARRI Trinity with ALEXA 35FacebookArri Artemis Trinity
3. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group
4. 2026Eliminating vibration with the ARRI ALEXA 35 on Steadicam®: rigid mounting plate options to bypass the dovetail systemFacebookThe Steadicam Group