What the thread found

• The 3-pin connector is identical across ALEXA Mini, Mini LF, and ALEXA 35 cameras, but external inspection cannot determine whether the cable is wired for 12 V or 24 V operation.
• To identify cable voltage: unscrew the coupling nut on the 3-pin connector and inspect the pin configuration, verify with a multimeter, or read the voltage display on the camera itself.
• The critical difference is whether pins 6, 7, and 8 of the 8-pin camera connector are routed to the 12 V or 24 V pins of the sled connector.
• For 24 V operation, set the sled to 24 V and install batteries in the correct positions; if the cable is wired for 12 V, an ALEXA 35 will not operate regardless of sled setting.

Depends on

• Sled model and power tap configuration.
• Cable age and manufacturing batch.

Gear in this thread

ALEXA 35catalog

Same gear or parts

1. 2026Eliminating vibration with the ARRI ALEXA 35 on Steadicam®: rigid mounting plate options to bypass the dovetail systemFacebookThe Steadicam Group
2. 2026Mounting the RIA-1 wireless receiver on ARRI Trinity with ALEXA 35FacebookArri Artemis Trinity
3. 2026Power distribution failure of D-Tap step-down splitters on a Venice 2 rig, and proper AKS accessory power supply methods.DisputedFacebookSteadicam operators group
4. 2026Swapping an ARRI ALEXA 35 between tripod/studio and Steadicam® mounting: baseplate choice and fastest workflow.FacebookSteadicam operators group