Ce que les opérateurs ont constaté

• Some focus pullers prefer monitoring focus visually on a display rather than relying solely on distance estimation between camera and subject2009 Follow FocusControversé
• A wireless video transmitter that transmits video to a monitor experiences signal breakup resembling a bad wired connection when the camera operator moves, resulting in total picture loss.2009 Video Assist and Video Accessories
• A demo reel should showcase work from actual productions rather than practice footage with friends and family2009 Steadi-Newbies
• The Steadicam Flyer is regarded by experienced operators as superior in quality and performance compared to the Glidecam X-22.2009 Steadi-NewbiesControversé
• Operating a steadicam while skating requires exceptional skating ability beforehand, regardless of skate type, and carries significant risk of equipment damage and personal injury2009 Vehicles and Mounts
• The WEVI Cam Wave is designed for 12V operation and will be damaged if exposed to 24V power2009 Video Assist and Video AccessoriesControversé

Toujours débattu

1. 2009Integrating video monitors with wireless follow focus systems for focus pullingFollow Focus
2. 2009Choosing between Steadicam Flyer LE and Glidecam X-22 for first-time stabilizer purchaseSteadi-Newbies
3. 2009WEVI Cam Wave wireless device failure when used with 24V Steadicam Master Series setupVideo Assist and Video Accessories

Souvent dans les mêmes discussions

Follow Focus57, Low Mode32, BFD24, Top Stage20, Modulus17, MDR15, G-7013, HU310, Master Series10, Artemis8, Dovetail Plate8, Arm Post7

Toutes les discussions

1. 2009Integrating video monitors with wireless follow focus systems for focus pullingControverséFollow Focus
2. 2009Wireless video transmitter performance issues with movementVideo Assist and Video Accessories
3. 2009Advice for building a demo reel as a beginner steadicam operatorSteadi-Newbies
4. 2009Choosing between Steadicam Flyer LE and Glidecam X-22 for first-time stabilizer purchaseControverséSteadi-Newbies
5. 2009Using rollerskates and inline skates while operating a steadicam rigVehicles and Mounts
6. 2009WEVI Cam Wave wireless device failure when used with 24V Steadicam Master Series setupControverséVideo Assist and Video Accessories
7. 2009Remote focus systems for Canon 5D Mark II and similar camerasFollow Focus
8. 2009Methods for labeling and identifying equipment, cables, and bracketsGeneral Discussion
9. 2009Choosing a stabilizer system as a beginner for light camera workSteadi-Newbies
10. 2009nanoFlash video recorder capabilities, limitations, and operational featuresVideo Assist and Video Accessories
11. 2009HD cable selection and construction for broadcast camera to deck connectionsControverséBrackets/Widgets
12. 2009Steadicam Pilot vest modification with buckles instead of velcroSteadi-Newbies
13. 2009Evaluation of a budget camera pan/tilt head deviceGeneral Discussion
14. 2009Modifying the Steadicam Pilot gimbal handle and post diameter for improved comfort and stabilityControverséGimbal
15. 2009Heden M21VE follow focus motor capabilities and characteristicsFollow Focus
16. 2009ARRI HDM-7 monitor specifications and market positioningMonitors
17. 2009Selecting and configuring a steadicam rig for the first time at a professional level with a budget of around 30 pounds camera capacitySled
18. 2009Flexing and practical use of J-brackets on steadicam arms with various post lengths and payloadsBrackets/Widgets
19. 2009Modifying a BFD cable to work with Steadicam Archer stage using 3-pin LEMO connectorVideo Assist and Video Accessories
20. 2009Steadicam operating techniques and equipment setup for DSLR music video productionGeneral Discussion
21. 2009Flash-based HD/SD recorder capabilities and practical considerations for video productionVideo Assist and Video Accessories
22. 2009Rigging and stabilization techniques for Canon 7D video camera workCameras (Film/Video/HD)
23. 2009Off-road camera platform options for steadicam work in the LA areaVehicles and Mounts
24. 2009Troubleshooting a Chosziel Genio follow focus receiver showing error lights and motor power failure after a dropFollow Focus
25. 2009Tyler gyroscopic stabilization system for camera mountingGeneral Discussion
26. 2009Squeaking noise in PRO Vest bottom spar and solutionsVests
27. 2009Practical gift ideas for assistant camera operatorsGeneral Discussion
28. 2009Using long telephoto lenses on Steadicam rigs and operational challengesOperating
29. 2009Transitioning from freelance steadicam work to a full-time TV station positionSteadi-Newbies
30. 2009Effect of post length on camera rig stability and performanceControverséOperating
31. 2009Starting a Steadicam career on a limited budget with used rigs under $30,000ControverséSteadi-Newbies
32. 2009Comparison of stabilizer sleds and arms for professional camera workControverséSled
33. 2009Pressure from low-ball rates in the steadicam operator market eroding professional compensation standardsControverséLegal / Business Practices
34. 2009Adapters for converting between AB-mount and V-lock battery connectorsBatteries/Power
35. 2009Evaluation of budget portable video recorders as alternatives to Archos devicesVideo Assist and Video Accessories
36. 2009Building experience and starting a Steadicam operator career after initial trainingSteadi-Newbies
37. 2009Slide plate orientation for dual-camera stereo rig on SteadicamSteadi-Newbies
38. 2009Sources for lightweight Triax cables and affordable zoom/focus control systems for steadicam rigsBrackets/Widgets
39. 2009Planning and executing a long steadicam shot through a cafe that transitions from live action to a staged shootoutJournals
40. 2009Steadicam rig detachment incidents caused by operator falls or missteps during operationGeneral Discussion
41. 2009Executing an extremely slow Steadicam move for a music video onerControverséSteadi-Newbies
42. 2009Stabilizing roll movement and preserving equipment setup on a shared Steadicam Flyer LE rigSteadi-Newbies
43. 2009Warning signs and patterns of fraudulent film production contacts targeting crew and equipment rentalLegal / Business Practices
44. 2009Whether to invest in gyroscopic stabilization systems for camera rigs in windy conditionsBrackets/Widgets
45. 2009Steadicam operation setup and techniques for daily cooking show productionSteadicam Aesthetics
46. 2009Merlin steadicam losing balance after being set down and exhibiting continuous pendulum motionSteadi-Newbies
47. 2009Choosing between Steadicam rigs for professional use with specific camera systemsSled
48. 2009Compatibility issues when using H.264 video files with Flash and different editing softwareOff Topic
49. 2009Gimbal-mounted zoom control solutions for follow focus after Preston discontinued their analog microforce controllerControverséFollow Focus
50. 2009Evaluation of Glidecam V.16 stabilizer as a beginner learning toolSteadi-Newbies
51. 2009Audio capture methods and wireless microphone systems for camera recordingSteadi-Newbies
52. 2009Power supply options for Camos video monitors using different battery plate typesVideo Assist and Video Accessories
53. 2009Safety considerations when mounting V-Mount transmitters on Steadicam rigs with dual battery platesVideo Assist and Video Accessories
54. 2009Creaking sounds in Steadicam Pilot arm joints and how to fix themSteadi-Newbies
55. 2009Panavision 16mm Elaine camera specifications and operational characteristicsCameras (Film/Video/HD)
56. 2009Lightweight BNC cable selection for HD-SDI applicationsControverséGeneral Discussion
57. 2009Strategies for quickly switching a camera between Steadicam and traditional mounted configurationsBrackets/Widgets
58. 2009Flying a Panasonic VariCam on a Flyer stabilizer rigCameras (Film/Video/HD)
59. 2009Steadicam equipment setup and workflow considerations for a first professional shootControverséSteadi-Newbies
60. 2009Replacing cells in AB Proformer battery packsControverséBatteries/Power
61. 2009Launching a steadicam operating business while working on student filmsSteadi-Newbies
62. 2009D-tap power distribution cables and adapters for professional HD video productionBatteries/Power
63. 2009Ultra2 gimbal clicking noise and fore-aft balance issues during tiltingControverséGimbal
64. 2009F35 camera downconverter and auxiliary power outputsCameras (Film/Video/HD)
65. 2009Comparison of back-mounted Walter Klassen vests versus front-mounted camera support vestsControverséVests
66. 2009Screw sizes for Anton Bauer gold mount battery platesBatteries/Power
67. 2009How to handle insurance coverage for small equipment items and best practices for documenting gear inventoryLegal / Business Practices
68. 2009Causes and solutions for lower back pain when operating a Steadicam rigSteadi-Newbies
69. 2009Flying RED cameras on EFP stabilizers with weight management strategiesGeneral Discussion
70. 2009Compatibility of AR system with camera rigs other than Mk-VSled
71. 2009Nebtek SolarHD 7-SC monitor performance and mounting options for on-set video workMonitors
72. 2009iPhone-based iris control system for cinema cameras via wireless connectionFollow Focus
73. 2009How deferred payment agreements work for spec film projectsLegal / Business Practices
74. 2009Building a 3D stereoscopic camera rig based on the Merlin stabilizerSteadi-Newbies
75. 2009Hytron 50 battery charging behavior on Anton Bauer Interactive 2000 chargerBatteries/Power
76. 2009Declining steadicam operator rates and strategies for industry-wide price coordinationControverséLegal / Business Practices
77. 2009Comparing back-mount and front-mount steadicam vests for different shooting scenarios and physical comfortControverséVests
78. 2009Running SR2 camera from steadicam rig power instead of on-board batteriesControverséCameras (Film/Video/HD)
79. 2009Steadyrig silver spring arm weight capacity for heavy camera packagesArms
80. 2009Weight of a Panavision Gold camera configured for Steadicam useCameras (Film/Video/HD)
81. 2009Lightweight 19mm support rods for camera rigsBrackets/Widgets
82. 2009Steadicam operator and equipment rental rates in professional production marketsControverséLegal / Business Practices
83. 2009Hold harmless agreements for film production work involving explosives and pyrotechnicsLegal / Business Practices
84. 2009Wireless video transmission options for RED cameras in rental situationsVideo Assist and Video Accessories
85. 2009Using Canon 1D Mark IV still camera for video work with professional monitoring and focus pulling solutionsGeneral Discussion
86. 2009Video signal blackout when connecting RED camera SDI output through multiple devices in signal chainControverséVideo Assist and Video Accessories
87. 2009Selecting an appropriate Steadicam rig for stepping up from a Glidecam system to handle professional feature film work with heavier cameras like the RED.Steadi-Newbies
88. 2009Stabilization equipment choices for filming from a moving vehicle at highway speedsVehicles and Mounts
89. 2009Monitor visibility problems in outdoor sunlight conditionsMonitors
90. 2009Steadicam rigging and preparation for operating with a BL4S film cameraControverséCameras (Film/Video/HD)
91. 2009Wearing lumbar support belts under steadicam vests for back supportControverséVests
92. 2009Hidden costs of budget cuts on low-budget film productionsGeneral Discussion
93. 2009Pinout configuration for 5-pin Lemo connectors on FMG 6 follow focus systemFollow Focus
94. 2009Flyer LE sled connector types and power distribution for accessoriesSteadi-Newbies
95. 2009Follow focus gear compatibility and mounting setup for JVC GY-HD200U cameraCameras (Film/Video/HD)
96. 2009Feedback on steadicam showreel editing and presentation for job prospectsSteadi-Newbies
97. 2009Protecting steadicam operator business through contracts and advance commitment before personal financial investmentLegal / Business Practices
98. 2009Finding follow focus rental equipment in Southern California and New YorkFollow Focus
99. 2009Footwear and beach protection for camera operators working on sandOperating
100. 2009Master Gimbal servicing and balancing proceduresControverséGimbal
101. 2009Fiber optic transmission systems for cinema cameras in Steadicam applicationsVideo Assist and Video Accessories
102. 2009Using unlocked iPhones on T-Mobile instead of AT&TOff Topic
103. 2009Boom arm weakness and muscle fatigue during extended operatingOperating
104. 2009Selecting a Steadicam rig weight capacity for television production workSteadi-Newbies
105. 2009Modifying Ultra 2 vest padding for improved comfortControverséVests
106. 2009Experience with Marshall V-LCD651ST-3GSDI 6.5-inch on-set monitor and comparison to alternativesMonitors
107. 2009Finding and securing Steadicam work as a new operatorControverséLegal / Business Practices
108. 2009Extending the grip length on a second-generation Flyer gimbal for better controlGimbal
109. 2009Wireless microphone and camera setup for a Taylor Swift live performance recorded on a subway trainGeneral Discussion
110. 2009Equipment investment strategy for steadicam operators regarding HD downconvertersVideo Assist and Video Accessories
111. 2009Wedding videography camera setup and stabilization techniques using handheld and mounted rigsJournals
112. 2009Distinguishing Transvideo IIIa Standard from Superbright monitors and evaluating anti-reflective coatingsMonitors
113. 2009Comparison of Porta Brace hard cases with Pelican and Storm cases for equipment protectionCases/Carts/Stands and Transport
114. 2009IDX Cam Wave HD video transmission compatibility issues with Panasonic Varicam and frame rate supportVideo Assist and Video Accessories
115. 2009Evaluation of Titan HD wireless video transmission system for professional video monitoringVideo Assist and Video Accessories
116. 2009Finding short BNC antennas for 72.790 MHz wireless systemsFollow Focus
117. 2009Stabilizer camera rig compatibility and performance comparison from IBC 2009ControverséNews, Events, Workshops
118. 2009Flight case options for protecting camera equipment during air transportCases/Carts/Stands and Transport
119. 2009Powering KS4 gyro with 14.8V lithium batteries and inverter compatibilityBrackets/Widgets
120. 2009Power connectors and cable requirements for Panavised and stock Sony F35 cameras on Steadicam rigsControverséCameras (Film/Video/HD)
121. 2009Unauthorized use of footage in professional demo reels by other camera operatorsControverséLegal / Business Practices
122. 2009Troubleshooting non-functional 4-pin video/power port on XCS Ultimate sledSled
123. 2009Quicktime blocked by Windows DEP after Vista Service PackOff Topic
124. 2009Vertical bounce effect when performing 360-degree circular shots with a SteadicamControverséOperating
125. 2009Changing forum thread display format from outline view to see all posts at onceForum Support
126. 2009Using a Steadicam rig with a Canon 1D Mark III for still photography with strobesGeneral Discussion
127. 2009Powering a BFD follow focus receiver from a Red One cameraFollow Focus
128. 2009Career entry strategy for becoming a Steadicam operator in European televisionSteadi-Newbies
129. 2009Steadi Pilot stabilizer ordered with Anton Bauer mount but user expected AA battery compatibilitySteadi-Newbies
130. 2009Importing film and video production equipment to the UK without an ATA CarnetControverséCases/Carts/Stands and Transport
131. 2009Rental contract disputes when production wants to use equipment for purposes beyond the original package agreementFollow Focus
132. 2009Whether the F900R camera with downconverter board can output NTSC standard video when used in the UK with NTSC-only receiversControverséCameras (Film/Video/HD)
133. 2009Red One camera power management with sealed lead acid batteries and voltage limitationsBatteries/Power
134. 2009Arri HD camera line introduction with built-in recording capabilityCameras (Film/Video/HD)
135. 2009First paid Steadicam commercial shoot with Flyer rig and HVX200 cameraControverséSteadi-Newbies
136. 2009Mounting options for Redbyte DECIMATOR and AJA converters on RED One camerasBrackets/Widgets
137. 2009Video noise on Steadicam Pro II monitor caused by Canatrans interferenceSled
138. 2009SSR-1 NTSC output signal quality issues when used with Genesis in Panalog modeCameras (Film/Video/HD)
139. 2009Power consumption comparison of portable flash-based HD recorders for professional camerasCameras (Film/Video/HD)
140. 2009Transvideo 3A Super Bright monitor viewing angle optimization and bracket maintenanceMonitors
141. 2009Leg numbness and collapse when wearing backmount steadicam vests during extended static shotsControverséVests
142. 2009Building a camera hard mount rig for low-angle filming on ice surfacesVehicles and Mounts
143. 2009HD video wireless transmission systems for on-set video assist and steadicam workVideo Assist and Video Accessories
144. 2009Wireless video assist receiver performance issues in New York City environmentsVideo Assist and Video Accessories
145. 2009Undercutting rates on UK short film productions and its effects on the industryLegal / Business Practices
146. 2009Managing weight limitations on a Flyer LE steadicam with a heavy cameraSteadi-Newbies
147. 2009Troubleshooting balance issues on a second-hand Steadicam Pilot rigSteadi-Newbies
148. 2009Working as Local 600 camera crew member on Las Vegas productions that hire Local 720Legal / Business Practices
149. 2009Estimated number of professional Steadicam operators worldwideGeneral Discussion
150. 2009Battery configuration options for commercial camera stabilizer rigsBatteries/Power
151. 2009Converting VHS demo tape to web-shareable digital formatPicture and History Archives
152. 2009Rain cover options for equipment arms during shootingArms
153. 2009Possibility of using a 3A monitor independently from its electronics boxSled
154. 2009Frame line display freezing on monitors when connected to Arricam LT camera video signalMonitors
155. 2009Rental house refusal to provide clip-on matteboxes with certain lenses and potential damage concernsControverséGeneral Discussion
156. 2009Modulus 5000 HiDef Transmitter functionality and initial testing observationsVideo Assist and Video Accessories
157. 2009Steadicam techniques and equipment choices for a complex opening shot involving stairs and backwards movementGeneral Discussion
158. 2009Repair options for a broken worm drive component in a DBOX 1 camera stabilizerCamera Stage/Donkey Box
159. 2009Learning and initial practical experience with entry-level Steadicam equipmentSteadi-Newbies
160. 2009Methods for displaying full rates and discounts on invoices in QuickBooksLegal / Business Practices
161. 2009Static balance loss after checking drop time on camera stabilizer rigSteadi-Newbies
162. 2009Choosing between vintage Master series and new Movcam Pro Max camera sleds for a beginner operatorSled
163. 2009Aladin wireless follow focus system compared to Preston and other alternativesFollow Focus
164. 2009Dionic battery display not working despite charger indicating readyBatteries/Power
165. 2009Lithium iron phosphate battery technology and feasibility of retrofitting professional battery packsBatteries/Power
166. 2009Safety harness options for shooting from a moving vehicleControverséVehicles and Mounts
167. 2009Archer 2 camera sled capabilities and balancing requirementsSled
168. 2009Evaluating motorized tilt heads and stages for Steadicam rigsControverséSled
169. 2009Learning resources for basic Steadicam operation techniquesSteadi-Newbies
170. 2009Transporting camera sleds during truck moves and between locationsCases/Carts/Stands and Transport
171. 2009Guidelines for lending personal camera equipment to othersGeneral Discussion
172. 2009Compatibility issues between a Hill Garfield vehicle mount and a Matthews MSE 815510 Mitchell plateVehicles and Mounts
173. 2009Steadicam operation on a moving snowmobile for chase scene filmingVehicles and Mounts
174. 2009Sourcing components and techniques for hand-soldering Lemo connectors into custom cablesBrackets/Widgets
175. 2009Learning Steadicam operation with visual impairmentSteadi-Newbies
176. 2009Practical strategies for organizing and transporting Steadicam equipment using cases and cartsCases/Carts/Stands and Transport
177. 2009G-Zoom remote focus and zoom controller for gimbal workFollow Focus
178. 2009Building custom weight plates for steadicam equipmentBrackets/Widgets
179. 2009Equipment for controlling zoom on HD broadcast cameras during live aerial shootsCameras (Film/Video/HD)
180. 2009Remote start/stop control cables for RED ONE and SONY EX3 camerasCameras (Film/Video/HD)
181. 2009Adapting CP battery mount connectors to AB Gold Mount for 12V powerBatteries/Power
182. 2009Follow focus solutions for cameras without mechanical lens teethCameras (Film/Video/HD)
183. 2009Choosing a down-converter for video assistance with compact camera setupsVideo Assist and Video Accessories
184. 2009Archer gimbal tilt axis not returning to level position after drop testGimbal
185. 2009Sony Z1U HD camera output options to SD monitoringCameras (Film/Video/HD)
186. 2009Insurance liability for personal equipment when contracted by Olympic broadcast organizationsControverséLegal / Business Practices
187. 2009Techniques for executing fast 360-degree circular shots with a steadicamOperating
188. 2009Weight distribution and inertia configuration on steadicam rigs for different shooting scenariosControverséOperating
189. 2009Using Tiffen accessory balance weights for Steadicam sled balancingBrackets/Widgets
190. 2009Connecting Sony EX1 video output to Steadicam Pilot LCD monitorSteadi-Newbies
191. 2009Merlin arm and vest setup considerations and comparison with alternative stabilizer systemsSteadi-Newbies
192. 2009Flying Sony EX-3 with cinema adapters and remote control challengesCameras (Film/Video/HD)
193. 2009S.Two OB-1 on-board flash recorder for digital cinema camerasCameras (Film/Video/HD)
194. 2009Follow Focus system experiencing chattering motor behaviorFollow Focus
195. 2009Setting up a Canon 5D Mark II for use on a Flyer camera stabilizer with follow focus and monitoringSteadi-Newbies
196. 200919mm lens support bracket adapter for XCS plates with adjustable positioningBrackets/Widgets
197. 2009Using Canon 5D Mark II on Steadicam rigs for professional video productionCameras (Film/Video/HD)
198. 2009Building a Hackintosh PC to run Mac OS X with better upgrade options and lower cost than official Apple desktopsOff Topic
199. 2009Compatibility of Pin Block components between G70 arm and WK Vest connectorsArms
200. 2009Reducing excessive sensitivity in gimbal pan axis by adjusting sled weight distributionGimbal
201. 2009Steadicam Flyer LE arm adjustment issues and noise concernsArms
202. 2009Dimensions and specifications of Steady Rig instant release top stage for camera stabilization rigsCamera Stage/Donkey Box
203. 2009Post editing and deletion policies on the forumForum Support
204. 2009Preventing accidental rip cord deployment on camera stabilization vestsOperating
205. 2009Using Archos portable recorders for capturing video feeds from camera rigsVideo Assist and Video Accessories
206. 2009Rebuilding a Steadicam Master rig with custom electronics, power management, and integrated recording capabilitySled
207. 2009Operating a Steadicam rig on a boat in strong wind conditionsOperating
208. 2009Balancing a lightweight camera on a Steadicam Flyer using weight plates and adjustmentsSteadi-Newbies
209. 2009BOA-LOK clamping system for wireless follow focus receiver mountingFollow Focus
210. 2009Best practices for operator portfolio websites and video hostingGeneral Discussion
211. 2009Gimbal stabilizer settings for Canon HV30 camera on Merlin stabilizerSteadi-Newbies
212. 2009Varricam 3700 camera setup and operational considerations for steadicam workCameras (Film/Video/HD)
213. 2009Powering battery chargers remotely using ATV or snowmobile batteriesBatteries/Power
214. 2009Choosing a starter steadicam rig: Flyer LE as an entry-level option for career developmentSteadi-Newbies
215. 2009RF interference from wireless video transmitters affecting HD camera recordingsVideo Assist and Video Accessories
216. 2009HD SDI signal dropout issues on UltraBrite 2 monitors during initial connectionMonitors
217. 2009Flying a Viper camera on a crane or remote rigCameras (Film/Video/HD)
218. 2009Canon 5D and Red cameras as production tools for music video and film work in 2009Cameras (Film/Video/HD)
219. 2009Storage and reusability of focus marking rings for BFD follow focus systemsFollow Focus
220. 2009BFD follow focus motor intermittent connection issues and troubleshootingFollow Focus
221. 2009Lithium iron phosphate cells as a replacement option for battery packsBatteries/Power
222. 2009Budget wireless video transmission systems for steadicam use and their frequency considerationsVideo Assist and Video Accessories
223. 2009Military and government use of Steadicam equipment for various applicationsSteadi-Newbies
224. 2009Flexible HD cables for camera support systemsVideo Assist and Video Accessories
225. 2009Gimbal balance problem where rig loses balance when rotated despite correct static balance setupSteadi-Newbies
226. 2009Desired features and capabilities for remote follow focus systemsFollow Focus
227. 2009Finding servicing options for Ultra and Master arms in the UKArms
228. 2009Preston MDR 2 to RED camera cable pinout specificationsFollow Focus
229. 2009Steadicam operator rates and industry standards in Spain's television production marketLegal / Business Practices
230. 2009Portable mini DVR recorders for video recording: features, specifications, and model comparisonsVideo Assist and Video Accessories
231. 2009Sunshade compatibility and availability for TB-6 monitorMonitors
232. 2009Service accessibility and repair turnaround times for follow focus systemsSteadi-Newbies
233. 2009Local service availability and repair turnaround times for cinema equipmentJournals
234. 2009Video cable connections for RED One cameraGeneral Discussion
235. 2009Post-production stabilization of camera movement errors and unwanted motionSteadi-Newbies
236. 2009Practical considerations for relocating as an expat worker to another countryLegal / Business Practices
237. 2009Safety considerations for steadicam operators stepping on and off cranesControverséGeneral Discussion
238. 2009Battery LCD display showing single bar caused by backfeeding between multiple batteries on power sledsControverséBatteries/Power
239. 2009RED camera video signal loss on Steadicam Ultra2 sledGeneral Discussion
240. 2009Upgrading monitors on a Steadicam Pilot rig with considerations for weight, brightness, and levelingSteadi-Newbies
241. 2009Vibration and shock transfer problems when using telephoto lenses on Steadicam systemsOperating
242. 2009Cinematography techniques and equipment configuration for a feature film shot with Canon 5D Mark II in KenyaJournals
243. 2009HD-SDI sled design with improved power distribution and video routing capabilitiesGeneral Discussion
244. 2009Powering Preston follow focus receivers from camera D-tap connections on Sony F900 camerasControverséFollow Focus
245. 2009Achieving dynamic balance on a Steadicam rig with a lightweight monitorSteadi-Newbies
246. 2009Equipment and battery options for a Steadicam Pilot rigControverséSteadi-Newbies
247. 2009Compatibility of digital follow focus motors with Preston systems and alternatives to Preston motorsFollow Focus
248. 2009Achieving dynamic balance on a Steadicam Pilot with a Panasonic HMC151 camera when the standard 3/4" guideline does not applySteadi-Newbies
249. 2009Battery storage and charging practices for professional camera batteriesBatteries/Power
250. 2009Technical details of the opening crane shot in The Player (1991)ControverséOperating
251. 2009Hocus Focus wireless follow focus system design and capabilitiesFollow Focus
252. 2009Frame delay when using wireless video transmission with Sony F900 camera and external modulus receiverVideo Assist and Video Accessories
253. 2009Single-take music video production with moving camera and rotating crewOperating
254. 2009Preventing corrosion on Steadicam Master arm in humid tropical climatesArms
255. 2009Compatibility and technical differences between IDX E-HL9S and PowerCube batteriesBatteries/Power
256. 2009Effectiveness of steadicam arms in isolating operator movementArms
257. 2009Dynamic balancing procedure for the Steadicam PilotControverséSteadi-Newbies
258. 2009Operating technique for point-of-view shots from a child's height using camera stabilization equipmentControverséOperating
259. 2009Cleaning and disassembling the Flyer Gimbal bearing assemblyGimbal
260. 2009PRO 2 landing pad and weight plate system for camera stabilizersBrackets/Widgets
261. 2009Motion blur photography techniques on film and video setsPicture and History Archives
262. 2009Selecting a starter steadicam rig on a limited budget with weight and camera compatibility considerationsSteadi-Newbies
263. 2009Loose adjustment knob for on-screen menu selection on Sled equipmentSled
264. 2009Managing a lower back strain while operating steadicam on a scheduled shootOperating
265. 2009Vehicle-mounted stabilizer arm attachment using bridge assembly modification with pipe clampVehicles and Mounts
266. 2009Gimbal balance issues on stabilizer rig resolved by repairing post-to-stage connectionSled
267. 2009Operating Sony F900 and RED ONE cameras on Flyer LE Steadicam rig for film featuresControverséOperating
268. 2009Purchasing strategy for starting Steadicam operators: new versus used equipmentSteadi-Newbies
269. 2009Achieving dynamic balance on a camera support sled with lightweight camera bodiesCameras (Film/Video/HD)
270. 2009Blackmagic downconverter software upgrade for HD SDI to standard definition conversionVideo Assist and Video Accessories
271. 2009Practical experience using long focal length lenses with Steadicam equipmentControverséOperating
272. 2009Using perspective correction lenses on video cameras for architectural and full-length subject framingControverséCameras (Film/Video/HD)
273. 2009Modifications and upgrades for Steadicam Flyer rigs to improve functionality and performanceSteadi-Newbies
274. 2009Camera gimbal losing static balance after rotating 180 degrees during dynamic movementSteadi-Newbies
275. 2009Power connector options for Redbyte video converterVideo Assist and Video Accessories
276. 2009V2 gimbal axis alignment stability and long-term reliability concernsControverséGimbal
277. 2009Retrofitting locating pins to older Preston focus handsetsFollow Focus
278. 2009Composite video output configuration on Sony EX1 cameraCameras (Film/Video/HD)
279. 2009Operating techniques used in a six-minute continuous camera movement for a commercial advertisementOperating
280. 2009Extending horizontal arm range on G-70 by removing restriction block and reversing kick-back linkArms
281. 2009Dionic HC battery compatibility and performance with Steadicam rigs and wireless camera setupsBatteries/Power
282. 2009Shipping and transporting Steadicam gear internationally, particularly to the Dominican RepublicCases/Carts/Stands and Transport
283. 2009Quality assessment of Indian-made camera stabilizer vest copiesVests
284. 2009Mounting the Panasonic HPG20 recorder on a camera rigBrackets/Widgets
285. 2009Camera techniques used for moving shots in Star Trek (2009) film productionOperating
286. 2009Practical considerations for a first international steadicam job at a fashion showSteadi-Newbies
287. 2009Archos recorder dock connector options for video input and output on Steadicam sledsVideo Assist and Video Accessories
288. 2009Homemade LED tilt sensor using accelerometer for camera levelingOff Topic
289. 2009Assessing replacement value and understanding insurance coverage types for film equipmentLegal / Business Practices
290. 2009Wireless video transmitter and receiver options for camera equipmentVideo Assist and Video Accessories
291. 2009Archer camera post diameter for docking ring compatibilitySled
292. 2009Intermittent signal loss and display overexposure issues on a professional monitor responsive to physical contact and movementMonitors
293. 2009Creaking noises from a Pilot stabilizer arm and troubleshooting approachesSteadi-Newbies
294. 2009Understanding iso-elastic arm behavior on Steadicam Pilot rigsControverséArms
295. 2009Sony EX series cameras produce image jitter when mounted on Steadicam rigs due to insufficient contact between camera base and mounting plateCameras (Film/Video/HD)
296. 2009Using Panavision anamorphic lenses on digital cinema camerasCameras (Film/Video/HD)
297. 2009Falling incidents while operating Steadicam and prevention strategiesOperating
298. 2009Repair options for a broken mounting plate on an IIIA sled after a tumbleSled
299. 2009Troubleshooting noise and failure modes in Heden M28VP follow focus motorsFollow Focus
300. 2009Monitor specifications and field performance for steadicam work as of 2009 NAB showMonitors