What operators found

• Cooke anamorphic lenses normally require counterweight mounted at the rear of the camera.2019 Facebook
• Entry-level steadicams require significant practice time and skill development before delivering quality results2019 Steadi-NewbiesDisputed
• A C stand can be used for static balancing of a Steadicam by mounting the gimbal handle to the stand's end2019 Steadi-Newbies
• A compact lipstick camera can be mounted to a film camera's viewfinder as a framing reference solution, with its video feed visible on an external monitor.2019 Steadi-Newbies
• Achieving both static and dynamic balance can be challenging when battery weight needed for static balance conflicts with monitor weight requirements for dynamic balance.2019 Steadi-Newbies
• A commercial fabric rain shield from a major photography retailer can provide basic rain protection for camera gimbal equipment2019 Wave/Volt

Still argued about

1. 2019Evaluating budget entry-level steadicam options under 700 euros for learning and small production workSteadi-Newbies
2. 2019Selecting a stabilizing camera rig within a 15,000 dollar budget for Alexa Mini and RED camera workSteadi-Newbies
3. 2019Side-to-side drift during forward walking with stabilizer and light cameraSteadi-Newbies

Often in the same threads

Zephyr18, Top Stage10, Volt9, Master Series6, Arm Post5, Artemis4, Low Mode4, Follow Focus3, xARM3, CineLive2, Dovetail Plate2, G-702

All threads

1. 2019Balancing an ARRI Artemis Trinity with ALEXA Mini and Cooke 65 mm Macro anamorphic lens using two focus motors.FacebookArri Artemis Trinity
2. 2019Evaluating budget entry-level steadicam options under 700 euros for learning and small production workDisputedSteadi-Newbies
3. 2019Using a C stand for Steadicam balancing as an alternative to purpose-made bracketsSteadi-Newbies
4. 2019Framing solutions for film cameras without built-in monitors when used on camera stabilizersSteadi-Newbies
5. 2019Balancing a gimbal rig for both static and dynamic stability with heavy cameras and uneven weight distributionSteadi-Newbies
6. 2019Rain protection methods and covers for Volt gimbal systemsWave/Volt
7. 2019How to insure second-hand aerial filming equipment for proper replacement coverageGeneral Discussion
8. 2019Recovery and work capability after total knee replacement in a physically demanding professionGeneral Discussion
9. 2019Remote control options for 360-degree camera roll on stabilizer systemsGeneral Discussion
10. 2019Comparison of Tiffen Volt and Arri Trinity stabilization systems for Steadicam operatorsWave/Volt
11. 2019Volt control box gimbal floating and losing position registration intermittentlyWave/Volt
12. 2019Service providers and upgrades for Steadicam Master sled equipmentGeneral Discussion
13. 2019Mounting a monitor on gimbal handle instead of standard sled placementSteadi-Newbies
14. 2019Stabilizing camera operation on sandy beachesOperating
15. 2019Learning gearhead and wheel camera control techniques through practice optionsSteadi-Newbies
16. 2019Equipment recommendations for learning steadicam on a limited budget as a beginnerSteadi-Newbies
17. 2019Differences between Tiffen M1 and M2 camera sleds regarding construction, components, and specificationsGeneral Discussion
18. 2019Differences between Wave stabilizer versions and comparisons with alternative gimbal designsWave/Volt
19. 2019Selecting a stabilizing camera rig within a 15,000 dollar budget for Alexa Mini and RED camera workDisputedSteadi-Newbies
20. 2019Sony FS5 SDI signal intermittently cutting out on V-LCD70XHB monitor when connected to Zephyr steadicamSteadi-Newbies
21. 2019DM2 motor compatibility with Bartech digital focus systemFollow Focus
22. 2019Career strategy for pursuing both cinematography and camera operating, including SteadicamSteadi-Newbies
23. 2019Using electronic gimbals with vest and arm rigs instead of handheld operationGeneral Discussion
24. 2019Balancing a gimbal that tilts severely when rotated after servicingGimbal
25. 2019Long-term storage conditions for lithium-ion batteriesBatteries/Power
26. 2019Gimbal slot depth measurements for Tiffen and GPI Pro gimbalsGimbal
27. 2019Hearing protection options for people with narrow ear canals and noise sensitivityGeneral Discussion
28. 2019Configuration of canisters on a Titan arm with fewer than four unitsArms
29. 2019Experience with Inovativ Scout and Voyager carts for equipment transportCases/Carts/Stands and Transport
30. 2019Payment reliability and risk management when working on political campaign productionsGeneral Discussion
31. 2019Cracked flying vest assessment and repair optionsVests
32. 2019Operating a Sony Venice camera on a Zephyr stabilizer rigSteadi-Newbies
33. 2019Suitability of small Steadicam rigs like the Aero-15 for run-and-gun solo work versus dedicated camera support systemsSteadi-Newbies
34. 2019Using a larger steadicam arm to exceed weight capacity of a Zephyr rigGeneral Discussion
35. 2019Adapting camera plates for the DXL2 camera on Master Series stabilizer sledsSled
36. 2019Steadicam operating technique fundamentals for beginnersSteadi-Newbies
37. 2019Side-to-side drift during forward walking with stabilizer and light cameraDisputedSteadi-Newbies
38. 2019Career viability and practical considerations of starting with a Zephyr steadicam rigSteadi-Newbies
39. 2019Steadiproline Raven stabilizer system performance and suitability for operatorsSteadi-Newbies
40. 2019Fitting an M1 gimbal into a Pelican 1650 caseCases/Carts/Stands and Transport
41. 2019Choosing between Steadicam monitors with and without built-in digital levels, comparing Transvideo, SmallHD, and Boland optionsMonitors
42. 2019Vibration issues with a topstage camera support system when used in low mode with lightweight camerasGeneral Discussion
43. 2019Twitching or chattering motion observed during locked-off shots with Volt motion control systemGeneral Discussion
44. 2019Upgrading from a lightweight stabilizer rig to a larger payload-capable systemSteadi-Newbies
45. 2019Adjustment knobs on ZEPHYR arm are difficult to turnSteadi-Newbies
46. 2019Mounting options for ARRI Mini EVF positioning on camera handleGeneral Discussion
47. 2019Encoder ring detachment from Wave/Volt gimbal assemblyWave/Volt
48. 2019Achieving dynamic balance on camera stabilizer rigsSteadi-Newbies
49. 2019Insurance options for independent production equipmentGeneral Discussion
50. 2019Steadicam MSC-200590 monitor control buttons not responding over HDMI inputMonitors
51. 2019Steadicam operators on True Detective productionGreat Steadicam Shots
52. 2019Comparison of green screen monitors versus LCD displays for professional useMonitors
53. 2019Tiffen M2 steadicam sled specifications and featuresGeneral Discussion
54. 2019Selecting a camera support arm compatible with Trinity stabilizerGeneral Discussion
55. 2019Import duties and taxes when purchasing optical equipment from the UK to the United StatesGeneral Discussion
56. 2019Whether to leave camera equipment unattended overnight between shoot daysSteadi-Newbies
57. 2019SmartSystem Matrix R2 sled and SmartSystem arm quality assessmentDisputedSled
58. 2019Bright daylight-visible monitors suitable for mounting on Archer 2 camera rigGeneral Discussion
59. 2019Compatible monitor yokes for Pro telescoping monitor armsBrackets/Widgets
60. 2019Tuning gimbal parameters when using a lighter camera than the original design specificationGimbal