SteadiHub
Sign InSign Up

Still argued about

959 threads in the archive

No agreementThese threads ended with operators on different sides. The entries show the positions instead of an answer.

Often in the same threads

Zephyr79, Top Stage70, Low Mode68, Volt67, Artemis47, Master Series34, MDR32, Gimbal Bearing28, Follow Focus82, G-7029, Modulus32, BFD27

All threads

  1. 2026Trinity vs. 360-degree roll head: practical job prospects and system flexibility for operator investment decisions.FacebookSteadicam operators group
  2. 2026Ownership and rental of intercom headsets: business case and operational impact on Steadicam® work.FacebookSteadicam operators group
  3. 2026Rust on black-oxide screws after one week of coastal shooting on a Tiffen M2: material specification versus maintenance protocol.FacebookThe Steadicam Group
  4. 2026Rigging a RED Komodo 6K on a CAME-TV Steadicam® sled for improved inertia and operator technique.FacebookSteadicam operators group
  5. 2026Operating a Steadicam® Zephyr without Volt: drop time, horizon control, and the effect of upper-rig weight distribution on balance.FacebookSteadicam operators group
  6. 2026Entry-level stabilizer strategy on a 15,000 USD budget: Rever EVO versus used Artemis 2 or M2 plus Volt, in a market with limited secondhand availability.FacebookThe Steadicam Group
  7. 2026Choosing between upgrading an older ProVid-2 kit or investing in a professional rig: workshop-first versus equipment-first approach for beginners.FacebookSteadicam operators group
  8. 2026First stabilizer purchase: Steadicam® Elite (14 kg payload, integrated Volt 3) versus Rever Evo (higher payload) and used-market strategy.FacebookThe Steadicam Group
  9. 2026Discontinuation of Steadicam® Aero 30 and Axis entry-level rigs, availability of service and spare parts for discontinued models, and purchasing strategy alternatives.FacebookThe Steadicam Group
  10. 2026Rate structures for Steadicam® operating in live television production versus scripted and commercial work.FacebookThe Steadicam Group
  11. 2026Upgrading cheap arm springs for Sony FX3 and repairing stripped threads with threaded inserts (Heli-Coil).FacebookSteadicam operators group
  12. 2026Mounting a G70x arm on the rear socket block of a Walter Klassen vest (transition from Exovest, regular operator setup)FacebookThe Steadicam Group
  13. 2026Power distribution failure of D-Tap step-down splitters on a Venice 2 rig, and proper AKS accessory power supply methods.FacebookSteadicam operators group
  14. 2026Power loss on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.FacebookArri Artemis Trinity
  15. 2026Voltage display discrepancies between camera and RCP on ARRI Artemis Trinity 2: 24 V rail showing 23.4 V at RCP versus 28 V at camera.FacebookArri Artemis Trinity
  16. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.FacebookSteadicam operators group
  17. 2026Choosing long-term battery investment for Steadicam® sleds: Anton Bauer, Core SWX, IDX, Indipro, and custom cell builds.FacebookThe Steadicam Group
  18. 2026Why a 150 Wh battery at the sled powers the camera for only ~20 minutes versus two to three times longer when mounted on-body, and how to extend runtime.FacebookThe Steadicam Group
  19. 2026MK-V Level horizon stabilizer: specifications, plate compatibility, price, and comparison to Wave.FacebookThe Steadicam Group
  20. 2026Tightening a loose quick-release lever on the Top Stage dovetail plate, and preventing camera slip during shoulder operation.FacebookThe Steadicam Group
  21. 2026Finding a bright (1500–2000 nits) low-mode monitor with recording and SDI I/O to replace a defective Transvideo Starlite.FacebookSteadicam operators group
  22. 2026Monitor brightness and heat performance in direct sunlight: SmallHD 703 UB versus alternatives.FacebookThe Steadicam Group
  23. 2026Low-mode monitor selection for Volt Brain rig: latency performance of Transvideo Starlite versus current alternatives.FacebookThe Steadicam Group
  24. 2026Adjusting play in a Steadicam® Master Series gimbal yoke and balancing it for smooth 180-degree pan without tipping.FacebookSteadicam operators group
  25. 2026Preventing socket block fracture on GPI-PRO arms during hardmount on rough terrain: rod end durability and assembly technique.FacebookThe Steadicam Group
  26. 2026Buying strategy for a 25,000 USD entry-level rig: used Artemis-1 with Flowcine X-Arm versus Rever-Evo Sled, and the case for learning on budget equipment firstFacebookThe Steadicam Group
  27. 2026Rocket Arm (elastic band arm) versus traditional spring arms like the G70x: performance, weight, build, and design dispute.FacebookThe Steadicam Group
  28. 2026Gimbal bearing lubrication: oil quantity, product selection, and the performance versus protection trade-off.FacebookThe Steadicam Group
  29. 2026Pan-bearing friction and image oscillation in Tiffen gimbals with Volt power cable: root cause and acceptance criteria.FacebookThe Steadicam Group
  30. 2026Choosing between Wave, Volt 2, and MK-V Level gimbals: performance in wind, rig weight, maintenance, and mode switching.FacebookSteadicam operators group
  31. 2026Upgrading an M1 Volt gimbal from 1.5-inch to 1.75-inch center rod: insert replacement procedure and encoder ring considerations.FacebookSteadicam operators group
  32. 2026Removing a PRO gimbal from a VZ grip for conversion to a Volt-modified gimbal.FacebookSteadicam operators group
  33. 2026EFP gimbal grip binding on the center rod: causes, cleaning, and repair versus replacement options.FacebookSteadicam operators group
  34. 2026Lubricating gimbal bearings after cleaning when Tri-Flow PTFE is unavailable for months.FacebookSteadicam operators group
  35. 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rod mounts and CamJam mounts to minimize vibrationsSteadiHub
  36. 2026Choosing a vest: the one purchase that cannot be made from specificationsOperator practice
  37. 2026Choosing and troubleshooting the monitor on a stabilizer rigOperator practice
  38. 2026Volt generations, and whether the system is necessary at allOperator practice
  39. 2026Developing camera operating skills from competent to excellent through intentional practice and philosophical approachGeneral Discussion
  40. 2025Maximum camera payload on Steadicam® Axis: ALEXA Mini LF with Signature Primes and power limitations.FacebookThe Steadicam Group
Show more
Ask about Still argued aboutThe answer cites the archive