What operators found

• Long setups require upper support: SSB-4 (Stabilizer Systems Bracket 4, K2.0044225) plus Top Attachment Bracket TAB-1 (K2.0041117), and correct adjustment of the lower clamp per manufacturer guidance.2023 FacebookDisputed
• One operator achieved balance using heavier batteries positioned low and the post fully extended, replacing the SAM-7 plate with a CBP-5 and 19 mm rods to accommodate the lens length.2023 FacebookDisputed
• Many professional operators maintain a philosophy of carrying backups for every critical component; cables warrant three spares minimum.2023 Facebook
• Camera plates and cables must match the planned cameras: SAM-2, SAM-4, and SAM-6 plates are available; power cables include 12/24 V XLR, 24 V Mini-Power, and RED connectors.2023 FacebookDisputed
• The EXT-IN port on the Trinity 2 head base requires a 24 V power source to supply the head and accessories mounted above it.2023 Facebook
• The ARRI CSS clamping bridge 19 mm (Bridge 52) mounted to the sled rods with a 1/4-inch threaded hole drilled centrally allows quick swapping of a transmitter via quick-release plate between sled and tripod positions.2023 Facebook

Still argued about

1. 2023Reducing vibrations on ARRI Trinity with long camera setup during horizontal post and tilted head at 45 degrees.FacebookArri Artemis Trinity
2. 2023Balancing an ARRI ALEXA 35 with a Cooke Varotal 18–100 mm T3 zoom on Steadicam®, including low-mode operation and weight reduction.FacebookThe Steadicam Group
3. 2023Initial equipment specification for ARRI Trinity 2: camera plates, power cables, and battery selection.FacebookArri Artemis Trinity

Often in the same threads

Top Stage15, Volt15, Artemis10, ALEXA 359, Zephyr9, Trinity 18, Low Mode7, Trinity 27, Gimbal Bearing4, G-703, G-70X3, Monitor Bracket3

All threads

1. 2023Reducing vibrations on ARRI Trinity with long camera setup during horizontal post and tilted head at 45 degrees.DisputedFacebookArri Artemis Trinity
2. 2023Balancing an ARRI ALEXA 35 with a Cooke Varotal 18–100 mm T3 zoom on Steadicam®, including low-mode operation and weight reduction.DisputedFacebookThe Steadicam Group
3. 2023Backup and spare equipment for Steadicam® operators: priority list and budget considerationsFacebookSteadicam operators group
4. 2023Initial equipment specification for ARRI Trinity 2: camera plates, power cables, and battery selection.DisputedFacebookArri Artemis Trinity
5. 2023EXT-IN port on ARRI Trinity 2 head base: power distribution to head, accessories, and cameraFacebookArri Artemis Trinity
6. 2023Mounting a Teradek wireless transmitter on an ARRI Artemis Trinity sled without cable tiesFacebookArri Artemis Trinity
7. 2023Steadicam® rig transport through airport security screening and X-ray inspection procedures.FacebookSteadicam operators group
8. 2023Shipping and transporting V-Lock batteries within the EU by courier and air freight.FacebookSteadicam operators group
9. 2023Importing Steadicam® equipment through Cairo Airport: customs procedures and insurance considerationsFacebookSteadicam operators group
10. 2023Building a transport cart from a Pelican case to protect Steadicam® and ARRI Trinity rigs during airline travelFacebookThe Steadicam Group
11. 2023Flying the ARRI Trinity in X-Mode (Omega-style, camera lateral to body) for table-top passes using tilt control via post rotation.DisputedFacebookArri Artemis Trinity
12. 2023ARRI Trinity pendulum: function, weight configuration, and operation without it in low mode.FacebookArri Artemis Trinity
13. 2023Low-frequency vibration with extended Superpost in horizontal position on ARRI Trinity; Post-Extender remedyFacebookArri Artemis Trinity
14. 2023Securing monitor and master grip to Trinity sled via 19 mm clamps in low mode: slippage during fast moves.DisputedFacebookArri Artemis Trinity
15. 2023Low-mode monitor mounting solutions on a Volt Sled with M2-Top-StageFacebookSteadicam operators group
16. 2023ARRI Trinity in X-mode (Omega configuration): hardware and software setup, monitor position, balance, tilt-lock, pendulum, and mode switchingFacebookArri Artemis Trinity
17. 2023Maintaining classical leveling technique while using electronic stabilizer heads (Volt, Wave, Cyclo); learning strategy to master both manual and assisted operation.DisputedFacebookSteadicam operators group
18. 2023Detecting fraudulent used-equipment listings: copied photos and text in a Trinity 1 sale.FacebookSteadicam operators group
19. 2023Evaluating a Laing Master rig for payloads up to 50 lbs: setup, technique, and why brand rigs are recommended.FacebookSteadicam operators group
20. 2023Budget rig (Flycam Vista II with Zest Pro sled) as a practice platform before a Steadicam® workshop: learning transfer and durability concernsDisputedFacebookSteadicam operators group
21. 2023Buying a 1994 Steadicam® Master Series complete rig for approximately 10,000 GBP as a first rig, and retrofitting it with Volt electronics.DisputedFacebookThe Steadicam Group
22. 2023Viability of used entry-level Glidecam V8 and Smooth Shooter arm systems for a RED Komodo with cinema lens at approximately 7 kg total weight.FacebookThe Steadicam Group
23. 2023Mounting non-ARRI cameras (e.g. RED Komodo) on an ARRI Trinity at optical center using stacked riser-plates.DisputedFacebookArri Artemis Trinity
24. 2023Camera compatibility with ARRI Trinity 2: mounting options and weight limits.FacebookArri Artemis Trinity
25. 2023Reducing build weight for an ARRI ALEXA Mini LF on Steadicam®: SAM plate, wireless focus control, eliminator plate, and motor placement.FacebookSteadicam operators group
26. 2023Balancing and shortening a Steadicam® rig with a heavy zoom lens (14–15 lbs).FacebookThe Steadicam Group
27. 2023Reducing weight of Sony Venice 2 rental power plate for Steadicam® work while maintaining accessory power distribution.FacebookThe Steadicam Group
28. 2023Powering an ARRI ALEXA 35 on a Tiffen M1 rig with 24 V: dedicated cable versus battery eliminator trade-offs.DisputedFacebookThe Steadicam Group
29. 2023Minimizing ARRI ALEXA Mini LF total weight for Steadicam® operation by removing or relocating non-essential components.DisputedFacebookThe Steadicam Group
30. 2023Mounting Preston MDR4 focus motor and Light Ranger iris control on an ALEXA 35 on the ARRI TrinityFacebookArri Artemis Trinity
31. 2023Identifying compatibility and voltage configuration of sled camera cables for ARRI ALEXA Mini, Mini LF, and ALEXA 35.FacebookSteadicam operators group
32. 2023Camera plates required for Steadicam® Ultra 1 with ARRI ALEXA Mini, Mini LF, and ALEXA 35FacebookSteadicam operators group
33. 2023ALEXA 35 power cable compatibility with ALEXA Mini/Mini LF cables and sled-mounted battery supplies.DisputedFacebookThe Steadicam Group
34. 2023Mounting a Steadicam® rig with large, heavy lenses: long camera plate configuration and lens support setup.FacebookSteadicam operators group
35. 2023Mounting an ARRI ALEXA 35 with Zeiss Super Speed lenses on Steadicam® with minimal height: mattebox options and rod support alternatives.DisputedFacebookThe Steadicam Group
36. 2023ARRI Trinity: profile settings for soft tilt stops beyond PID tuningFacebookArri Artemis Trinity
37. 2023ARRI Trinity 2: handling preference between Yoke and MasterGrip for non-tilt shots, and monitor holder edge interferenceDisputedFacebookArri Artemis Trinity
38. 2023Remote control setup for ARRI Trinity: OCU-1 and MasterGrip wheel versus standard hand wheels for tilt and roll precision.DisputedFacebookArri Artemis Trinity
39. 2023Play in the gimbal head of a Tiffen M2 with Volt body: causes and tightening procedureDisputedFacebookSteadicam operators group
40. 2023Market saturation for Steadicam® operators: regional variations, direct-to-rig entry, and the role of stabilizer gimbals versus traditional skills.DisputedFacebookThe Steadicam Group