Ce que les opérateurs ont constaté

• The Zephyr sled can typically lift 20-25 pounds depending on the arm used2010 Steadi-Newbies
• A remote follow focus system is considered essential equipment that operators should own rather than rent, as it becomes expected on professional shoots.2010 Follow Focus
• A consumer television's coaxial tuner input accepts only broadcast signals such as ATSC, not HD-SDI video from professional cameras2010 Monitors
• Minor play in the bearing housing where the yoke connects to the gimbal can be normal and may disappear once the rig is loaded with a camera payload.2010 Gimbal
• Portrait-oriented video has been successfully used in advertising and fashion work, offering a different perspective from standard landscape formats.2010 General Discussion
• The Pilot has a low payload capacity and becomes limiting quickly when accessories like wireless audio, matte boxes, or focus pullers are added to prosumer cameras.2010 Steadi-Newbies

Toujours débattu

1. 2010Whether to purchase a personal headset for live event work or rely on production-supplied equipmentGeneral Discussion
2. 2010International shipping methods for equipment repair: cost versus reliability tradeoffsGeneral Discussion
3. 2010Practical considerations and challenges when operating an AR sled systemSled

Souvent dans les mêmes discussions

Follow Focus60, Low Mode34, BFD25, Dovetail Plate20, Master Series18, Zephyr18, Top Stage17, Base Plate16, G-7014, MDR13, Arm Post10, HU310

Toutes les discussions

1. 2010Choosing between Zephyr and EFP Steadicam sleds for a beginner operator focusing on video and TV workSteadi-Newbies
2. 2010Essential equipment to purchase versus rent when starting a Steadicam operator careerFollow Focus
3. 2010Connecting HD-SDI camera output to a consumer television for monitoringMonitors
4. 2010Bearing play in Steadicam Flyer LE gimbal yoke attachmentGimbal
5. 2010Mounting cameras in portrait orientation on steadicam rigsGeneral Discussion
6. 2010Choosing an entry-level stabilizer rig for wedding videography on a tight budgetSteadi-Newbies
7. 2010Invoicing software recommendations for Mac users with rental inventory and mobile capabilitiesLegal / Business Practices
8. 2010Availability and practicality of low-mode mounting options for the ARRI 435 cameraBrackets/Widgets
9. 2010Operating 3D steadicam rigs with beamsplitter configurations3D Steadicam
10. 2010PRO GPI Gen III battery module features and design improvementsSled
11. 2010Low-mode brackets and camera setup alternatives for the Alexa cinema cameraBrackets/Widgets
12. 2010Traction devices for icy terrain and their safety considerations during camera workGeneral Discussion
13. 2010Adding weight to a Steadicam Flyer LE sled to accommodate lighter camerasSled
14. 2010Whether to purchase a personal headset for live event work or rely on production-supplied equipmentControverséGeneral Discussion
15. 2010Lubricant choice for camera arm springs and jointsGeneral Discussion
16. 2010Archer 1 sled structural issues and modificationsSled
17. 2010International shipping methods for equipment repair: cost versus reliability tradeoffsControverséGeneral Discussion
18. 2010GlobalMediaPro Li160A battery performance and power draw limitations in professional video equipmentBatteries/Power
19. 2010Emergency release cord on Steadicam vestsVests
20. 2010Finding and using through-the-lens teleprompters for steadicam workGeneral Discussion
21. 2010Trends in camera stabilization rig size as lighter professional cameras become viableGeneral Discussion
22. 2010Practical considerations and challenges when operating an AR sled systemControverséSled
23. 2010Steadicam Merlin package contents and weight support requirementsSteadi-Newbies
24. 2010Heden M26VE motor performance in cold weather conditionsGeneral Discussion
25. 2010Teradek Cube wireless HD encoder/decoder system performance and features for on-set monitoringGeneral Discussion
26. 2010Back pain and physical strain from operating camera equipmentOperating
27. 2010Comparison of HD wireless video transmitter systems for professional camera workControverséVideo Assist and Video Accessories
28. 2010Video signal corruption on Arri 3 high-speed setup resolved through separate power configurationBatteries/Power
29. 2010Executing smooth whip pans with camera cranes while managing dynamic balance and headroom adjustmentsOperating
30. 2010Hardmount adapter options for Merlin and Pilot camera armsArms
31. 2010Identifying fraudulent equipment auctions on eBay through seller behavior and listing red flagsGeneral Discussion
32. 2010Physical training recommendations for new steadicam operatorsSteadi-Newbies
33. 2010Connecting Canon 5D HDMI output to external monitors for video productionCameras (Film/Video/HD)
34. 2010Sourcing tally lights and fiber-optic jumpers for Steadicam camera operationSteadi-Newbies
35. 2010Mounting a Transvideo 6-inch HD monitor on a Clipper steadicam with the standard yokeMonitors
36. 2010Manufacturing process and specifications of a follow focus motor systemFollow Focus
37. 2010Stepping down battery voltage for powering camera accessories and devicesSteadi-Newbies
38. 2010Voltage system design for camera stabilization rigs: choosing between 12V only, 24V only, or switchable 12V/24V configurationsSled
39. 2010Methods to achieve lower camera positioning on a Master Series sled rigSled
40. 2010Powering Genesis camera with older Pro I steadicam rig and chocolate bar batteriesBatteries/Power
41. 2010Equipment progression strategy for steadicam operators starting with lightweight rigsSteadi-Newbies
42. 2010Wiring conversion from Anton Bauer to V-lock battery plate connectorsBatteries/Power
43. 2010Selecting an appropriate steadicam rig for broadcast work with a Sony PMW 350K cameraSteadi-Newbies
44. 2010Comparison of V-mount batteries for Steadicam work regarding weight, capacity, and costBatteries/Power
45. 2010Selecting an appropriate lightweight Steadicam model for property videography workControverséSteadi-Newbies
46. 2010Compatibility of Scout arm with Pilot sled and feasibility of upgrading payload capacityArms
47. 2010Live steadicam shot transitioning between two television shows with mounted camera support equipmentGeneral Discussion
48. 2010Compatibility of Tango stabilizer with Zephyr arm versus heavier G40 armSteadi-Newbies
49. 2010Joystick-based zoom and focus control systems for cinema camera lensesFollow Focus
50. 2010Achieving very low camera heights with a Steadicam rig on tall operatorsOperating
51. 2010Monitor positioning on camera sleds and its effects on dynamic balance and usabilityOperating
52. 2010EFP base connector purpose and potential repurposingSled
53. 2010Career transition to steadicam operation starting at mid-career ageSteadi-Newbies
54. 2010Video playback smoothness issues with Canon 5D Mark II progressive mode recordingGeneral Discussion
55. 2010Custom dovetail adapter plate for Alexa camera body to enable Steadicam mountingBrackets/Widgets
56. 2010Steadicam operating techniques and workflow for a music video shot with Canon 5DJournals
57. 2010Truck-mounted camera stabilization using Steadicam-type arm with gimbal and gyrosSled
58. 2010Techniques for opening Pelican cases without hand injuryCases/Carts/Stands and Transport
59. 2010Availability and reliability of VFX focus/iris controller systemsGeneral Discussion
60. 2010Alexa camera eyepiece diopter adjustment looseness causing focus problemsCameras (Film/Video/HD)
61. 2010Function of Steadicam arm and vest systems beyond weight supportArms
62. 2010Procedures for traveling to Brazil with camera equipment from abroadControverséLegal / Business Practices
63. 2010Workshop training on Steadicam operating techniques and equipmentJournals
64. 2010Weight and operational challenges of stereoscopic 3D steadicam rigs using dual F-series camerasGeneral Discussion
65. 2010RedRockMicro wireless follow focus system hands-on demonstration and specificationsControverséFollow Focus
66. 2010Storing broadcast camera equipment in an unheated garage during cold wintersGeneral Discussion
67. 2010Footwear and mobility solutions for operating a Steadicam on ice during curling eventsGeneral Discussion
68. 2010Investment decision: comparing Steadicam rig purchase vs camera package for early-career cinematographersControverséSteadi-Newbies
69. 2010Bearing failures in Glidecam V-25 stabilizer armsArms
70. 2010Pricing and features of Walter Klassen vehicle mount for camera stabilizationVehicles and Mounts
71. 2010Best practices for directors and crews working with Steadicam operators on setGeneral Discussion
72. 2010Unreasonable and unsafe requests made to Steadicam operators on film setsGeneral Discussion
73. 2010Looseness in the top stage mounting of a Flyer LE camera sliderSteadi-Newbies
74. 2010Steadicam EFP system pricing and marketplace cautionsGeneral Discussion
75. 2010Replacing batteries in a camera sled and converting from PAG to Gold MountBatteries/Power
76. 2010Repair and replacement options for Anton Bauer ProPac 14 batteries in EuropeBatteries/Power
77. 2010Power and control cable compatibility for Arri Alexa cameras on Steadicam rigsCameras (Film/Video/HD)
78. 2010Cleaning foam padding from protective vestsVests
79. 2010Embedding video reels on websites with optimal quality and load speed in 2010Legal / Business Practices
80. 2010Managing heavy tethered camera cables on Steadicam during extended live television workSteadi-Newbies
81. 2010Weight and configuration of Sony F35 cameras on Steadicam rigsCameras (Film/Video/HD)
82. 2010Practical limitations and user experiences with Master Series camera stabilization rigsControverséSled
83. 2010Differences between Steadicam Flyer and Flyer LE models and weight capacity considerationsSteadi-Newbies
84. 2010Cracking sounds during sled tilt operation with carbon center postSled
85. 2010Including overcranked footage in a steadicam operator demo reelSteadi-Newbies
86. 2010Comparison of gyroscope DC-AC voltage converters for camera stabilizationBrackets/Widgets
87. 2010Filming choreographed fight scenes with various camera techniques and rigsOperating
88. 2010Identifying an unmarked shoulder mount stabilizer and diagnosing balance issues with a Panasonic P2 camera.Steadi-Newbies
89. 2010Maintaining level horizons while walking with a Steadicam, particularly addressing sway and operating techniqueSteadi-Newbies
90. 2010Selection and performance characteristics of athletic and hiking socks for different conditionsControverséOperating
91. 2010Vibration issues with Steadicam Pilot versus EasyReady Kit One for lightweight camera workSteadi-Newbies
92. 2010Back pain and discomfort when first using a Glidecam stabilizer systemSteadi-Newbies
93. 2010Using tally output connectors from broadcast cameras to trigger external tally indicatorsCameras (Film/Video/HD)
94. 2010Pricing strategy and rental practices for Steadicam Pilot equipmentGeneral Discussion
95. 2010Comparison of wireless follow focus systems: VariZoom, BarTech, Hocus Focus, and PrestonFollow Focus
96. 2010Suitable grease for repacking arm tonearm trunnions and thrust bearingsArms
97. 2010Materials and methods for custom foam padding in equipment casesCases/Carts/Stands and Transport
98. 2010Alternatives to Preston HU2 batteries for follow focus systemsFollow Focus
99. 2010Glidecam HD4000 gimbal loses balance when rotated despite achieving static balance in one orientationGimbal
100. 2010Adapting a Master arm to work with a Pro sledArms
101. 2010Choosing between Steadicam Pilot and Flyer rigs for a Canon 7D with multiple wireless accessoriesSteadi-Newbies
102. 2010Whether new steadicam operators should take unpaid or low-cost work through Craigslist to build experience and portfolioControverséSteadi-Newbies
103. 2010Methods to access forum content on iPhone devicesForum Support
104. 2010Managing Steadicam gear and transportation for freelance work in New York CityGeneral Discussion
105. 2010Storage and transportation options for a steadicam rig with battery hanger attachmentCases/Carts/Stands and Transport
106. 2010Stabilizing beverage containers on camera slider rails for POV shotsOperating
107. 2010Matching camera weight to stabilizer rig capacitySteadi-Newbies
108. 2010Steadicam operator credit practices in television and film productionsSteadicam Aesthetics
109. 2010Making LCD monitors viewable in bright sunlight using low-cost shade solutionsMonitors
110. 2010Best practices for assistant spotting techniques during backward camera movementSteadi-Newbies
111. 2010Steadicam operation rates and market conditions in Spain around 2010Off Topic
112. 2010Wireless follow focus systems and emerging technologies in focus pullingControverséFollow Focus
113. 2010Accuracy problems in a published list of longest Steadicam shotsControverséGeneral Discussion
114. 2010Mobile forum skin not functioning on BlackBerry devicesForum Support
115. 2010Drop time adjustment strategy when transitioning a steadicam rig from high mode to low mode operationControverséSteadi-Newbies
116. 2010Mounting a Sony EX1 camera to a Steadicam Flyer stabilizerSteadi-Newbies
117. 2010Rebalancing stabilizer rigs when changing prime lenses during shootingSteadi-Newbies
118. 2010Finding bright, lightweight monitors suitable for outdoor daytime operation on small steadicam rigsControverséSteadi-Newbies
119. 2010Pin polarity of Arri BAT connector for powering Alexa camerasCameras (Film/Video/HD)
120. 2010Cinedeck monitor and recording device practical performance and limitations in field useControverséMonitors
121. 2010Improving stabilization technique and reducing unwanted horizontal movement on SteadicamOperating
122. 2010Managing challenging steadicam shots on professional productions with limited preparation timeControverséSteadi-Newbies
123. 2010Stabilizer gimbal control technique for walk cyclesSteadi-Newbies
124. 2010V-lock battery compatibility and performance with digital cinema camerasBatteries/Power
125. 2010Operating steadicam and camera equipment in extreme cold environmentsGeneral Discussion
126. 2010Job management and client information tracking systems for freelance workGeneral Discussion
127. 2010Mounting an off-center monitor on a sledMonitors
128. 2010Bobbling and instability when walking with a Steadicam Flyer-LE and DSLRControverséSteadi-Newbies
129. 2010Side-to-side image drift when changing direction while operating a camera stabilizerSteadi-Newbies
130. 2010Achieving dynamic balance on Steadicam rigs with Canon 5D and similar camera setupsOperating
131. 2010Flying a Phantom HD camera on a cinema rigCameras (Film/Video/HD)
132. 2010Shooting promotional video for a martial arts dojo with limited crew and budgetGeneral Discussion
133. 2010Essential equipment and accessories for professional Steadicam operators beyond the basic rigSteadi-Newbies
134. 2010Panavision-style dovetail mounting screw specificationsBrackets/Widgets
135. 2010BVFF remote focus controller system for budget filmmakingFollow Focus
136. 2010Operating 3D camera rigs in low mode configurationOperating
137. 2010Boxx Meridian HD/SD wireless video transmission system capabilities and performanceVideo Assist and Video Accessories
138. 2010Powering RED cameras using 4-pin XLR connectors and cable assembly optionsBatteries/Power
139. 2010Mounting a Marshall 6.5-inch LCD monitor to an XCS sledMonitors
140. 2010Equipment purchasing strategy for amateur steadicam operators beginning trainingSteadi-Newbies
141. 2010Preparing a Canon 7D camera for aerial filming operationsCameras (Film/Video/HD)
142. 2010Comparison of external HD recorders: Nano-Flash versus Panasonic AG-HMR10 for on-set video captureVideo Assist and Video Accessories
143. 2010Mounting a Marshall Monitor to an Ultimate 2 rig with a monitor support armMonitors
144. 2010Achieving balance and operability with heavy 3D steadicam rigsControverséGeneral Discussion
145. 2010Steadicam use in Blade Runner (1982)Operating
146. 2010Steadicam rig setup and balance issues for beginnersControverséSteadi-Newbies
147. 2010Steadicam single-take cinematography for comedy web series productionGeneral Discussion
148. 2010Warner Bros. insurance policy for Steadicam equipment replacement coverageControverséLegal / Business Practices
149. 2010Equipment choices for smooth POV video of runners and athletes in actionVehicles and Mounts
150. 2010Using on-board recorders for playback and reel compilation in film productionGeneral Discussion
151. 2010Steadicam balance setup mistakes with budget rod system and weight configurationSteadi-Newbies
152. 2010Mohawk fiber optic cable for steadicam use - durability and supplier informationGeneral Discussion
153. 2010Comparison of wireless follow focus systems: VariZoom versus Bartech for Steadicam workFollow Focus
154. 2010Powering multiple wireless devices simultaneously from a camera-mounted battery systemBatteries/Power
155. 2010IDX V-mount battery not powering devices despite charging attemptsBatteries/Power
156. 2010Professional expectations and standards for steadicam operators on film and television setsOperating
157. 2010Noise Ultra2 Vest produces scratching and squeaking sounds during useVests
158. 2010Steadicam operators' experiences with Segway HandsFree systems for camera stabilizationGeneral Discussion
159. 2010Factors determining quality and price differences in professional on-camera monitors versus consumer-grade alternativesMonitors
160. 2010Low mode mounting solutions for HDSLR cinema rigs using cage systemsBrackets/Widgets
161. 2010Wireless iris control link loss and interference problems with Alexa follow focus systemsFollow Focus
162. 2010Comparison of G-70 and PRO steadicam arms based on user experienceControverséArms
163. 2010Technical differences between Archer 1 and Archer 2 steadicam rigsSteadi-Newbies
164. 2010Exceeding the Glidecam HD2000 weight specification with additional camera accessoriesControverséSteadi-Newbies
165. 2010Arri Alexa power supply voltage display and external sled power compatibilityCameras (Film/Video/HD)
166. 2010Unconventional steadicam operating posture and equipment balancing challengesGeneral Discussion
167. 2010Teradek Cube HD video encoder performance, latency characteristics, and practical application in production environmentsControverséVideo Assist and Video Accessories
168. 2010DSLR camera cage systems for professional video productionBrackets/Widgets
169. 2010Equipment and strategy considerations for starting a Steadicam career focused on filming RED camerasSteadi-Newbies
170. 2010Troubleshooting camera post lean during switching movements in Steadicam operationOperating
171. 2010Powering a Sony Z7U camera from an IDX battery system on a SteadiCam Pilot rigBatteries/Power
172. 2010Historical overview of steadicam vest models and their characteristicsVests
173. 2010Replacing lost camera base plate mounting screw for Steadicam Flyer24 LEGeneral Discussion
174. 2010Television production pay rates and rental terms for steadicam operatorsGeneral Discussion
175. 2010Controlling focus, iris, and zoom on broadcast cameras from a gimbal without an assistant cameraControverséFollow Focus
176. 2010Daylight viewability and performance characteristics of compact HD monitors in the 7-inch categoryMonitors
177. 2010Mounting a RED camera on an EFP Steadicam rig for music video productionSled
178. 2010Mounting solution for IDX Cam Wevi battery receivers using V-Lock plates on standsBrackets/Widgets
179. 2010Static and dynamic balance setup for Steadicam with Canon 5D Mark II and Bogen adapterSteadi-Newbies
180. 2010Connecting Canon 5D and 7D cameras to Steadicam Pilot monitors via composite video cablesSteadi-Newbies
181. 2010Mounting an Archos 605 recorder on a snowmobile sledBrackets/Widgets
182. 2010Sourcing sound damping covers for K-6 gyroscopic camera stabilizersIndustry Contacts, Info and Links
183. 2010Compensation and contract terms when productions reschedule or cancel bookingsControverséLegal / Business Practices
184. 2010Zoom and focus control options for broadcast cameras mounted on stabilizersFollow Focus
185. 2010Power dropout issues when powering RED camera directly from MK-V Genesis sled battery boxBatteries/Power
186. 2010Reducing camera shake when mounting broadcast cameras with quick-release plates on stabilizer baseplate rigsCamera Stage/Donkey Box
187. 2010Comparison of steadicam arms: G70, PRO, ACT2, Silverspring, and Luna for budget-conscious operatorsArms
188. 2010Compatibility of RED camera batteries with Steadicam Clipper24 and potential use of third-party batteriesBatteries/Power
189. 2010Powering a Canon 7D from AB battery sled during handheld filmingBatteries/Power
190. 2010Training and practice opportunities for Steadicam operators working with heavier camera rigsControverséGeneral Discussion
191. 2010Mounting a Steadicam stabilizer on Honda ATV models for mobile filmingVehicles and Mounts
192. 2010Safety considerations when using forklifts as camera platforms for film productionControverséGeneral Discussion
193. 2010Time required to set up a steadicam rig from packed to ready for shootingSteadi-Newbies
194. 2010Powering a Sony EX-3 camera from a steadicam rig battery systemBatteries/Power
195. 2010Operating a Steadicam with a parallel 3D HD camera rigOperating
196. 2010HDMI to SDI/HD-SDI conversion for Canon 5D Mark II video output during recordingControverséOperating
197. 2010Battery power configuration for Steadicam Flyer LE with cameraBatteries/Power
198. 2010Selecting a 12V voltage regulator for stabilizing power from a camera rig battery to accessoriesBatteries/Power
199. 2010Impact of low-rate operators on industry standards and pricingControverséLegal / Business Practices
200. 2010Stabilization methods for boat-to-boat camera workVehicles and Mounts
201. 2010Choosing between a Flyer LE and larger steadicam rigs for television camera workControverséSteadi-Newbies
202. 2010Wireless HD-SDI transmission options for live events with Sony XDCAM EX3 camerasGeneral Discussion
203. 2010Rental rates for Steadicam mounts and video conversion equipmentLegal / Business Practices
204. 2010Payment issues with production companies and strategies for operators to secure compensationGeneral Discussion
205. 2010Techniques for achieving stable locked-off shots with Steadicam equipmentOperating
206. 2010Jerry Hill power base sled design and battery placement considerationsGeneral Discussion
207. 2010Getting HD-SDI monitors working with the Alexa camera for video assistGeneral Discussion
208. 2010Service options and maintenance for 3A camera stabilizer armsArms
209. 2010Aftermarket focus rings for Bartech follow focus systemsFollow Focus
210. 2010Using IDX Cam-Wave CW-5HD wireless video transmission for live event coverageVideo Assist and Video Accessories
211. 2010Accidental reflections of steadicam operators becoming visible in shotGeneral Discussion
212. 2010Weight capacity considerations for using a Flyer stabilizer rig with a camera package exceeding the stated limitControverséSteadi-Newbies
213. 2010Steadicam training courses available in LondonSteadi-Newbies
214. 2010Weight rating and operational characteristics of the 3A gimbalGimbal
215. 2010Carrying heavy 3D camera rigs on a Steadicam body rigControverséGeneral Discussion
216. 2010Experience with alternative battery brands compared to premium options like Anton Bauer, IDX, and PagBatteries/Power
217. 2010Single-take music video production using a motorized camera stabilizer with DSLR and prime lensSteadi-Newbies
218. 2010Gore-Link handheld camera support rig performance and practical useBrackets/Widgets
219. 2010Securing payment and terms as a freelance steadicam operator through written agreementsControverséLegal / Business Practices
220. 2010BarTech Digital Receiver compatibility with motors and existing follow focus equipmentFollow Focus
221. 2010Trimming for headroom and its effect on dynamic balance in Steadicam operationControverséSteadi-Newbies
222. 2010Reconciling post alignment with camera level readings on Steadicam Pilot with Canon 7DSteadi-Newbies
223. 2010Weight plates and practice cages for digital SLR camera stabilizer rigsBrackets/Widgets
224. 2010Wireless transmission of camera monitor signals for focus pulling in video workVideo Assist and Video Accessories
225. 2010Navtech Rover digital video transmission system for video assist applicationsVideo Assist and Video Accessories
226. 2010Mounting a Canon 5D DSLR camera on a G50/G70 camera arm with accessory managementControverséVehicles and Mounts
227. 2010Arricam LT HD video tap system with IDX HD transmitter setup and operational considerationsControverséCameras (Film/Video/HD)
228. 2010Magazine jamming issues with Arricam LT 2 Perf cameras during productionControverséCameras (Film/Video/HD)
229. 2010Improvising video monitoring by mounting a camcorder to a film camera's viewfinder during production when primary video systems failedGeneral Discussion
230. 2010Maximizing learning value from a steadicam operator workshopSteadi-Newbies
231. 2010Using a Black Bird stabilizer with a Merlin vest to carry a DSLR camera with telephoto lens and monitorSteadi-Newbies
232. 2010Building homemade camera stabilizer weights as an alternative to commercial antlersBrackets/Widgets
233. 2010Panaglide steadicam system specifications and operational historyPicture and History Archives
234. 2010Comparison of Marell HBM-5M and TB-6 monitors for steadicam workMonitors
235. 2010Diagnosing mechanical vibration issues in Steadicam rigs across different stabilizer models and camerasSteadi-Newbies
236. 2010Finding or creating wrap grip solutions for 2-inch gimbal posts in low mode operationGimbal
237. 2010Balancing camera rigs when mounting Preston focus controllers or ARRI cameras to donkey boxesCamera Stage/Donkey Box
238. 2010Comparison of camera stabilizer vests as alternatives to the WK Bucket modelVests
239. 2010Pricing strategy for beginner steadicam operators and equipment rental ratesSteadi-Newbies
240. 2010Repair and modification of camera stabilizer vestsVests
241. 2010Rickshaw design and construction for steadicam useCases/Carts/Stands and Transport
242. 2010High take counts during commercial and film production shootsOperating
243. 2010Broadcast zoom control options for multi-camera productionsFollow Focus
244. 2010Financing options and business planning for purchasing a Steadicam rig as a startup operationSteadi-Newbies
245. 2010Balancing and weight management of Canon XL-H1 camera on FlyerLE SteadicamSteadi-Newbies
246. 2010Preston HU3 follow focus lens mapping compatibility issuesFollow Focus
247. 2010Comparison of Steadicam Flyer/Zephyr versus Glidecam X-22 for educational use with various camera weightsSteadi-Newbies
248. 2010Building a homemade Steadicam stabilizer rig versus purchasing professional equipmentSteadi-Newbies
249. 2010Comparison of Dionic HC and Red Li-Ion battery performance on Red cameraBatteries/Power
250. 2010Using camera sliders with geared heads without risersBrackets/Widgets
251. 2010Comparison of G50 and Master arm for Steadicam workControverséArms
252. 2010Flyer-LE arm behavior and weight capacity limitsSteadi-Newbies
253. 2010Essential accessories and practical items for Steadicam operatorsBrackets/Widgets
254. 2010Securing loose allen screws on dbox 1 camera stage adjustment knobsCamera Stage/Donkey Box
255. 2010Mounting a Canon 7D DSLR camera with wide-angle lenses on a Steadicam PilotSteadi-Newbies
256. 2010Sony HDC-1500 HD camera setup for television production with SteadicamCameras (Film/Video/HD)
257. 2010Choosing between Anton Bauer and V-Lock battery systems for Steadicam rigsBatteries/Power
258. 2010Nebtek Solar 7" HD monitor compatibility and performance with XCS Ultimate 2 sledControverséMonitors
259. 2010External digital levels compatible with Transvideo HD monitorsMonitors
260. 2010Lightweight zoom and focus control options for broadcast HD lenses on camera stabilizersFollow Focus
261. 2010Upgrading from a Flyer camera sled to a larger rig like the Clipper 2Sled
262. 2010Finding replacement T-handle Allen wrenches and identifying the correct sizeBrackets/Widgets
263. 2010Guidance for purchasing a used stabilizer rig within a limited budgetSteadi-Newbies
264. 2010Comparison of portable monitors for outdoor and studio use, circa 2010Monitors
265. 2010Weight and portability of the Arri Lite LT camera for handheld jungle shootingCameras (Film/Video/HD)
266. 2010Boxx Meridian HD wireless video transmission system for on-set video monitoringControverséVideo Assist and Video Accessories
267. 2010Mounting and configuration options for Arri 416 Plus camera on SteadicamCameras (Film/Video/HD)
268. 2010Steadicam setup and operation for Eurovision Song Contest 2010 broadcastOperating
269. 2010Steadyrig Battery Hanger for camera sleds: design, cost, and practical performanceSled
270. 2010Weather protection gear and methods for operating equipment in rainGeneral Discussion
271. 2010Attaching wireless follow focus motors to Canon 5D cameras with Canon lensesFollow Focus
272. 2010Marshall V-LCD651STX monitor features, performance, and limitations for professional field useMonitors
273. 2010Charger setup recommendations for managing multiple Anton Bauer Dionic HC batteries on film setsBatteries/Power
274. 2010Replacing loose straps on Pilot vest with clip-based fastening systemsSteadi-Newbies
275. 2010Using USB tuner dongles with laptops and tablets to monitor video feeds from RF transmittersVideo Assist and Video Accessories
276. 2010Necessity and configuration of a low-mode bracket for an SR3 camera with IVSCameras (Film/Video/HD)
277. 2010Prerequisites and preparation for transitioning to Steadicam operating from production assistant workSteadi-Newbies
278. 2010Wind management techniques for steadicam operationGeneral Discussion
279. 2010Time lapse photography setup for documenting long-term construction projectsControverséOff Topic
280. 2010Choosing camera equipment and preparing for video production work in UgandaOff Topic
281. 2010On-set iPhone charging solutions using available power sourcesBatteries/Power
282. 2010Wireless follow focus systems for RED camera on steadicamFollow Focus
283. 2010Weight plates and camera support solutions for 5D/7D cinema configurationsBrackets/Widgets
284. 2010Balancing a JVC GYHM-700 camera on a Steadicam Pilot rigCameras (Film/Video/HD)
285. 2010Weight distribution strategies for Canon 7D mounted on Steadicam PilotCameras (Film/Video/HD)
286. 2010Multiple steadicam operators coordinating shots at Eurovision 2010 rehearsalsGeneral Discussion
287. 2010Budget monitoring solutions for wireless camera shoots without dedicated video assistVideo Assist and Video Accessories
288. 2010Comparison of MK-V Lite and V2 Genesis sleds for live TV and commercial production workSled
289. 2010Spring canister combinations and adjustment characteristics for camera support armsArms
290. 2010G-Zoom follow focus controller for camera rigsFollow Focus
291. 2010Powering external devices from RED camera systemsGeneral Discussion
292. 2010Repair options for cracked flexible plastic waist strip on Master Series vestVests
293. 2010Master Series 12V Hirose connectors losing power on sled while video also failsSled
294. 2010Finding compact thumb screws and wing handles for rod bracketsBrackets/Widgets
295. 2010Mitchell mount dimensions for custom hardmount constructionVehicles and Mounts
296. 2010Mounting the EX3 camera to a Flyer LE Steadicam sledgeCameras (Film/Video/HD)
297. 2010Finding replacement cheeseplate for old Video SK camera rigGeneral Discussion
298. 2010Methods for marking equipment cases and transporting them by airCases/Carts/Stands and Transport
299. 2010Modifying Pro Vest lower strap attachment position for easier front accessVests
300. 2010Essential equipment and budget considerations for beginning Steadicam operatorsSteadi-Newbies
301. 2010Standard workflow for focus and exposure checks when operating Steadicam on professional productionsSteadi-Newbies
302. 2010Merlin stabilizer loses balance after being set down and requires frequent rebalancingGeneral Discussion
303. 2010Comparing torque ratings of mechanical follow focus motors for handling stiff camera lensesFollow Focus
304. 2010Condensation fogging between LCD panel and protective glass on Transvideo Cinemonitor IIIAMonitors
305. 2010Steadicam weight limits and arm structural failure when operating 35mm film camerasJournals
306. 2010Aluminum alloy selection and fastener specifications for custom steadicam bracket fabricationBrackets/Widgets
307. 2010Sourcing weight cages and plates for camera support systemsBrackets/Widgets
308. 2010Finding and adapting vehicle mounts for Flyer stabilizer systemsVehicles and Mounts
309. 2010Improving visibility of a TV Logic monitor on a Steadicam rig in bright daylight conditionsMonitors
310. 2010Compatibility of mixing Steadicam and Glidecam components in a stabilizer rigSteadi-Newbies
311. 2010On-camera lighting options for Steadicam work and narrative film productionCameras (Film/Video/HD)
312. 2010Choosing protective cases for Steadicam equipment transportCases/Carts/Stands and Transport
313. 2010Wireless accessory failure when using high-voltage battery setup with film cameraBatteries/Power
314. 2010Comparing V-Mount and Anton Bauer battery mounts for camera rigsControverséBatteries/Power
315. 2010Hearing protection options for live film and music workGeneral Discussion
316. 2010Using a Baer Bel sushi server cage as a low-mode bracket alternative for a 435 ES cameraBrackets/Widgets
317. 2010Flying RED One cameras on Steadicam rigs and weight management strategiesSteadi-Newbies
318. 2010Considerations for purchasing and operating an AR stabilized camera rigControverséSled
319. 2010Modulos wireless video transmitter causing monitor blackouts on video assistControverséVideo Assist and Video Accessories
320. 2010Reducing vibration transmission from monitor mounts to camera rigsMonitors
321. 2010Finding replacement monitor for Steadicam Mini after damageMonitors
322. 2010Comparative performance assessment of Glidecam stabilizer systems versus competitor offeringsSteadi-Newbies
323. 2010Finding longer 12V power cables for Barteck Remote Focus Device with Steadicam FlyerBatteries/Power
324. 2010Steadicam operating challenges comparing film versus digital camera systems on large-scale productionGeneral Discussion
325. 2010Preparing for first 3D camera work with a beam splitter rig on SteadicamCameras (Film/Video/HD)
326. 2010Pricing pressure from undercharging operators and market rate erosion in steadicam workSteadi-Newbies
327. 2010Mounting an Arri SR3 camera on a Flyer LE sled stabilizerSled
328. 2010Mounting bubble levels on camera sleds and monitorsSled
329. 2010How Steadicam technology influenced film style and cinematographyControverséSteadicam Aesthetics
330. 2010Power supply and technical compatibility considerations for Panavision film cameras on steadicam rigsBatteries/Power
331. 2010Wireless video transmission for remote control camera cars experiencing signal dropout during high-motion scenariosControverséVideo Assist and Video Accessories
332. 2010Tango stabilization rig capabilities and market considerationsControverséSteadi-Newbies
333. 2010Sachtler camera sled design features and compatibility observationsSled
334. 2010Shipping lithium-ion camera batteries via ground courierBatteries/Power
335. 2010Equipment and techniques for operating Steadicam during live television eventsSteadi-Newbies
336. 2010Dynamic balancing methods for stabilized camera rigs comparedControverséBrackets/Widgets
337. 2010Steadicam Phantom sled specifications and market positioning within Tiffen's stabilizer product lineSled
338. 2010Evaluation of G-Zoom gimbal-mounted zoom and focus control system with Betacam camera setupFollow Focus
339. 2010Options for steadicam training programs besides TiffenSteadi-Newbies
340. 2010Red Rock Micro remote follow focus system capabilities and development status at NAB 2010ControverséFollow Focus
341. 2010Decimator 2 video converter features and specificationsVideo Assist and Video Accessories
342. 2010Steadicam Zephyr and Tango sled systems and their mechanical design featuresSled
343. 2010Balancing leg and cardiovascular training with regular Steadicam operating workControverséGeneral Discussion
344. 2010Selecting a Steadicam rig and getting started as an operatorSteadi-Newbies
345. 2010Landing pad accessory for Steadicam PRO base modelsBrackets/Widgets
346. 2010Steadicam rig selection and learning requirements for small camcorder workControverséSteadi-Newbies
347. 2010Steadicam Zephyr sled features, specifications, and comparison to Flyer LESled
348. 2010Hot-swap power adapter box for RED camera to switch between sled and block batteries without powering downBatteries/Power
349. 2010P+S Technik Freestyle Rig 3D for stereoscopic camera workCameras (Film/Video/HD)
350. 2010Steadicam JR gimbal attachment mechanism and assemblySteadi-Newbies
351. 2010Monopod support options for Steadicam rigs in space-constrained situationsCases/Carts/Stands and Transport
352. 2010Upgrading camera monitor for improved daylight visibility and HDMI connectivity on a limited budgetMonitors
353. 2010Camera movement techniques used in a short film shot on REDOperating
354. 2010Gyro mounting configurations and power considerations for vehicle-mounted camera rigsBrackets/Widgets
355. 2010Powering wireless follow focus units on stabilized camera rigsControverséSteadi-Newbies
356. 2010Tango Steadicam sled: a compact boom-arm extension for DSLR camerasSled
357. 2010Operating a Canon 5D camera on a Steadicam Ultra2 rig with front-to-back antlers in tight spacesOperating
358. 2010Removing default safety cursor and crosshair display from Clipper monitorMonitors
359. 2010Balancing a Canon 7D with Sigma 10-20mm lens on a Merlin gimbal mounted on a tripod docking stationCameras (Film/Video/HD)
360. 2010Achieving balance and stability with a Steadicam Flyer rig using a lightweight cameraSteadi-Newbies
361. 2010Recovery options when a production company fails to pay for freelance video work and uses footage without compensationLegal / Business Practices
362. 2010Depth measurement of Pro Gimbal hole for arm postGimbal
363. 2010Power distribution issues when using dual batteries with F35/Genesis cameras and Y-cablesControverséBatteries/Power
364. 2010Building practice opportunities as a new steadicam operator without equipment accessSteadi-Newbies
365. 2010Steadicam selection for Canon 7D with travel and wedding videographyControverséSteadi-Newbies
366. 2010iPhone-based follow focus control system for iris and focus motorsFollow Focus
367. 2010Rollerblading as a camera stabilization platform for Steadicam operationsControverséSteadi-Newbies
368. 2010Operating a camera on stairs with longer focal lengthsOperating
369. 2010Power delivery challenges when operating Sony F35 camera on MK-V Steadicam rigsCameras (Film/Video/HD)
370. 2010Antivirus and security software needs for macOS systemsOff Topic
371. 2010Vehicle-mounted camera rigging alternatives to rope harnesses for moving vehicle shotsVehicles and Mounts
372. 2010Process for obtaining custom foam case inserts for camera and steadicam equipmentCases/Carts/Stands and Transport
373. 2010Operating a Steadicam with one functional armControverséGeneral Discussion
374. 2010Preston G4 wireless board upgrade compatibility and performance issuesControverséFollow Focus
375. 2010Choosing between Flyer and Archer 2 steadicam rigs for XDCAM and 5D camera workControverséSteadi-Newbies
376. 2010Mounting instability issues with BFD and M-One follow focus motors on 15mm rod systemsFollow Focus
377. 2010Cleaning sand and dirt from Lemo connectorsBrackets/Widgets
378. 2010Using two Steadicam rigs simultaneously on a music video shootJournals
379. 2010Building a camera dolly mount on a wheelchair frameVehicles and Mounts
380. 2010Low-mode bracket modification for PRO Vest to address arm clearance and boom range issuesControverséVests
381. 2010Melted terminal components on RED battery charger and battery packBatteries/Power
382. 2010Operating a Steadicam Pilot with Canon 7D for music video productionOperating
383. 2010Leveling aids and horizon indicators for small Steadicam rigsSteadi-Newbies
384. 2010Hard focus rings for BFD follow focus systems as alternative to fabric stripsFollow Focus
385. 2010Requirements and design considerations for a high-brightness HD-SDI monitor built for steadicam operationMonitors
386. 2010EFP gimbal losing balance after whip-pans and regaining itGimbal
387. 2010Mounting a camera pointing upward on a Steadicam rig for fulldome filmingOperating
388. 2010Aspect ratio mismatch when downconverting RED One 2.40 format video to a 4:3 monitorMonitors
389. 2010Mounting docking collar below gimbal on camera support sledBrackets/Widgets
390. 2010Accessing new posts since last visit on forum softwareForum Support
391. 2010Adjusting tension and slop in Donkey Box III camera stage controlsCamera Stage/Donkey Box
392. 2010Nebtek monitor performance and customer service experiencesControverséMonitors
393. 2010Setting up a steadicam operator portfolio website with video reel hosting considerationsGeneral Discussion
394. 2010Rolling shutter distortion in Canon 5D and 7D video recording during camera movementGeneral Discussion
395. 2010Adapter compatibility between Tiffen G-70 arm and VZ Pro gimbalGimbal
396. 2010Using high-speed video cameras at 900 fps on Steadicam rigsCameras (Film/Video/HD)
397. 2010Mounting and operating a Spintex gyroscope on an Ultra 1 Steadicam rigOperating
398. 2010Marshall monitor compatibility and features for Steadicam and camera mountingMonitors
399. 2010Equipment options for achieving fast tracking shots similar to the Trainspotting opening sequenceOperating
400. 2010Motorized stage effectiveness and value for Steadicam camera mounting systemsControverséCamera Stage/Donkey Box