What operators found

• The SSB-3 bracket, designed for the Volt control unit, can hold a low-mode monitor as an alternative mounting point.2024 Facebook
• A Steadicam® hard mount on a dolly or GFM Bazooka with wheels allows lateral and height corrections via the arm while keeping the rig base stable, using a wide stance, sandbags, and one foot anchoring the base.2024 FacebookDisputed
• Gaps between the balls in old PRO pan bearings are normal and result from wear of the white spacing discs, which are typically made of nylon or Teflon.2024 Facebook
• The Wave horizontal stabilizer significantly extends the overall sled length; one experienced operator recommended relocating the X/Y fine-adjustment stage to the bottom of the sled, similar to the XCS design, or rebuilding the sled accordingly, noting this modification is less demanding than commonly assumed.2024 Facebook
• The Level is reported by trade show visitors to be compact and significantly lighter than the Wave, possibly less than half the weight.2024 FacebookDisputed
• Many operators prefer the short post on the M2 for its compact form, increased rigidity, reduced vibration, greater leg clearance, and easier navigation around obstacles.2024 FacebookDisputed

Still argued about

1. 2024Compact dolly alternatives to the Steadicam® arm for dialogue scenes and operator ergonomicsFacebookThe Steadicam Group
2. 2024MK-V The Level horizon stabilizer: geometry, weight, and compatibility compared to Wave and AR-Mini systemsFacebookThe Steadicam Group
3. 2024Short versus telescoping posts on M2 Steadicam® sleds: trade-offs in height range, stability, and operating flexibility.FacebookThe Steadicam Group

Often in the same threads

Volt19, Low Mode15, Zephyr13, Top Stage12, Artemis8, ALEXA 355, Trinity 25, Dovetail Plate3, Gimbal Bearing3, Hard Mount3, Monitor Bracket3, Trinity 13

All threads

1. 2024Using the SSB-3 side bracket for low-mode monitor mounting on ARRI Artemis Trinity and Steadicam® Volt.FacebookArri Artemis Trinity
2. 2024Compact dolly alternatives to the Steadicam® arm for dialogue scenes and operator ergonomicsDisputedFacebookThe Steadicam Group
3. 2024Gaps between ball races in old Steadicam® PRO pan bearings: normal wear and service life.FacebookThe Steadicam Group
4. 2024Minimizing sled length when using a Wave horizontal stabilizer, and performance of the MK-V Level alternative.FacebookSteadicam operators group
5. 2024MK-V The Level horizon stabilizer: geometry, weight, and compatibility compared to Wave and AR-Mini systemsDisputedFacebookThe Steadicam Group
6. 2024Short versus telescoping posts on M2 Steadicam® sleds: trade-offs in height range, stability, and operating flexibility.DisputedFacebookThe Steadicam Group
7. 2024Packing a Sled into a transport case (e.g. Peli 1615 Air): layouts, foam, and weight considerations.FacebookSteadicam operators group
8. 2024Shimbol Memory 7 Pro as a Steadicam® monitor: build quality, SDI connectivity, recording capability, latency, and cost comparison to SmallHD and Blackmagic alternatives.FacebookThe Steadicam Group
9. 2024Upgrading video cable in Steadicam® Aero 30 center pole from 3G-SDI to 12G-SDIFacebookSteadicam operators group
10. 2024Achieving neutral balance on ARRI Trinity 2 without the pendulum in all positions, and balancing the asymmetrical head.DisputedFacebookArri Artemis Trinity
11. 2024Transitioning from low mode to high mode during a boom-up on a handheld Steadicam® arm without a dolly or Trinity rigDisputedFacebookThe Steadicam Group
12. 2024Eliminating vertical bounce (stepping motion) from handheld stabilizer footageFacebookThe Steadicam Group
13. 2024Physical fitness training for Steadicam® and handheld camera operatorsFacebookSteadicam operators group
14. 2024SmallRig entry into the Steadicam® market with budget vests and arms: operator assessment of low-cost manufacturers.DisputedFacebookSteadicam operators group
15. 2024Entry-level rig comparison: Glidecam X-22 at USD 2,200 versus lightweight alternatives and professional progression paths.DisputedFacebookThe Steadicam Group
16. 2024Choosing an entry-to-advanced stabilizer rig in the 3,000–5,000 USD budget rangeDisputedFacebookSteadicam operators group
17. 2024Financing a Steadicam® rig entry: dealer programs, equipment finance, bank loans, used purchases, and staged upgrades.FacebookThe Steadicam Group
18. 2024Tiffen Steadicam® Axis with integrated Volt as an upgrade for owner-operators and DPs flying RED V-Raptor on occasional projectsDisputedFacebookThe Steadicam Group
19. 2024Centering Sony cameras in the ARRI Trinity T1 using custom-made riser plates instead of ARRI factory plates.FacebookArri Artemis Trinity
20. 2024Operating an ARRI 16SR3 16mm film camera on Steadicam®: grounding, video taps, balance shifts, and mounting options.FacebookSteadicam operators group
21. 2024ALEXA 35 Live compatibility with the ARRI Trinity: standard body versus fibre-return moduleFacebookArri Artemis Trinity
22. 2024Mounting Sony Venice 2 on ARRI Trinity with SAM-0 plate: build configuration and balancing strategies.FacebookArri Artemis Trinity
23. 2024High-frequency vibrations on ARRI Trinity at steep downward tilt and roll/post rotation: top support point solutions and motor tuning.FacebookArri Artemis Trinity
24. 2024Low-profile mounting of ARRI ALEXA 35 to Steadicam® Flyer using minimal-height base plates.FacebookThe Steadicam Group
25. 2024ARRI Trinity 1 Live upgrade (NAB 2024): broadcast mounting plates, tally integration, and control optionsFacebookArri Artemis Trinity
26. 2024Controlling zoom on a servo lens via MasterGrip MGT-2 over LBUS alongside AC's WCU-4/Hi-5 on ARRI Trinity 2 with RED Komodo XDisputedFacebookArri Artemis Trinity
27. 2024Motorized cmotion Rota-Pola-Stage rotatable polarizing filter in the matte box: weight versus convenience on Steadicam®FacebookSteadicam operators group
28. 2024Adapting ARRI Trinity-Air docking fork to alternative dock systems; head-to-tripod collision in low mode due to fork proximity to baby pan.FacebookArri Artemis Trinity
29. 2024Transitioning from front to back vest: timeline for physical and mental adaptationDisputedFacebookSteadicam operators group
30. 2024Choosing a back support vest to pair with a front-mounted Steadicam® rig for extended shooting: WK vest versus modular systems like xSpine.DisputedFacebookThe Steadicam Group
31. 2024Cinetex padding upgrade for the GPI PRO vest: durability, fit, and breathability.FacebookThe Steadicam Group
32. 2024Identifying the 3-pin Lemo connector (12/24 V) for the GPI PRO system and choosing straight vs. angled versionsDisputedFacebookSteadicam operators group
33. 2024Tiffen M1 Bottom Stage: blue 24-V indicator LED not illuminating despite normal camera and accessory power delivery.DisputedFacebookSteadicam operators group
34. 2024Steadicam® Axis power connector pinout and battery plate availabilityFacebookSteadicam operators group
35. 2024Finding and eliminating minor vibrations in a Steadicam® sled, especially in low mode: systematic inspection procedure.FacebookThe Steadicam Group
36. 2024Low-mode angled bracket with reducer post for G50X arm post: specifications and load limits.FacebookThe Steadicam Group
37. 2024Inner diameter of the telescoping post on Tiffen M2 with 1.75-inch outer section.FacebookThe Steadicam Group
38. 2024Shorter and lighter post options for ARRI Artemis 2 without the high round top sectionFacebookThe Steadicam Group
39. 2024Stiff or slipping grip on PRO-HD Sled telescope post after humid climate exposure: cleaning and shim adjustment.FacebookThe Steadicam Group
40. 2024Static balance drift on MK-V Nexus sled with Betz-style top stage after 90/180° rotation caused by loose adjustment block.FacebookThe Steadicam Group
41. 2024Converting a Tiffen M1 from a tilting top stage to a fixed stage: labor, weight savings, and operational trade-offs.DisputedFacebookSteadicam operators group
42. 2024Camera plate and Wave falling from Artemis Top Stage during transport despite locked safety pin—orientation and wear of retention mechanismFacebookArri Artemis Trinity
43. 2024Auto-record function on Transvideo Starlite HD monitor: compatibility with ARRI, RED and Sony cameras.DisputedFacebookSteadicam operators group
44. 2024Electronic spirit levels for video monitors: integrated sensors versus external gyro-stabilized indicators.DisputedFacebookThe Steadicam Group
45. 2024Monitor size choice for lightweight Steadicam® rigs: 5-inch versus 7-inch trade-offsDisputedFacebookThe Steadicam Group
46. 2024Choosing and integrating a low-mode monitor for Steadicam® rigs: performance, power stability, and balance considerations.FacebookSteadicam operators group
47. 2024New Volt prototype with pan axis: whip pans with telephoto and implications for operator skill.DisputedFacebookThe Steadicam Group
48. 2024Tiffen Volt losing horizon lock in Sticky Mode with motor vibration—systematic fault-finding.FacebookThe Steadicam Group
49. 2024MK-V 2-inch gimbal with Tiffen Volt combination: compatibility, cost, and leveling alternatives.DisputedFacebookThe Steadicam Group
50. 2024Cleaning and lubricating the pan bearing on a gimbal, with focus on the Tiffen M2; removal of bearing shrouds for service.FacebookThe Steadicam Group
51. 2024Tension adjustment of gimbal latch screws on Tiffen Archer 2: absence of factory specification and field workarounds.FacebookThe Steadicam Group
52. 2024Replacing a broken gimbal clamp on a Volt gimbal and field repair options.FacebookSteadicam operators group
53. 2024PRO-Rig with Volt gimbal and short gimbal handle: improper arm angle and thumb reach to gimbal collar.DisputedFacebookSteadicam operators group
54. 2024Re-centering a Tiffen Archer 2 gimbal via hidden adjustment screws under yoke capsFacebookSteadicam operators group
55. 2024Experience with the XCS Midarm Swivel on Steadicam® PRO ArmsFacebookThe Steadicam Group
56. 2024Socket block mounting height on arms and back vests: navel height versus belt line, and adjustment criteria.DisputedFacebookThe Steadicam Group
57. 2024Stiff movement in a new Steadicam® A-30 arm (Axis system): load and lateral adjusters difficult to turn—lubrication advice.FacebookThe Steadicam Group
58. 2024Tuning the SmartSystem Arm X1: spring selection and XTune adjustment method.FacebookSteadicam operators group
59. 2024Effective practice methods for steadicam operatorsSteadi-Newbies
60. 2024Starting a Steadicam career and choosing an appropriate entry-level rigSteadi-Newbies