SteadiHub
Sign InSign Up

Still argued about

959 threads in the archive

No agreementThese threads ended with operators on different sides. The entries show the positions instead of an answer.

Often in the same threads

Zephyr79, Top Stage70, Low Mode68, Volt67, Artemis47, Master Series34, MDR32, Gimbal Bearing28, Follow Focus82, G-7029, Modulus32, BFD27

All threads

  1. 2026Trinity vs. 360-degree roll head: practical job prospects and system flexibility for operator investment decisions.FacebookSteadicam operators group
  2. 2026Ownership and rental of intercom headsets: business case and operational impact on Steadicam® work.FacebookSteadicam operators group
  3. 2026Rust on black-oxide screws after one week of coastal shooting on a Tiffen M2: material specification versus maintenance protocol.FacebookThe Steadicam Group
  4. 2026Rigging a RED Komodo 6K on a CAME-TV Steadicam® sled for improved inertia and operator technique.FacebookSteadicam operators group
  5. 2026Operating a Steadicam® Zephyr without Volt: drop time, horizon control, and the effect of upper-rig weight distribution on balance.FacebookSteadicam operators group
  6. 2026Entry-level stabilizer strategy on a 15,000 USD budget: Rever EVO versus used Artemis 2 or M2 plus Volt, in a market with limited secondhand availability.FacebookThe Steadicam Group
  7. 2026Choosing between upgrading an older ProVid-2 kit or investing in a professional rig: workshop-first versus equipment-first approach for beginners.FacebookSteadicam operators group
  8. 2026First stabilizer purchase: Steadicam® Elite (14 kg payload, integrated Volt 3) versus Rever Evo (higher payload) and used-market strategy.FacebookThe Steadicam Group
  9. 2026Discontinuation of Steadicam® Aero 30 and Axis entry-level rigs, availability of service and spare parts for discontinued models, and purchasing strategy alternatives.FacebookThe Steadicam Group
  10. 2026Rate structures for Steadicam® operating in live television production versus scripted and commercial work.FacebookThe Steadicam Group
  11. 2026Upgrading cheap arm springs for Sony FX3 and repairing stripped threads with threaded inserts (Heli-Coil).FacebookSteadicam operators group
  12. 2026Mounting a G70x arm on the rear socket block of a Walter Klassen vest (transition from Exovest, regular operator setup)FacebookThe Steadicam Group
  13. 2026Power distribution failure of D-Tap step-down splitters on a Venice 2 rig, and proper AKS accessory power supply methods.FacebookSteadicam operators group
  14. 2026Power loss on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.FacebookArri Artemis Trinity
  15. 2026Voltage display discrepancies between camera and RCP on ARRI Artemis Trinity 2: 24 V rail showing 23.4 V at RCP versus 28 V at camera.FacebookArri Artemis Trinity
  16. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.FacebookSteadicam operators group
  17. 2026Choosing long-term battery investment for Steadicam® sleds: Anton Bauer, Core SWX, IDX, Indipro, and custom cell builds.FacebookThe Steadicam Group
  18. 2026Why a 150 Wh battery at the sled powers the camera for only ~20 minutes versus two to three times longer when mounted on-body, and how to extend runtime.FacebookThe Steadicam Group
  19. 2026MK-V Level horizon stabilizer: specifications, plate compatibility, price, and comparison to Wave.FacebookThe Steadicam Group
  20. 2026Tightening a loose quick-release lever on the Top Stage dovetail plate, and preventing camera slip during shoulder operation.FacebookThe Steadicam Group
  21. 2026Finding a bright (1500–2000 nits) low-mode monitor with recording and SDI I/O to replace a defective Transvideo Starlite.FacebookSteadicam operators group
  22. 2026Monitor brightness and heat performance in direct sunlight: SmallHD 703 UB versus alternatives.FacebookThe Steadicam Group
  23. 2026Low-mode monitor selection for Volt Brain rig: latency performance of Transvideo Starlite versus current alternatives.FacebookThe Steadicam Group
  24. 2026Adjusting play in a Steadicam® Master Series gimbal yoke and balancing it for smooth 180-degree pan without tipping.FacebookSteadicam operators group
  25. 2026Preventing socket block fracture on GPI-PRO arms during hardmount on rough terrain: rod end durability and assembly technique.FacebookThe Steadicam Group
  26. 2026Buying strategy for a 25,000 USD entry-level rig: used Artemis-1 with Flowcine X-Arm versus Rever-Evo Sled, and the case for learning on budget equipment firstFacebookThe Steadicam Group
  27. 2026Rocket Arm (elastic band arm) versus traditional spring arms like the G70x: performance, weight, build, and design dispute.FacebookThe Steadicam Group
  28. 2026Gimbal bearing lubrication: oil quantity, product selection, and the performance versus protection trade-off.FacebookThe Steadicam Group
  29. 2026Pan-bearing friction and image oscillation in Tiffen gimbals with Volt power cable: root cause and acceptance criteria.FacebookThe Steadicam Group
  30. 2026Choosing between Wave, Volt 2, and MK-V Level gimbals: performance in wind, rig weight, maintenance, and mode switching.FacebookSteadicam operators group
  31. 2026Upgrading an M1 Volt gimbal from 1.5-inch to 1.75-inch center rod: insert replacement procedure and encoder ring considerations.FacebookSteadicam operators group
  32. 2026Removing a PRO gimbal from a VZ grip for conversion to a Volt-modified gimbal.FacebookSteadicam operators group
  33. 2026EFP gimbal grip binding on the center rod: causes, cleaning, and repair versus replacement options.FacebookSteadicam operators group
  34. 2026Lubricating gimbal bearings after cleaning when Tri-Flow PTFE is unavailable for months.FacebookSteadicam operators group
  35. 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rod mounts and CamJam mounts to minimize vibrationsSteadiHub
  36. 2026Choosing a vest: the one purchase that cannot be made from specificationsOperator practice
  37. 2026Choosing and troubleshooting the monitor on a stabilizer rigOperator practice
  38. 2026Volt generations, and whether the system is necessary at allOperator practice
  39. 2026Developing camera operating skills from competent to excellent through intentional practice and philosophical approachGeneral Discussion
  40. 2025Maximum camera payload on Steadicam® Axis: ALEXA Mini LF with Signature Primes and power limitations.FacebookThe Steadicam Group
  41. 2025ARRI Trinity 2 software issues in 2025: head firmware problems, update caution, alternatives, and operator tuning requests.FacebookArri Artemis Trinity
  42. 2025Pan drift on ARRI Trinity 2 gimbal when docked and balanced—normal bearing play or defect?FacebookArri Artemis Trinity
  43. 2025MK-V Level: compact roll-stabilization module, function, pricing, and early operator feedbackFacebookSteadicam operators group
  44. 2025Comparison of MK-V Level prototype and Betz Wave: flight characteristics, weight savings, and low-mode operation.FacebookThe Steadicam Group
  45. 2025Volt 3 presets and motor behavior in practice; compatibility with M2 and upgrade decisions from PRO or M1 sleds.FacebookThe Steadicam Group
  46. 2025Gimbal upgrade path for GPI PRO CineLive: Volt 2 now versus Volt 3 or alternative horizon stabilizers (Wave, MK-V Level), and adapter compatibility.FacebookThe Steadicam Group
  47. 2025Roll stabilization performance of the MK-V Level on set versus Volt and Wave systems, and necessity of electronic horizon correction.FacebookThe Steadicam Group
  48. 2025Power supply for Steadicam® Axis on hard mount: cable routing and battery options for extended interview operation without camera batteryFacebookSteadicam operators group
  49. 2025Organizing and transporting a Steadicam® kit in cases: storage, logistics, and rapid deployment.FacebookThe Steadicam Group
  50. 2025Brightness requirements for low-mode monitoring: Blackmagic Video Assist 5-inch 3G at 300 nits versus alternatives for outdoor use.FacebookSteadicam operators group
  51. 2025ARRI Trinity tilt control: MGT-2 joystick in Trinity mode versus Follow Mode with joystick correction for dynamic shotsFacebookArri Artemis Trinity
  52. 2025Purchasing the ARRI Artemis 2 sled with Volt power system: ergonomics, modularity, and comparison to Tiffen alternatives.FacebookSteadicam operators group
  53. 2025Market saturation of ARRI Trinity systems in 2025: demand collapse, rental rates, and ROI viability across regions.FacebookArri Artemis Trinity
  54. 2025Buying a budget vest-and-arm rig (Walimex Pro with Laing stabilizer) for 5–8 kg cameras at events: cost-benefit and learning-curve trade-offs.FacebookSteadicam operators group
  55. 2025Choosing a first rig after Archer 2 experience: Steadicam® Axis with Aero-30 arm for mid-size cinema cameras (FX6, Pyxis, ALEXA Mini, upgraded FX3).FacebookSteadicam operators group
  56. 2025Balancing a light camera with added mass: weight plate below the camera versus practice cage on a Volt system.FacebookSteadicam operators group
  57. 2025ALEXA 35 powering down when 24 V sled cable is disconnected or sled battery is swapped; voltage priority and status indicators.FacebookThe Steadicam Group
  58. 2025SmallHD Ultra 7 as a sled monitor: image quality versus off-center mounting and weight distribution concernsFacebookSteadicam operators group
  59. 2025Bright 5- to 6-inch low-mode monitors with integrated level display: comparison of options and level accuracy concerns.FacebookThe Steadicam Group
  60. 2025Isolating vibration sources in a PRO CineLive rig running at speed: camera plate, battery mounts, gimbal belt tension, and arm cushioning.FacebookSteadicam operators group
  61. 2025Rubber-band suspension arm with adjustable anchor points: first impressions versus spring-based and competing band designs.FacebookSteadicam operators group
  62. 2025G70x arm clearance with Kickback-Link on older Walter Klassen vest: socket block options and workarounds.FacebookThe Steadicam Group
  63. 2025Using small-format Segways versus X2 models as motion bases for Steadicam® and Trinity: payload limits, redundancy, stability, and alternative solutions.SteadiHub
  64. 2025Tightening side-to-side play in the ARRI Trinity TST-2 top stage donkey box and accessing the spare parts catalogue for self-service maintenance.SteadiHub
  65. 2025ARRI Trinity overcurrent and e-stop errors after Firmware 3.0 update, and production-readiness concerns.SteadiHub
  66. 2025ARTEMIS gimbal friction and bearing service: manufacturer claims versus operator experience across multiple gimbal types.SteadiHub
  67. 2025Artemis gimbal friction pan stiffness, DIY lubrication versus factory service, and field serviceability.SteadiHub
  68. 2025ARRI Artemis 2 sled with Volt post, gimbal options, and comparison with Artemis 1, Trinity 2, and third-party stabilizers.SteadiHub
  69. 2024Compact dolly alternatives to the Steadicam® arm for dialogue scenes and operator ergonomicsFacebookThe Steadicam Group
  70. 2024MK-V The Level horizon stabilizer: geometry, weight, and compatibility compared to Wave and AR-Mini systemsFacebookThe Steadicam Group
  71. 2024Short versus telescoping posts on M2 Steadicam® sleds: trade-offs in height range, stability, and operating flexibility.FacebookThe Steadicam Group
  72. 2024Achieving neutral balance on ARRI Trinity 2 without the pendulum in all positions, and balancing the asymmetrical head.FacebookArri Artemis Trinity
  73. 2024Transitioning from low mode to high mode during a boom-up on a handheld Steadicam® arm without a dolly or Trinity rigFacebookThe Steadicam Group
  74. 2024SmallRig entry into the Steadicam® market with budget vests and arms: operator assessment of low-cost manufacturers.FacebookSteadicam operators group
  75. 2024Entry-level rig comparison: Glidecam X-22 at USD 2,200 versus lightweight alternatives and professional progression paths.FacebookThe Steadicam Group
  76. 2024Choosing an entry-to-advanced stabilizer rig in the 3,000–5,000 USD budget rangeFacebookSteadicam operators group
  77. 2024Tiffen Steadicam® Axis with integrated Volt as an upgrade for owner-operators and DPs flying RED V-Raptor on occasional projectsFacebookThe Steadicam Group
  78. 2024Controlling zoom on a servo lens via MasterGrip MGT-2 over LBUS alongside AC's WCU-4/Hi-5 on ARRI Trinity 2 with RED Komodo XFacebookArri Artemis Trinity
  79. 2024Transitioning from front to back vest: timeline for physical and mental adaptationFacebookSteadicam operators group
  80. 2024Choosing a back support vest to pair with a front-mounted Steadicam® rig for extended shooting: WK vest versus modular systems like xSpine.FacebookThe Steadicam Group
Show more
Ask about Still argued aboutThe answer cites the archive