What operators found

• Many people discard used batteries instead of recycling them, but recycling services are available and typically free.2006 Batteries/Power
• The follow focus assistant should maintain close proximity to the camera operator and actors to keep the subject in focus and monitor the action, rather than walking far behind the rig.2006 Follow Focus
• The Preston Handset 3 first production batch consisted of 100 units released in late 2006, with serial numbers assigned randomly regardless of order list position2006 Follow Focus
• A new operator can generate work inquiries by making their availability known, even without established credentials, typically receiving multiple low-budget project offers monthly.2006 Steadi-Newbies
• The top insert of the gimbal has an adjustment mechanism with four slots that must be backed off to allow the gimbal to slide onto the post2006 Gimbal
• Documentation of work history and invoices helps support a lost wages claim with insurance companies.2006 Legal / Business PracticesDisputed

Still argued about

1. 2006Recovering lost wages and injury compensation from insurance after an accidentLegal / Business Practices
2. 2006Handheld camera operating technique and creative choices in Children of Men extended takesOperating
3. 2006Steadicam operator compensation and rate negotiation challenges in the industryLegal / Business Practices

Often in the same threads

Follow Focus46, Low Mode26, Master Series19, BFD18, Modulus15, Top Stage14, G-709, MDR9, FI+Z8, Dovetail Plate6, Arm Post5, Artemis5

All threads

1. 2006Recycling options for disposable and rechargeable batteries used in film and television productionBatteries/Power
2. 2006Bartech follow focus receiver antenna orientation and RF signal interference on SteadicamFollow Focus
3. 2006Preston Handset 3 follow focus system initial release and featuresFollow Focus
4. 2006Building a first professional Steadicam reel with minimal prior experienceSteadi-Newbies
5. 2006Installing a VZ gimbal onto a post encounters resistance from the top insertGimbal
6. 2006Recovering lost wages and injury compensation from insurance after an accidentDisputedLegal / Business Practices
7. 2006Selecting and evaluating a used Steadicam Flyer rig for use with HVX200 cameraSteadi-Newbies
8. 2006Professional cleaning and maintenance costs for camera support equipment after dusty work environmentsSled
9. 2006Handheld camera operating technique and creative choices in Children of Men extended takesDisputedOperating
10. 2006Kino Flo Kamio ring light pricing and what components are included in different kitsBrackets/Widgets
11. 2006Compatibility between AB and V-lock battery mounting systemsBatteries/Power
12. 2006Options for handling exhausted Trimpac batteriesBatteries/Power
13. 2006Modifications to strengthen and improve an EFP stabilizing vestVests
14. 2006Sourcing female 4-pin Hirose connectors for video adapter constructionVideo Assist and Video Accessories
15. 2006Identifying the monitor model used on Steadicam Flyer and Glidecam L7Pro rigsMonitors
16. 2006Flyer monitor mirror function not working when camera operates upside-down in low-modeSteadi-Newbies
17. 2006Splitting video signals from cameras causes signal degradation and requires amplificationVideo Assist and Video Accessories
18. 2006Performance of G50 arm with light cameras below typical weight specificationsArms
19. 2006Powering a Genesis camera with Dionic 90 batteries on a Steadicam rigBatteries/Power
20. 2006Weight plate positioning for camera stabilization in low-mode operationOperating
21. 2006Verifying the ownership history and legitimacy of a used Steadicam equipment purchaseSteadi-Newbies
22. 2006Performance characteristics and applications of helical antennas compared to shark fin antennasVideo Assist and Video Accessories
23. 2006Comparison of large Pelican protective cases for equipment transportCases/Carts/Stands and Transport
24. 2006Random focus motor twitches in Bartech BFD follow focus systemFollow Focus
25. 2006Bartech follow focus system reliability in challenging conditionsFollow Focus
26. 2006Weight specifications and operational considerations for flying an AJ-HDC20A HD camera on a Steadicam FlyerSteadi-Newbies
27. 2006A&J Cases protective quality and custom foam design for camera sledsCases/Carts/Stands and Transport
28. 2006Stabilizer camera operation and rigging advice for fashion show videographySteadi-Newbies
29. 2006Master Arm elbow cracking and replacement optionsArms
30. 2006Comparing 8.4" 1024x768 and 7" 800x480 LCD monitors for professional video workMonitors
31. 2006Steadicam operators on Miami Vice television series in the 1980sOperating
32. 2006Managing physical fatigue during extended live television productions with a SteadicamSteadi-Newbies
33. 2006Recelling and alternative power solutions for Preston microwave unit batteriesBatteries/Power
34. 2006Battery cycle counting and mixing batteries with different ages and capacitiesBatteries/Power
35. 2006Hard case options and solutions for transporting Steadicam sled rigsCases/Carts/Stands and Transport
36. 2006Steadicam equipment visible in Rocky film footageOperating
37. 2006Steadicam operator compensation and rate negotiation challenges in the industryDisputedLegal / Business Practices
38. 2006Front-mounted camera vest recommendations for lightweight and ergonomic load distributionVests
39. 2006Comparison of LCD and monochrome green CRT monitors for Steadicam operationsDisputedMonitors
40. 2006Video signal dimming when connecting external devices to Clipper 2 sledDisputedVideo Assist and Video Accessories
41. 2006Design considerations for building custom camera stabilizer cages for DV camerasBrackets/Widgets
42. 2006Performance comparison of Tiffen Power Cube lithium-ion batteries versus alternative battery technologies for high-amperage camera equipmentBatteries/Power
43. 2006Career progression and professional naming when using non-brand stabilization equipmentSteadi-Newbies
44. 2006Achieving dynamic balance with a Steadicam Flyer carrying the HVX200 cameraOperating
45. 2006Steadicam Flyer low mode operation and accessory optionsSteadi-Newbies
46. 2006Comparison of PRO and G70 camera crane arms for different load capacities and working conditionsDisputedArms
47. 2006Import duties and sales tax obligations on international purchasesLegal / Business Practices
48. 2006Operating Steadicam in low mode with and without a D/F/J bracketSteadi-Newbies
49. 2006Recelled Anton Bauer Proformer battery not recognized by chargersBatteries/Power
50. 2006Steadicam practice strategy for beginners starting with a FlyerSteadi-Newbies
51. 2006Powering LED panel lights from camera rigs and motorizing iris controlBatteries/Power
52. 2006Portable shelter options for protecting Steadicam equipment and operator during outdoor filming in rain and windSteadi-Newbies
53. 2006Selecting and assembling a follow focus system for independent film productionFollow Focus
54. 2006Unprofessional booking practices in commercial steadicam work where production companies fail to confirm or cancel jobs with operatorsSteadi-Newbies
55. 2006Battery options and configurations for powering the XCS Ultimate Steadicam sled with various cinema camerasDisputedBatteries/Power
56. 2006Steadicam mounting on camels for film productionVehicles and Mounts
57. 2006Cost and compatibility of camera mounting screwsBrackets/Widgets
58. 2006WeissCam HS-1 high-speed digital camera specifications and operational characteristicsCameras (Film/Video/HD)
59. 2006Wireless video transmission systems for on-set monitoring at 2.4 GHzVideo Assist and Video Accessories
60. 2006Weight measurements of various steadicam support armsArms
61. 2006Pin configuration for ARRI camera 3-pin RS power and remote control portBatteries/Power
62. 2006Archos video recorder not detecting video signal from external sourcesVideo Assist and Video Accessories
63. 2006Transportation options for film equipment when flying out of Los Angeles airportsCases/Carts/Stands and Transport
64. 2006Steadicam positioning and technique for high school football game coverageSteadi-Newbies
65. 2006Wireless video transmission performance over water and antenna optimization for video linksVideo Assist and Video Accessories
66. 2006Vision correction options for camera operators using viewfindersGeneral Discussion
67. 2006Creative Steadicam techniques and unconventional camera movement solutions for tight shooting schedulesOperating
68. 2006Using Google AdWords to advertise services to the Steadicam communityForum Support
69. 2006Steadicam operation practice exercises for beginners without formal trainingSteadi-Newbies
70. 2006Portable LCD TV tuners and monitors in the 7-9 inch range for field useVideo Assist and Video Accessories
71. 2006Tool-free gimbal modifications using lower handle clamps instead of hex screwsDisputedSteadi-Newbies
72. 2006J-7 follow focus zoom control malfunctions during live shootingFollow Focus
73. 2006Operating steadicam on a music video with extreme depth of field challenges and difficult lighting conditionsOperating
74. 2006Filmmaking techniques used in Children of Men to achieve long uninterrupted action sequencesOperating
75. 2006Extending infrared remote control signals to a recorder using fiber optic cableVideo Assist and Video Accessories
76. 2006Portable monitor constructed from a Dewalt flashlight for on-set video monitoringVideo Assist and Video Accessories
77. 2006Eliminating squeaking noises from a Steadyrig armArms
78. 2006Battery voltage monitoring options for film production equipment using P-tap connectionsBatteries/Power
79. 2006Combining a MK-V Lite sled with a Flyer arm and alternative vestsSled
80. 2006Modifications to Pro-Lite camera sled for increased weight capacity and gyro mountingSled
81. 2006Professional presentation and website copy standards for emerging steadicam operatorsSteadi-Newbies
82. 2006Wireless video transmission system with low latency and wall penetration capabilityVideo Assist and Video Accessories
83. 2006Steadicam work on reality TV shows without monitoring or shot blockingSteadi-Newbies
84. 2006When to replace springs in a Glidecam steadicamArms
85. 2006Digital video recorders for on-set video review and monitoring as alternatives to tape-based decksVideo Assist and Video Accessories
86. 2006Storage and transport solutions for Steadicam vests and arm rigsVests
87. 2006Leg numbness while wearing camera stabilizer vests during operationVests
88. 2006Steadicam weight plate configuration for wide mounting setupsSteadi-Newbies
89. 2006Learning Steadicam operation as a career beginner in middle ageSteadi-Newbies
90. 2006Production company altering timecards and refusing to honor guaranteed employment agreementsDisputedLegal / Business Practices
91. 2006Monitoring and focus pulling setup for steadicam HD shooting with small cameras and 35mm lens adaptersDisputedSteadi-Newbies
92. 2006Rust prevention and lubrication for firearm arm assembliesDisputedArms
93. 2006Abdominal muscle tear sustained while operating a Steadicam with an unexpected battery weightOperating
94. 2006Lemo connector wire separation on PRO I battery base from repeated rotationSled
95. 2006Panasonic HDX-900 HD camera capabilities and downconversion featuresCameras (Film/Video/HD)
96. 2006Challenges with operating a Steadicam Mini at maximum payload capacitySteadi-Newbies
97. 2006Physical demands of extended Steadicam operating during long shooting daysOperating
98. 2006Fore/aft knob slipping on a camera stage due to wear or damageCamera Stage/Donkey Box
99. 2006Comparison of portable video recording devices for on-set video assist useVideo Assist and Video Accessories
100. 2006Prioritizing equipment purchases for beginners: wireless focus control versus video transmitterSteadi-Newbies
101. 2006Adjusting tension on the Steadicam Mini armSteadi-Newbies
102. 2006Getting started as a steadicam operator: training, market entry, and business considerationsSteadi-Newbies
103. 2006Jr. monitor displaying solid white screen despite confirmed video signal outputMonitors
104. 2006Pinout configuration for VTR Start/Stop control on Panasonic SDX900 camera lensport connectorCameras (Film/Video/HD)
105. 2006Routing video output from prosumer cameras to both wireless video transmitter and onboard monitor simultaneouslyMonitors
106. 2006Preston digital follow focus camera run function incompatibility with Arri SR2DisputedFollow Focus
107. 2006Lens vibration issues with Steadicam sled and Sony cameraSled
108. 2006Vehicle selection and cargo safety strategies for transporting film equipmentCases/Carts/Stands and Transport
109. 2006Steadicam operation challenges in music video production with fast editingOperating
110. 2006Compatibility of AB Trimpacs batteries with Pro sled battery mounting positionsBatteries/Power
111. 2006Fraudulent eBay sellers using hacked accounts and suspicious selling practicesGeneral Discussion
112. 2006Impact of 2009 analog TV shutdown on UHF spectrum and wireless video equipmentDisputedVideo Assist and Video Accessories
113. 2006Operating a Steadicam Flyer with camera payloads near or at maximum weight limitsGeneral Discussion
114. 2006Balancing a Steadicam 3A rig with an undersized DV cameraSteadi-Newbies
115. 2006Maximum focal length recommendations for Steadicam work during dynamic shotsSteadi-Newbies
116. 2006Initial setup and operation of Steadicam SK2 rig with lightweight cameraSteadi-Newbies
117. 2006Steadicam training workshops and their effectiveness for learning equipment operationDisputedGeneral Discussion
118. 2006Troubleshooting dead AB ProPac 14 Nickel Cadmium batteries that show no voltageBatteries/Power
119. 2006Using low mode brackets for stabilizing cameras on steadicam rigs during extended low-mode workBrackets/Widgets
120. 2006Upgrading an Archer rig from 12V to 24V power systemBatteries/Power
121. 2006Selection and performance characteristics of wireless video transmitter systems for production useVideo Assist and Video Accessories
122. 2006Converting a 3A Steadicam power base from 12V 3A to 24V NP-1 batteries and evaluating performanceBatteries/Power
123. 2006Stanton zoom and focus controller for follow focus workFollow Focus
124. 2006Powering an ARRI 435 camera with battery systems designed for lower voltageBatteries/Power
125. 2006Operating a Steadicam in the narrow cabin of a commercial aircraftOperating
126. 2006Lubrication recommendations for camera stage wormgears and sliding plate surfacesCamera Stage/Donkey Box
127. 2006Rust protection and maintenance of camera arm boltsArms
128. 2006Fine vibration in video on stabilized rig during operationDisputedOperating
129. 2006Finding and replacing arm trunnions for a 3A arm rebuildArms
130. 2006Protecting yourself from non-payment by production companies through contracts and insurance leverageLegal / Business Practices
131. 2006Master monitor displaying reduced image width with black side bands in both 16:9 and 4:3 formatsMonitors
132. 2006Compatibility of Master Arm with Klassen back-mount vestVests
133. 2006Hytron batteries displaying single flashing bar on fuel gauge when mountedBatteries/Power
134. 2006Power supply and magazine compatibility for ARRI SRIII cameraCameras (Film/Video/HD)
135. 2006Granada production company's refusal to insure freelance-supplied equipment like steadicamsLegal / Business Practices
136. 2006Adapter options for mounting Pro Sled cameras on Master Series armsBrackets/Widgets
137. 2006Methods for achieving ground-level camera shots with Steadicam rigsDisputedCenter Post
138. 2006Comparison of Steadicam brand versus Glidecam and other stabilizer alternatives for beginnersDisputedSteadi-Newbies
139. 2006Sony XDCAM camera balancing and handling on camera stabilization rigsCameras (Film/Video/HD)
140. 2006Operating motion control and camera equipment in extreme heat and fine sand conditions for filming in the SaharaGeneral Discussion
141. 2006Cleaning and lubrication procedure for a Flyer gimbalGimbal
142. 2006EFP sled with MMX conversion experiencing repeated breaker trips when battery is connectedSled
143. 2006Operating experience requirements and practical characteristics of the MK-V Automatic Revolution Steadicam rigOperating
144. 2006Eliminating pendulum swaying motion when operating a Steadicam rigOperating
145. 2006Equipment considerations for beginners purchasing their first Steadicam rigSteadi-Newbies
146. 2006Airline baggage weight restrictions and strategies for transporting heavy equipment casesCases/Carts/Stands and Transport
147. 2006Image orientation and weight specifications for Redrock Micro M2 adapter with HVX 200 cameraCameras (Film/Video/HD)
148. 2006Compatibility of Anton Bauer Lifesaver Quad Fast Charger with digital Trimpac batteriesDisputedBatteries/Power
149. 2006Choosing between music and dialogue for demo reels in cinematographyGeneral Discussion
150. 2006Telescoping center posts for Flyer kitesCenter Post
151. 2006Methods for controlling camera lens iris remotely using mechanical or electronic devicesFollow Focus
152. 2006Mounting a camera rig on a Bantam dolly for running profile shotsVehicles and Mounts
153. 2006Operating the Aaton XTR Prod camera for extended continuous filmingCameras (Film/Video/HD)
154. 2006Achieving low camera mounting heights with Flyer steadicam and Panasonic HVX200Brackets/Widgets
155. 2006Inverting a camera yoke for low-mode operationBrackets/Widgets
156. 2006Preston MDR-2 follow focus connection failures in high temperature environmentsFollow Focus
157. 2006Purchasing guidance for Steadicam rigs, new versus used, and component selection for beginnersSteadi-Newbies
158. 2006Hands Free transporter mount for Steadicam: practical experience and ergonomic challengesVehicles and Mounts
159. 2006Starting resources for learning steadicam operationSteadi-Newbies
160. 2006Pinout configuration for 12-pin Hirose connector on XC-75/77 video tap camerasVideo Assist and Video Accessories
161. 2006Building a budget rickshaw vehicle from plywood and steel for camera workVehicles and Mounts
162. 2006Practical comparison of front-mounted versus back-mounted Steadicam vests for different shooting scenariosVests
163. 2006Large-wheel Handsfree transporter used for camera work at the British Open golf tournamentVehicles and Mounts
164. 2006Effectiveness and limitations of video stabilization software in post-productionDisputedOff Topic
165. 2006Operational differences between Arri SR3 and Arri 435 cameras for steadicam workDisputedCameras (Film/Video/HD)
166. 2006Wireless motorized top stage experiencing uncontrolled backward drift when Preston MDR controller is connectedCamera Stage/Donkey Box
167. 2006Archos AV500 and AV700 video accessory pinout assignments and voltage regulation modificationsVideo Assist and Video Accessories
168. 2006Weight specifications for 35mm, 16mm, and HD cameras configured for Steadicam operationCameras (Film/Video/HD)
169. 2006Docking stand pin failures and solutions for stabilizer rigsCases/Carts/Stands and Transport
170. 2006Using Steadicam equipment with Sony F900 cameraSled
171. 2006Legal rights to use production footage on demo reels and websitesLegal / Business Practices
172. 2006Thin and flexible BNC cables for on-set video monitoring during long shootsBrackets/Widgets
173. 2006Upgrading the center post on an IIIA camera support to a telescoping modelCenter Post
174. 2006Repurposing legacy BP-95dx batteries for alternative power applicationsBatteries/Power
175. 2006Modifying the Archer gimbal system to provide 24 volt power output for camerasBatteries/Power
176. 2006Choosing a business structure for Steadicam operators in the United StatesLegal / Business Practices
177. 2006Safety procedures and risk assessment for aerial filming from helicoptersGeneral Discussion
178. 2006Back pain when wearing a custom back-mounted camera vest during extended useVests
179. 2006Manual focus pulling on a Steadicam rig without an assistantSteadi-Newbies
180. 2006Building a temporary monitor setup from a daylight LCD panel for field useMonitors
181. 2006Identifying the power connector for follow focus equipment on cinema rigsFollow Focus
182. 2006Physical conditioning and technique for learning Steadicam operation on lightweight camerasSteadi-Newbies
183. 2006Diagnosing and correcting gimbal balance issues through axis alignment and bearing adjustmentDisputedGimbal
184. 2006Characteristics and handling of the SteadyRig Silver Spring demo armNews, Events, Workshops
185. 2006Steadicam training workshops in the United StatesSteadi-Newbies
186. 2006Finding RF frequency charts for Modulus wireless video transmitter units to avoid interference with other RF systems on locationVideo Assist and Video Accessories
187. 2006Anton Bauer Pro Pac 14 battery showing temperature hold error on chargerBatteries/Power
188. 2006Rain protection solutions for camera rigs and equipmentCases/Carts/Stands and Transport
189. 2006Back end points and deferred compensation for camera crew on low-budget filmsLegal / Business Practices
190. 2006Recommended operating weight for a 3A spring arm stabilizerArms
191. 2006Troubleshooting and repair of non-functional IIIA monitor electronicsMonitors
192. 2006UHF receiver options for wireless video transmission on film setsVideo Assist and Video Accessories
193. 2006Achieving a 'floaty' aesthetic with Steadicam when directors request it despite it contradicting traditional operating techniqueOperating
194. 2006Finding online video tutorials and training resources for Steadicam operationDisputedSteadi-Newbies
195. 2006Looseness detected between yoke arms and gimbal post on a new Steadicam FlyerSteadi-Newbies
196. 2006Insurance certificate requirements for personal Steadicam equipment rentals to major film studiosLegal / Business Practices
197. 2006Signal delay characteristics of Sony 750 HDCAM downconverted SD outputDisputedCameras (Film/Video/HD)
198. 2006Tri-ax jumper cables and adapters for HD camera to truck transmission in remote shootsBrackets/Widgets
199. 2006Powering follow focus motors and accessories from DSR450 AB power outputFollow Focus
200. 2006Steadicam operations at the 2006 FIFA World CupOperating
201. 2006Comparison of Steadicam workshops in Maine and Pennsylvania (SOA)News, Events, Workshops
202. 2006Preventing unwanted video signal feedback from a camcorder with shared input/output connector on a Steadicam rigVideo Assist and Video Accessories
203. 2006Center post upgrade for EFP sled with carbon fiber option and improved base mountingCenter Post
204. 2006Spring configuration and tensioning in GPI camera support armsDisputedArms
205. 2006Practical considerations and modifications for the Steadicam Archer rigSteadi-Newbies
206. 2006Forum membership approval system and moderation strategies for managing spam and maintaining community qualityDisputedForum Support
207. 2006Initial experience with Steadicam Merlin compared to Glidecam 2000 for handheld camera stabilizationSteadi-Newbies
208. 2006Techniques for operating a Steadicam while entering and exiting a vehicleOperating
209. 2006Arri D-20 HD camera performance, power consumption, and steadicam operation characteristicsCameras (Film/Video/HD)
210. 2006Showreel length and distribution strategy for steadicam operatorsJournals
211. 2006Wireless video transmission system for camera operation with assessment of 12-frame delay impactDisputedVideo Assist and Video Accessories
212. 2006Steadicam arm failure modes and stress factors with back-mounted vestsDisputedArms
213. 2006Sourcing replacement cables and repair options for spring arm equipmentArms
214. 2006Operating steadicam and camera stabilizers on tracking vehicles at high speedsVehicles and Mounts
215. 2006Proposed ergonomic back-mounted steadicam vest design with spine-conforming backplateDisputedVests
216. 2006Running tally light cable through a carbon fiber center post without compromising structural integrityCenter Post
217. 2006Sourcing small LCD monitors with tuners for on-set video monitoringVideo Assist and Video Accessories
218. 2006Choosing between Steadicam Flyer and Glidecam V25 for a 13-pound camera setup with plans to add accessories.DisputedSteadi-Newbies
219. 2006Preventing sway and horizon loss during stops and pans on steadicam rigsDisputedSteadi-Newbies
220. 2006Converting EFP camera rigs from CRT to LCD monitorsMonitors
221. 2006Impedance rating and cable compatibility for CIT Shark Fin antennasVideo Assist and Video Accessories
222. 2006Whether Steadicam operators need transport carts or can work with stands and bagsDisputedCases/Carts/Stands and Transport
223. 2006Physical fitness and gym training for operating work performanceOperating
224. 2006Battery charger redundancy and lifesaver maintenance mode practices for Anton Bauer batteriesBatteries/Power
225. 2006Weighing camera components and selecting appropriate steadicam weight capacitySteadi-Newbies
226. 2006Safety guidelines and health requirements for Steadicam operatorsLegal / Business Practices
227. 2006Powering Preston follow focus systems with 12-volt camera rigsFollow Focus
228. 2006Setting up a Steadicam JR with a Panasonic NV GS400 camera for amateur useSteadi-Newbies
229. 2006Rest requirements and safety practices for Steadicam operators during production workLegal / Business Practices
230. 2006Operating a Steadicam on wet grass and protecting equipment during rain shootsOperating
231. 2006Protective covers for camera rigs mounted on stabilizer standsCases/Carts/Stands and Transport
232. 2006Cost-effective camera stabilization system selection and component sourcingLegal / Business Practices
233. 2006Titanium spring failures in stabilizer camera armsArms
234. 2006BBC attempted freelancer rate cuts in 2006 affecting UK camera and sound crewLegal / Business Practices
235. 2006Career longevity and physical demands of Steadicam operatingOperating
236. 2006Upgrading to professional camera stabilization equipment and managing the financial investmentGeneral Discussion
237. 2006Removing the red button on a Master Series top stage to replace a worn stop discCamera Stage/Donkey Box
238. 2006Early specifications and design philosophy of Sony's new 2/3-inch CineAlta camera systemDisputedCameras (Film/Video/HD)
239. 2006Eliminating squeaking noises from wireless microphone vestsVests
240. 2006Protecting equipment from rust and corrosion when operating in humid tropical environmentsOperating
241. 2006EFP gimbal wear symptoms and repair considerationsGimbal
242. 2006Whether beginning steadicam operators should accept unpaid or low-pay work to gain experienceSteadi-Newbies
243. 2006Wireless follow focus options for 35mm still lenses adapted to video camerasFollow Focus
244. 2006Replacing an EFP Steadicam center post with carbon fiber and managing connector cablesCenter Post
245. 2006Repairing a cracked plastic waistband on a camera support vestVests
246. 2006California usage tax on equipment purchased outside the countryLegal / Business Practices
247. 2006Converting 24p video from F900 camera to PAL output formatMonitors
248. 2006Motorizing polarizer rotation on cinema camera support equipmentBrackets/Widgets
249. 2006Identifying and sourcing small XLR connectors for tally system applicationsSled
250. 2006Hard-mounting camera stabilizer to golf cart for following shots with bicyclist and joggerVehicles and Mounts
251. 2006Power supply options for reducing camera battery weight on camera rigsBrackets/Widgets
252. 2006Choosing a lightweight steadicam rig for a 2.5 kg HDV cameraSled
253. 2006Selecting protective cases for transporting cameras via airplaneOff Topic
254. 2006Operating camera equipment while standing in 2 feet of water during a film shootOperating
255. 2006Hernia surgery recovery and return to steadicam operating workOperating
256. 2006Finding repair and recelling services for Anton Bauer batteries in the UK and EuropeBatteries/Power
257. 2006Wireless follow focus and zoom control compatibility with Steadicam FlyerFollow Focus
258. 2006Challenges when operating Steadicam on stairs and navigating tight spaces for first film productionSteadi-Newbies
259. 2006Safety hazards and incidents when operating a Steadicam during filmingJournals
260. 2006Preston DM-2 focus motor overheating during high-power operation on setDisputedFollow Focus
261. 2006Lithium-ion battery technology for film production power demandsBatteries/Power
262. 2006Technical features and practical capabilities of the Arriflex 416 Plus Super 16 cameraCameras (Film/Video/HD)
263. 2006Comparison of Chrosziel camera stages and their suitability for different camera support systemsCamera Stage/Donkey Box
264. 2006Balancing a lightweight camera on Steadicam Jr with bottom-heavy issueSteadi-Newbies
265. 2006Integrating Supacam onboard recorder with film camera stabilizer rigsVideo Assist and Video Accessories
266. 2006Steadicam Ultra2 sled design features and practical field experienceSled
267. 2006Traveling with film and broadcast equipment on commercial flightsCases/Carts/Stands and Transport
268. 2006Physical training and injury prevention for Steadicam operatorsDisputedGeneral Discussion
269. 2006Steadicam equipment modular design and zoom control system specificationsSled
270. 2006Follow focus motor control modes for cinema camerasFollow Focus
271. 2006Operating techniques and connector configurations for the Sony F-900 camera with P&S Techniks Pro-35 adapterCameras (Film/Video/HD)
272. 2006Adjustable monitor brackets for camera rigs with fore-aft positioning capabilityBrackets/Widgets
273. 2006Steadicam operator preferences between Don Juan and walking backwards techniquesOperating
274. 2006Compatibility between Anton Bauer MP4D charger and Hytron 50 batteriesBatteries/Power
275. 2006Power connector specifications and voltage conversion setup for Clipper II sled with Arri SR-3 cameraSled
276. 2006Legal status and insurance implications of independent contractor agreements in production workDisputedLegal / Business Practices
277. 2006Finding and sourcing CIT Sharkfin antennas for video assist receiversVideo Assist and Video Accessories
278. 2006Finding replacement rods for camera support equipmentBrackets/Widgets
279. 2006Balancing and equipping a magiqcam steadicam rig with monitor and batterySteadi-Newbies
280. 2006Mounting a light panel on camera during live performance shooting with restricted accessJournals
281. 2006Power connector specifications for Moviecam SL camerasCameras (Film/Video/HD)
282. 2006Focus drift problem in IIIA monitor caused by failing voltage triplerMonitors
283. 2006Technovision Technohead geared camera head characteristics and maintenanceOperating
284. 2006Converting a Master Steadicam CRT monitor to an LCD monitorMonitors
285. 2006Operating zoom and focus controls simultaneously on stabilized camera rigsDisputedFollow Focus
286. 2006Wireless video transmission system used in Formula 1 racing broadcastsOff Topic
287. 2006Mounting wireless intercom packs and triax cables on a Klassen camera harness for multi-camera live television workVests
288. 2006RF interference affecting wireless follow focus systems in Times Square, NYCDisputedFollow Focus
289. 2006Handsfree Steadicam mount on Segway platform: capabilities, pricing, and practical considerationsDisputedOperating
290. 2006Setting up a Glidecam v-20 stabilizer with a Panasonic Varicam cameraIndustry Contacts, Info and Links
291. 2006Steadicam and camera techniques used in the film Inside ManOperating
292. 2006Steadicam operations at the 2006 Commonwealth Games swimming eventsOperating
293. 2006Rocker-style zoom controls for Steadicam follow focus systems and mounting modificationsFollow Focus
294. 2006Modifying ARCHOS video recorder base station to power professional camera sledsVideo Assist and Video Accessories
295. 2006Diagonal torn framelines appearing on Duo Framliner generator when used with Arricam ST camera tapMonitors
296. 2006Docking brackets with tilt capability for Steadicam during lighting and technical adjustmentsDisputedCases/Carts/Stands and Transport
297. 2006Steadicam operation during horse training shootsSteadi-Newbies
298. 2006Steadicam contrazoom techniques and zoom motor control systemsGeneral Discussion
299. 2006Balancing a Panasonic Varicam HD on a Glidecam V-20 stabilizerOperating
300. 2006Operational characteristics and limitations of the Fisher 11 dolly compared to larger modelsOff Topic
301. 2006Installing cross back straps on vests with hip pad mountingVests
302. 2006Back pain when using a steadicam vest after a period of inactivityVests
303. 2006Experiences and comparisons of MK-V follow focus system against Preston and Scorpio alternativesFollow Focus
304. 2006Nerve compression and circulation problems from wearing a Steadicam vest while sittingGeneral Discussion
305. 2006Getting hired as a camera stabilization operator and building a career in film and television productionDisputedSteadi-Newbies
306. 2006Master Series arm sticking at range extremes with back-mounted vestArms
307. 2006Safety of viewing laser pointer dots reflected on surfaces versus direct beam exposureGeneral Discussion
308. 2006Compatibility and frequency analysis of BarTech and theboxx follow focus wireless systemsFollow Focus
309. 2006Mounting a Bartech focus receiver to dovetail plate rails without permanent attachmentFollow Focus
310. 2006Practical advice for a new Steadicam operator beginning their first feature filmGeneral Discussion
311. 2006Collaborative zoom control between focus puller and DP using remote wireless devicesFollow Focus
312. 2006Operational considerations and mounting issues when using an Ikegami HL-55 camera on a Steadicam rigCameras (Film/Video/HD)
313. 2006Hirose connector pinout for ProVid Steadicam monitor cableMonitors
314. 20061.2 GHz video transmitter system for film production with variable power and channel optionsDisputedVideo Assist and Video Accessories
315. 2006Operator and camera crew rates for low-budget HD features in the UK around 2006Legal / Business Practices
316. 2006Labor dispute and production relocation when a non-union film production became unionizedLegal / Business Practices
317. 2006Mounting a camera equipped with a Steadicam plate onto a geared or fluid headBrackets/Widgets
318. 2006Comparing Steadicam SK2 and Flyer for use with Arri SR film cameraDisputedSteadi-Newbies
319. 2006Availability of repair and service options for follow focus motors SKF FMG-6 and Heden M28Follow Focus
320. 2006Selecting and upgrading a Magliner or Liberator steadicam cart for beginnersCases/Carts/Stands and Transport