SteadiHub
Sign InSign Up

Still argued about

959 threads in the archive

No agreementThese threads ended with operators on different sides. The entries show the positions instead of an answer.

Often in the same threads

Zephyr79, Top Stage70, Low Mode68, Volt67, Artemis47, Master Series34, MDR32, Gimbal Bearing28, Follow Focus82, G-7029, Modulus32, BFD27

All threads

  1. 2026Trinity vs. 360-degree roll head: practical job prospects and system flexibility for operator investment decisions.FacebookSteadicam operators group
  2. 2026Ownership and rental of intercom headsets: business case and operational impact on Steadicam® work.FacebookSteadicam operators group
  3. 2026Rust on black-oxide screws after one week of coastal shooting on a Tiffen M2: material specification versus maintenance protocol.FacebookThe Steadicam Group
  4. 2026Rigging a RED Komodo 6K on a CAME-TV Steadicam® sled for improved inertia and operator technique.FacebookSteadicam operators group
  5. 2026Operating a Steadicam® Zephyr without Volt: drop time, horizon control, and the effect of upper-rig weight distribution on balance.FacebookSteadicam operators group
  6. 2026Entry-level stabilizer strategy on a 15,000 USD budget: Rever EVO versus used Artemis 2 or M2 plus Volt, in a market with limited secondhand availability.FacebookThe Steadicam Group
  7. 2026Choosing between upgrading an older ProVid-2 kit or investing in a professional rig: workshop-first versus equipment-first approach for beginners.FacebookSteadicam operators group
  8. 2026First stabilizer purchase: Steadicam® Elite (14 kg payload, integrated Volt 3) versus Rever Evo (higher payload) and used-market strategy.FacebookThe Steadicam Group
  9. 2026Discontinuation of Steadicam® Aero 30 and Axis entry-level rigs, availability of service and spare parts for discontinued models, and purchasing strategy alternatives.FacebookThe Steadicam Group
  10. 2026Rate structures for Steadicam® operating in live television production versus scripted and commercial work.FacebookThe Steadicam Group
  11. 2026Upgrading cheap arm springs for Sony FX3 and repairing stripped threads with threaded inserts (Heli-Coil).FacebookSteadicam operators group
  12. 2026Mounting a G70x arm on the rear socket block of a Walter Klassen vest (transition from Exovest, regular operator setup)FacebookThe Steadicam Group
  13. 2026Power distribution failure of D-Tap step-down splitters on a Venice 2 rig, and proper AKS accessory power supply methods.FacebookSteadicam operators group
  14. 2026Power loss on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.FacebookArri Artemis Trinity
  15. 2026Voltage display discrepancies between camera and RCP on ARRI Artemis Trinity 2: 24 V rail showing 23.4 V at RCP versus 28 V at camera.FacebookArri Artemis Trinity
  16. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.FacebookSteadicam operators group
  17. 2026Choosing long-term battery investment for Steadicam® sleds: Anton Bauer, Core SWX, IDX, Indipro, and custom cell builds.FacebookThe Steadicam Group
  18. 2026Why a 150 Wh battery at the sled powers the camera for only ~20 minutes versus two to three times longer when mounted on-body, and how to extend runtime.FacebookThe Steadicam Group
  19. 2026MK-V Level horizon stabilizer: specifications, plate compatibility, price, and comparison to Wave.FacebookThe Steadicam Group
  20. 2026Tightening a loose quick-release lever on the Top Stage dovetail plate, and preventing camera slip during shoulder operation.FacebookThe Steadicam Group
  21. 2026Finding a bright (1500–2000 nits) low-mode monitor with recording and SDI I/O to replace a defective Transvideo Starlite.FacebookSteadicam operators group
  22. 2026Monitor brightness and heat performance in direct sunlight: SmallHD 703 UB versus alternatives.FacebookThe Steadicam Group
  23. 2026Low-mode monitor selection for Volt Brain rig: latency performance of Transvideo Starlite versus current alternatives.FacebookThe Steadicam Group
  24. 2026Adjusting play in a Steadicam® Master Series gimbal yoke and balancing it for smooth 180-degree pan without tipping.FacebookSteadicam operators group
  25. 2026Preventing socket block fracture on GPI-PRO arms during hardmount on rough terrain: rod end durability and assembly technique.FacebookThe Steadicam Group
  26. 2026Buying strategy for a 25,000 USD entry-level rig: used Artemis-1 with Flowcine X-Arm versus Rever-Evo Sled, and the case for learning on budget equipment firstFacebookThe Steadicam Group
  27. 2026Rocket Arm (elastic band arm) versus traditional spring arms like the G70x: performance, weight, build, and design dispute.FacebookThe Steadicam Group
  28. 2026Gimbal bearing lubrication: oil quantity, product selection, and the performance versus protection trade-off.FacebookThe Steadicam Group
  29. 2026Pan-bearing friction and image oscillation in Tiffen gimbals with Volt power cable: root cause and acceptance criteria.FacebookThe Steadicam Group
  30. 2026Choosing between Wave, Volt 2, and MK-V Level gimbals: performance in wind, rig weight, maintenance, and mode switching.FacebookSteadicam operators group
  31. 2026Upgrading an M1 Volt gimbal from 1.5-inch to 1.75-inch center rod: insert replacement procedure and encoder ring considerations.FacebookSteadicam operators group
  32. 2026Removing a PRO gimbal from a VZ grip for conversion to a Volt-modified gimbal.FacebookSteadicam operators group
  33. 2026EFP gimbal grip binding on the center rod: causes, cleaning, and repair versus replacement options.FacebookSteadicam operators group
  34. 2026Lubricating gimbal bearings after cleaning when Tri-Flow PTFE is unavailable for months.FacebookSteadicam operators group
  35. 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rod mounts and CamJam mounts to minimize vibrationsSteadiHub
  36. 2026Choosing a vest: the one purchase that cannot be made from specificationsOperator practice
  37. 2026Choosing and troubleshooting the monitor on a stabilizer rigOperator practice
  38. 2026Volt generations, and whether the system is necessary at allOperator practice
  39. 2026Developing camera operating skills from competent to excellent through intentional practice and philosophical approachGeneral Discussion
  40. 2025Maximum camera payload on Steadicam® Axis: ALEXA Mini LF with Signature Primes and power limitations.FacebookThe Steadicam Group
  41. 2025ARRI Trinity 2 software issues in 2025: head firmware problems, update caution, alternatives, and operator tuning requests.FacebookArri Artemis Trinity
  42. 2025Pan drift on ARRI Trinity 2 gimbal when docked and balanced—normal bearing play or defect?FacebookArri Artemis Trinity
  43. 2025MK-V Level: compact roll-stabilization module, function, pricing, and early operator feedbackFacebookSteadicam operators group
  44. 2025Comparison of MK-V Level prototype and Betz Wave: flight characteristics, weight savings, and low-mode operation.FacebookThe Steadicam Group
  45. 2025Volt 3 presets and motor behavior in practice; compatibility with M2 and upgrade decisions from PRO or M1 sleds.FacebookThe Steadicam Group
  46. 2025Gimbal upgrade path for GPI PRO CineLive: Volt 2 now versus Volt 3 or alternative horizon stabilizers (Wave, MK-V Level), and adapter compatibility.FacebookThe Steadicam Group
  47. 2025Roll stabilization performance of the MK-V Level on set versus Volt and Wave systems, and necessity of electronic horizon correction.FacebookThe Steadicam Group
  48. 2025Power supply for Steadicam® Axis on hard mount: cable routing and battery options for extended interview operation without camera batteryFacebookSteadicam operators group
  49. 2025Organizing and transporting a Steadicam® kit in cases: storage, logistics, and rapid deployment.FacebookThe Steadicam Group
  50. 2025Brightness requirements for low-mode monitoring: Blackmagic Video Assist 5-inch 3G at 300 nits versus alternatives for outdoor use.FacebookSteadicam operators group
  51. 2025ARRI Trinity tilt control: MGT-2 joystick in Trinity mode versus Follow Mode with joystick correction for dynamic shotsFacebookArri Artemis Trinity
  52. 2025Purchasing the ARRI Artemis 2 sled with Volt power system: ergonomics, modularity, and comparison to Tiffen alternatives.FacebookSteadicam operators group
  53. 2025Market saturation of ARRI Trinity systems in 2025: demand collapse, rental rates, and ROI viability across regions.FacebookArri Artemis Trinity
  54. 2025Buying a budget vest-and-arm rig (Walimex Pro with Laing stabilizer) for 5–8 kg cameras at events: cost-benefit and learning-curve trade-offs.FacebookSteadicam operators group
  55. 2025Choosing a first rig after Archer 2 experience: Steadicam® Axis with Aero-30 arm for mid-size cinema cameras (FX6, Pyxis, ALEXA Mini, upgraded FX3).FacebookSteadicam operators group
  56. 2025Balancing a light camera with added mass: weight plate below the camera versus practice cage on a Volt system.FacebookSteadicam operators group
  57. 2025ALEXA 35 powering down when 24 V sled cable is disconnected or sled battery is swapped; voltage priority and status indicators.FacebookThe Steadicam Group
  58. 2025SmallHD Ultra 7 as a sled monitor: image quality versus off-center mounting and weight distribution concernsFacebookSteadicam operators group
  59. 2025Bright 5- to 6-inch low-mode monitors with integrated level display: comparison of options and level accuracy concerns.FacebookThe Steadicam Group
  60. 2025Isolating vibration sources in a PRO CineLive rig running at speed: camera plate, battery mounts, gimbal belt tension, and arm cushioning.FacebookSteadicam operators group
  61. 2025Rubber-band suspension arm with adjustable anchor points: first impressions versus spring-based and competing band designs.FacebookSteadicam operators group
  62. 2025G70x arm clearance with Kickback-Link on older Walter Klassen vest: socket block options and workarounds.FacebookThe Steadicam Group
  63. 2025Using small-format Segways versus X2 models as motion bases for Steadicam® and Trinity: payload limits, redundancy, stability, and alternative solutions.SteadiHub
  64. 2025Tightening side-to-side play in the ARRI Trinity TST-2 top stage donkey box and accessing the spare parts catalogue for self-service maintenance.SteadiHub
  65. 2025ARRI Trinity overcurrent and e-stop errors after Firmware 3.0 update, and production-readiness concerns.SteadiHub
  66. 2025ARTEMIS gimbal friction and bearing service: manufacturer claims versus operator experience across multiple gimbal types.SteadiHub
  67. 2025Artemis gimbal friction pan stiffness, DIY lubrication versus factory service, and field serviceability.SteadiHub
  68. 2025ARRI Artemis 2 sled with Volt post, gimbal options, and comparison with Artemis 1, Trinity 2, and third-party stabilizers.SteadiHub
  69. 2024Compact dolly alternatives to the Steadicam® arm for dialogue scenes and operator ergonomicsFacebookThe Steadicam Group
  70. 2024MK-V The Level horizon stabilizer: geometry, weight, and compatibility compared to Wave and AR-Mini systemsFacebookThe Steadicam Group
  71. 2024Short versus telescoping posts on M2 Steadicam® sleds: trade-offs in height range, stability, and operating flexibility.FacebookThe Steadicam Group
  72. 2024Achieving neutral balance on ARRI Trinity 2 without the pendulum in all positions, and balancing the asymmetrical head.FacebookArri Artemis Trinity
  73. 2024Transitioning from low mode to high mode during a boom-up on a handheld Steadicam® arm without a dolly or Trinity rigFacebookThe Steadicam Group
  74. 2024SmallRig entry into the Steadicam® market with budget vests and arms: operator assessment of low-cost manufacturers.FacebookSteadicam operators group
  75. 2024Entry-level rig comparison: Glidecam X-22 at USD 2,200 versus lightweight alternatives and professional progression paths.FacebookThe Steadicam Group
  76. 2024Choosing an entry-to-advanced stabilizer rig in the 3,000–5,000 USD budget rangeFacebookSteadicam operators group
  77. 2024Tiffen Steadicam® Axis with integrated Volt as an upgrade for owner-operators and DPs flying RED V-Raptor on occasional projectsFacebookThe Steadicam Group
  78. 2024Controlling zoom on a servo lens via MasterGrip MGT-2 over LBUS alongside AC's WCU-4/Hi-5 on ARRI Trinity 2 with RED Komodo XFacebookArri Artemis Trinity
  79. 2024Transitioning from front to back vest: timeline for physical and mental adaptationFacebookSteadicam operators group
  80. 2024Choosing a back support vest to pair with a front-mounted Steadicam® rig for extended shooting: WK vest versus modular systems like xSpine.FacebookThe Steadicam Group
  81. 2024Identifying the 3-pin Lemo connector (12/24 V) for the GPI PRO system and choosing straight vs. angled versionsFacebookSteadicam operators group
  82. 2024Tiffen M1 Bottom Stage: blue 24-V indicator LED not illuminating despite normal camera and accessory power delivery.FacebookSteadicam operators group
  83. 2024Converting a Tiffen M1 from a tilting top stage to a fixed stage: labor, weight savings, and operational trade-offs.FacebookSteadicam operators group
  84. 2024Auto-record function on Transvideo Starlite HD monitor: compatibility with ARRI, RED and Sony cameras.FacebookSteadicam operators group
  85. 2024Electronic spirit levels for video monitors: integrated sensors versus external gyro-stabilized indicators.FacebookThe Steadicam Group
  86. 2024Monitor size choice for lightweight Steadicam® rigs: 5-inch versus 7-inch trade-offsFacebookThe Steadicam Group
  87. 2024New Volt prototype with pan axis: whip pans with telephoto and implications for operator skill.FacebookThe Steadicam Group
  88. 2024MK-V 2-inch gimbal with Tiffen Volt combination: compatibility, cost, and leveling alternatives.FacebookThe Steadicam Group
  89. 2024PRO-Rig with Volt gimbal and short gimbal handle: improper arm angle and thumb reach to gimbal collar.FacebookSteadicam operators group
  90. 2024Socket block mounting height on arms and back vests: navel height versus belt line, and adjustment criteria.FacebookThe Steadicam Group
  91. 2024Comparison of GPI Pro Cine Live and Tiffen M2 camera sleds for broadcast and live event workSled
  92. 2023Reducing vibrations on ARRI Trinity with long camera setup during horizontal post and tilted head at 45 degrees.FacebookArri Artemis Trinity
  93. 2023Balancing an ARRI ALEXA 35 with a Cooke Varotal 18–100 mm T3 zoom on Steadicam®, including low-mode operation and weight reduction.FacebookThe Steadicam Group
  94. 2023Initial equipment specification for ARRI Trinity 2: camera plates, power cables, and battery selection.FacebookArri Artemis Trinity
  95. 2023Flying the ARRI Trinity in X-Mode (Omega-style, camera lateral to body) for table-top passes using tilt control via post rotation.FacebookArri Artemis Trinity
  96. 2023Securing monitor and master grip to Trinity sled via 19 mm clamps in low mode: slippage during fast moves.FacebookArri Artemis Trinity
  97. 2023Maintaining classical leveling technique while using electronic stabilizer heads (Volt, Wave, Cyclo); learning strategy to master both manual and assisted operation.FacebookSteadicam operators group
  98. 2023Budget rig (Flycam Vista II with Zest Pro sled) as a practice platform before a Steadicam® workshop: learning transfer and durability concernsFacebookSteadicam operators group
  99. 2023Buying a 1994 Steadicam® Master Series complete rig for approximately 10,000 GBP as a first rig, and retrofitting it with Volt electronics.FacebookThe Steadicam Group
  100. 2023Mounting non-ARRI cameras (e.g. RED Komodo) on an ARRI Trinity at optical center using stacked riser-plates.FacebookArri Artemis Trinity
  101. 2023Powering an ARRI ALEXA 35 on a Tiffen M1 rig with 24 V: dedicated cable versus battery eliminator trade-offs.FacebookThe Steadicam Group
  102. 2023Minimizing ARRI ALEXA Mini LF total weight for Steadicam® operation by removing or relocating non-essential components.FacebookThe Steadicam Group
  103. 2023ALEXA 35 power cable compatibility with ALEXA Mini/Mini LF cables and sled-mounted battery supplies.FacebookThe Steadicam Group
  104. 2023Mounting an ARRI ALEXA 35 with Zeiss Super Speed lenses on Steadicam® with minimal height: mattebox options and rod support alternatives.FacebookThe Steadicam Group
  105. 2023ARRI Trinity 2: handling preference between Yoke and MasterGrip for non-tilt shots, and monitor holder edge interferenceFacebookArri Artemis Trinity
  106. 2023Remote control setup for ARRI Trinity: OCU-1 and MasterGrip wheel versus standard hand wheels for tilt and roll precision.FacebookArri Artemis Trinity
  107. 2023Play in the gimbal head of a Tiffen M2 with Volt body: causes and tightening procedureFacebookSteadicam operators group
  108. 2023Market saturation for Steadicam® operators: regional variations, direct-to-rig entry, and the role of stabilizer gimbals versus traditional skills.FacebookThe Steadicam Group
  109. 2023Smoking Top Stage on Tiffen M-2 with Volt electronics: failure modes of auxiliary power distribution cables and 3-pin connector ports.FacebookThe Steadicam Group
  110. 2023Low-frequency vibration in ARRI Trinity 2 during pan with tilt down ~45° and post nearly horizontal: design issue or setup.FacebookArri Artemis Trinity
  111. 2023ARRI Artemis 2 sled tilting after 180-degree rotation: gimbal centering tolerance and measurement methodology.FacebookThe Steadicam Group
  112. 2023Sourcing the Mickey dynamic balance tool and its effectiveness for bottom stage setup.FacebookThe Steadicam Group
  113. 2023Eliminating vibration of the Volt control box on ARRI Artemis during full motor load through rigid mounting alternatives to the standard ARRI SSB-3 bracket.FacebookArri Artemis Trinity
  114. 2023SmallHD Cine 7 with integrated Bolt 6 transmitter as a Steadicam® monitor: weight savings versus system lock-in and transmitter placement strategy.FacebookSteadicam operators group
  115. 2023Spin-test comparison: ARRI Artemis 2 gimbal versus Tiffen M2 with retrofit PRO bearing for free rotation.FacebookSteadicam operators group
  116. 2023Spring preload order on PRO Titan arm with two blue and two black springs under heavy camera load.FacebookSteadicam operators group
  117. 2023Comparison of SmartSystem Arm X1, Tiffen G50X/G70X, PRO Arm, and Flowcine Xarm: performance, reliability, and selection criteria.FacebookSteadicam operators group
  118. 2023Using gyroscopes with Volt camera stabilizersGeneral Discussion
  119. 2022Squeaking arm springs: causes in trunnion assembly versus springs themselves, and correct lubrication methods.FacebookSteadicam operators group
  120. 2022GPI PRO Gen III: 5 A fuse on battery plate tripping before 10 A sled main circuit breaker when D-Tap wired as primary power feed.FacebookThe Steadicam Group
  121. 2022Protecting an ARRI Artemis Trinity sled from rain during operationFacebookArri Artemis Trinity
  122. 2022Transporting a complete Steadicam® rig to the airport and flying: practical options for ground transport, checked baggage, and tracking.FacebookSteadicam operators group
  123. 2022Horizon control for new operators: gimbal placement, drop time, hand technique, and practice drillsFacebookSteadicam operators group
  124. 2022Snaking (lateral drift and parallax) in ARRI Trinity Javelin mode: causes, post-correction limits, and mitigation techniques.FacebookArri Artemis Trinity
  125. 2022Executing very slow Steadicam® moves at constant speed without visible footsteps, comparable to dolly work.FacebookSteadicam operators group
  126. 2022Achieving stable lock-offs (static end frames) by releasing rig control and using body position instead of hand tension.FacebookSteadicam operators group
  127. 2022ARRI Trinity system: practical strengths, weaknesses, economics, and return on investment versus traditional Steadicam®.FacebookThe Steadicam Group
  128. 2022Choosing a first major stabilizer rig: Tiffen Steadicam®, GPI PRO, or small-maker sled (Calicocam), budget and features considered.FacebookThe Steadicam Group
  129. 2022Budget entry-level rigs and dynamic balancing technique: Proaim Zest Pro versus quality brands, and the Mickey-method for balancing.FacebookSteadicam operators group
  130. 2022Selecting a used Steadicam® rig under 20 lb capacity for RED Komodo with larger lenses and follow focus.FacebookSteadicam operators group
  131. 2022Powering ARRI ALEXA Mini or Mini LF from Steadicam® sled at 24 V versus 12 V: electrical efficiency versus practical workflowFacebookThe Steadicam Group
  132. 202212G-SDI connector protection on the ARRI ALEXA 35 at the sled, and mounting the camera while ARRI plates are unavailable.FacebookThe Steadicam Group
  133. 2022Insurance and liability red flags in corporate and live-event operator contracts: when to negotiate or decline.FacebookSteadicam operators group
  134. 2022Carrying heavy camera rigs with the Zephyr vest from the Steadicam® M2 kitFacebookThe Steadicam Group
  135. 2022Alexa 35 power undervolage alarm on Tiffen M2 sled: 24V cable vs. 12V cable misidentification, and power budget validation.FacebookSteadicam operators group
  136. 2022Whether the ARRI Artemis 1.74-inch center post for the Tiffen M1 Volt gimbal is a turned-down 1.8-inch post or a purpose-built component.FacebookArri Artemis Trinity
  137. 2022Weight reduction strategies for Steadicam® rig with Sony Venice and heavy Fujinon zoom lens.FacebookThe Steadicam Group
  138. 2022Axial play in the Tiffen M1 gimbal after bearing replacement and tightening—when is it still within spec?FacebookThe Steadicam Group
  139. 2022Tilt motor noise and unusual feel on Tiffen Volt after one year of use: encoder replacement, gimbal re-centering, and balance protocol.FacebookThe Steadicam Group
  140. 2022Sourcing a replacement pan bearing for a Tiffen sled when PRO no longer sells them individuallyFacebookSteadicam operators group
  141. 2022Grip tape and wrapping options for gimbal handles: alternatives to factory finish.FacebookSteadicam operators group
  142. 2022Volt versus Betz Wave 1: sled length, weight, tilt hold, mechanical versus electronic stabilization, and outdoor robustness.FacebookSteadicam operators group
  143. 2022Recentering a GPI PRO Gimbal after Volt conversion: counterweight adjustment and trunnion selection.FacebookSteadicam operators group
  144. 2022PRO Arm socket block fracture at the rod end bearing: size, cause, and prevention strategies.FacebookSteadicam operators group
  145. 2022Power distribution options for Tiffen Steadicam M2 when operating with Alexa 35 cameraSled
  146. 2022Gimbal compatibility with Fujifilm X-T2 camera and lensGeneral Discussion
  147. 2021Balancing the Betz Wave sled: Wave Rider versus XCS-LT plate with riser solutionFacebookSteadicam operators group
  148. 2021Gyro stabilizers (Kenyon 4x4 vs. 6x6) on a Steadicam® sled for long live-show work with a 5 kg camera package.FacebookSteadicam operators group
  149. 2021Low-mode monitoring options for Steadicam® M-1: dedicated monitor versus repositioning the main monitor.FacebookSteadicam operators group
  150. 2021Choosing between a used Steadicam® Zephyr (23 lb payload) and a factory-refurbished Glidecam X-30 (32 lb payload) as an entry-level rig for RED Komodo and future heavier cameras.FacebookThe Steadicam Group
  151. 2021Steadicam® Zephyr with Panasonic VariCam LT: weight management, gimbal stress, and configuration to prevent breakage.FacebookSteadicam operators group
  152. 2021Rigging a RED Komodo on Steadicam®: weight distribution, arm setup, and rig choice for a compact, lightweight camera.FacebookSteadicam operators group
  153. 2021Flying an ARRI ALEXA 65 on Steadicam®: weight, power supply voltage and mounting plate optionsFacebookSteadicam operators group
  154. 2021Mounting V-Mount power and monitor beneath a Flycam Galaxy sled, and rigging a Nucleus-M wireless focus system for solo pulling without an AC.FacebookSteadicam operators group
  155. 2021Choosing between a dedicated lightweight focus system and integrating the AC's Preston setup on ARRI Trinity: balance, workflow, and motor compatibility.FacebookArri Artemis Trinity
  156. 2021Front-mount versus back-mount vests for doorways and tight passages: ergonomics, bulk, and arm folding behaviour.FacebookThe Steadicam Group
  157. 2021Mounting a Betz Wave on a Tiffen Archer 2: feasibility with small top stage and lightweight bottom stage.FacebookThe Steadicam Group
  158. 2021Modernizing an Ultra-2 sled: removing the nose, upgrading connection boxes, choosing between Volt or other gimbals, and Bottom-Stage modifications.FacebookSteadicam operators group
  159. 2021Widescreen monitor selection for Steadicam® with high brightness (2000 nit) and integrated leveling tools.FacebookThe Steadicam Group
  160. 2021TVLogic F7-H Mk2 as Steadicam® monitor for Zephyr and future larger rigs: brightness and color accuracy versus SmallHD 703 Ultra BrightFacebookThe Steadicam Group
  161. 2021M2-Volt gimbal compatibility with GPI-PRO-1-HD sled and control box configurationFacebookThe Steadicam Group
  162. 2021Volt gimbal on a GPI PRO sled: spare parts and accessories to order with the rig.FacebookThe Steadicam Group
  163. 2021Lubricating gimbal bearings on the Tiffen M1: ARRI-supplied oil versus Finish Line Wet and Tri-Flow alternatives.FacebookThe Steadicam Group
  164. 2021Centering and balancing a gimbal on an entry-level sled (Glidecam X-Series): learning rig versus upgrade path.FacebookThe Steadicam Group
  165. 2021Comparative handling of NB Stabilizer Arm versus PRO Arm and Flowcine Xarm: stiffness, responsiveness, and fatigue.FacebookThe Steadicam Group
  166. 2021Optimal arm height on the vest body and its effect on sled balance and controlFacebookSteadicam operators group
  167. 2021Cleaning and lubricating the pan bearing in a Steadicam® Ultra 2 gimbal: solvent, oil quantity, and distribution method.FacebookThe Steadicam Group
  168. 2021Upgrading the pan bearing in the Tiffen Steadicam® M2 Volt gimbal: comparison with PRO gimbal bearings and Kaydon supplier changes.FacebookThe Steadicam Group
  169. 2021Comparison of Tiffen G50x/G70x steadicam arms versus Smart System X1 arm for stabilization workGeneral Discussion
  170. 2021Purchasing advice for a used Archer 2 Steadicam rig with Volt stabilizer as a first professional setupGeneral Discussion
  171. 2021Trade-offs between extending telescoping posts for longer rigs versus keeping camera stabilizers compactSteadi-Newbies
  172. 2020Achieving lowmode lens height on a 43 lb Sony Venice Panavision Rialto rig without antlers, using inverted body placement.FacebookThe Steadicam Group
  173. 2020Cleaning and lubricating the pan bearing (gimbal head) on Steadicam® Volt systems to restore smooth lock-offsFacebookSteadicam operators group
  174. 2020Gimbal handle length trade-offs for camera operationOperating
  175. 2020Practical strategies for wearing masks and face shields while operating Steadicam during pandemic safety protocolsGeneral Discussion
  176. 2020Advice for new Steadicam operators starting their careerSteadi-Newbies
  177. 2020Availability of Volt stabilizer compatible with 2-inch gimbal postsWave/Volt
  178. 2020Combining a Steadicam Zephyr with a motorized gimbal for stabilized camera workGeneral Discussion
  179. 2020Steadicam Proline equipment quality and practicality compared to established brandsGeneral Discussion
  180. 2020Gimbal power loss after exposure to water or rain despite protection measuresWave/Volt
Show more
Ask about Still argued aboutThe answer cites the archive